Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

On the microhardness testing of electrically stressed poly(phenylene oxide): Polystyrene blends

Microhardness measurements have been performed on untreated (virgin) and electrically stressed, solvent‐cast laboratory‐prepared samples of pure poly(phenylene oxide) (PPO), pure polystyrene (PS), and PPO : PS polyblends with different weight proportions. Results of such measurement on untreated polyblend sample show that microhardness (H_v) increases with increase in the content of PS up to 10 wt %, which attributed to the existence of homogeneous phase morphology. However, this feature is not observable in samples containing higher content of PS. Electrical stress is found to modify considerably the mechanical property of polymer. The effect of electric field on the microhardness of such samples (PPO : PS :: 90 : 10) has been characterized by the existence of a peak. Trapping of charge carriers in electrically stressed samples imparts hardening to the polyblend up to an applied step field of 190 kV/cm. However, the excessive charging beyond this step field value destroys this characteristic. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

电容比和方向性对自给能γ剂量计探头的影响

本文给出了自给能γ剂量计探头在γ射线照射下积累电荷的测量结果，讨论了电容比和方向性对自给能γ剂量计探头的影响以及探头的饱和点。     

Physical Properties Important to Electrostatic and Non electrostatic Powder Transfer Efficiency in a Tumble Drum

ABSTRACT: Popcorn was oiled and coated in a tumble drum nonelectrostatically and electrostatically with sugar, cornstarch, salt, cellulose, maltodextrin, all-purpose flour, whole-wheat flour, or soy flour. Particle size, density, flowability, and chargeability were correlated to transfer efficiency using regression analysis. Of the various methods to measure chargeability, charge-to-mass and adhesion improvement were the most significant. For nonelectrostatic coating, small, dense, free-flowing powders were most efficient. Small, free-flowing highly charging powders were most efficient for electrostatic coating. Percent improvement was the highest for the least efficient powders. The greatest benefit with electrostatic coating was for low density, highly charging powders with no effect of size.     

日产1000t水泥熟料生产线的提产措施

通过对五级旋风筒下料管、回转窑转速、配料方案、物料稳定等四方面进行改进,达到提产目的。     

Pulsating Jet Impingement Heat Transfer Enhancement

This article presents results from a numerical study of pulsating jet impingement heat transfer. The motivation is to seek conditions offering a significant enhancement compared to steady flow impingement drying. The CFD software package FLUENT was used for simulating slot-type pulsating jet impingement flows with confinement. The parameter study included velocity amplitude ratio, mean jet velocity, and pulsation frequency. The distance from nozzle exit to surface was three times the hydraulic diameter of the nozzle. The Reynolds number based on the nozzle hydraulic diameter and jet temperature was 2,460 with a mean jet velocity of 30 m/s, which is the base case of the numerical experiments. Results showed that time-averaged surface heat transfer increased with increasing velocity amplitude for the same mean jet velocity. Large velocity amplitudes helped enhance heat transfer by two mechanisms: high jet velocity during the positive cycle and strong recirculating flows during the negative cycle. For the cases with different mean jet velocities but the same maximum velocity, time-averaged surface heat flux decreased with decreasing mean jet velocity. As for the effects of pulsation frequency, with high-velocity amplitude ratio, time-averaged surface heat fluxes were at the same level regardless of frequency. However, at low-velocity amplitude ratio, high frequency caused stronger recirculating flows resulting in greater heat transfer compared to the cases with a lower frequency.     

单孔护壁爆破数值模拟

运用LS-DYNA软件对单孔护壁爆破和切缝药包爆破进行了三维数值模拟,结果显示,由于PVC-U套管的存在,作用于孔壁的爆炸应力波峰值被显著削弱,降低率达到30%～46%,并推迟了其到达保留岩体孔壁时间.与传统的切缝药包爆破相比,保留岩体损伤更小.     

污水射流曝气工艺技术在聚驱中的应用

为了减少油田污水外排，应用油田采出的污水配制和稀释聚合物溶液，需要对污水进行曝气处理，通过小型试验和现场应用，对应用射流曝气技术处理油田污水的工艺和效果进行了可行性研究和试验，研究表明应用射流曝气技术处理油田污水，可以达到曝氧站的处理效果，经过射流曝气工艺处理的污水所配制和稀释的聚合物溶液粘度能够满足聚合物驱油的注入要求，并且可以大幅度降低地面工程建设投资，取得较好的经济效益和社会效益。     

等温脉冲自由射流压力场动态特性的实验研究

针对冶金工业过程脉冲燃烧及脉冲流技术所进行研究的基础部分,借助于计算机辅助信号分析手段,运用湍流统计理论,对等温脉冲自由射流压力场动态特性进行了系统的实验研究。实验的Re范围为19486～93936,st范围为0～0.057,所对应的射流脉冲频率为0～25Hz。研究结果表明;脉冲射流极大地提高了射流区压力波动水平,任何受气体的动量、热量和质量传递制约的工业过程均可望通过适当地采用脉冲流技术加以强化.     

条形药包药量计算公式探讨

本文通过现有诸药量计算公式的总结和统计分析，认为经验函数划（ｎ）以二次式较合适。并根据流体动力学理论和临界能量密度破碎准则，推导出ｆ（ｎ）的二次项公式，得ｑ＝ＫＷ２（１十ｎ２）／２；该式较符合实际，故推荐供参考。