热流体喷射变形机理与喷嘴结构

高速短程纺技术能生产三维卷曲短纤维,该技术的关键之一是热流体喷射装置。本文介绍了热流体喷射装置的演变与特点及它的加工机理和某些已应用的实际装置。     

Halogen-induced charge transfer polymerization of pyrrole in aqueous media

Simultaneous polymerization and doping of pyrrole have been carried out in the presence of a halogenic electron acceptor, bromine (Br₂) or iodine (I₂), in aqueous dispersion or in a two-phase solvent system. The morphology of the polypyrrole (PPY) so produced is granular and porous. The electrical conductivity of the PPY-I₂ charge transfer (CT) complex is of the order of 10¹ ohm⁻¹ cm⁻¹ while that of the PPY-Br₂ complex is about one order of magnitude less. Both complexes are stable in the atmosphere. The physicochemical properties of the PPY-I₂ and PPY-Br₂ CT complexes prepared under various experimental conditions are examined in detail.     

Chemistry and Physics of Alkali Metals on MoS2 Surfaces

The interaction of alkali metal with surfaces has been of great interest to the community of catalysis since alkali metal can play an important role as a promoter. On alkali-doped MoS₂, such a promotion effect of alkali metal has been exemplified in the direct synthesis of linear alcohols from CO and H₂, where the alkali-doping switches the catalyst selectivity from methanation to alcohol synthesis. This paper reviews recent high-resolution X-ray photoelectron spectroscopy experiments that have provided direct observation of electron transfer from alkali metals to a model single crystal MoS₂ and the capture of the supra-valence electrons in the subsequent oxidation reactions.     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

DC-DC电荷泵的研究与设计

以Dickson电荷泵的基本原理为出发点，研究了一种将正电压输入转为负电压输出的开关电容电路。由于开关电容的充放电特点，为确定电容时间常数，采用非交叠时钟控制信号避免了由于时钟交叠而造成的当电容充电还未完成即对下一级电容进行放电的现象。同时，参考功率MOS-FET的电容模型通过增大驱动电路的电流减小了开关管的上升延时，提高了开关动作的速度，使转换效率得到明显提高。此电路结构简单，性能优良，易于集成，可广泛应用于输出负电压的电源产品中。     

无捻毛巾产品毛羽问题的分析与实践

对无捻毛巾产品毛羽问题进行了分析,对成因进行了初步探索.通过试验,制定了较为有效的改进措施和工艺.无捻毛巾制品的毛羽问题得到改善,并控制在一个较为合理的范围内.     

LC4L-20增压中冷柴油机的研制

介绍了LC4L-20增压中冷柴油机的性能与结构特点，着重分析了增压中冷技术，及各主要运动件的可靠性设计。     

影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

平面药包抛掷爆破的漏斗特征解析

根据惠州港通用码头陆域平面药包抛掷爆破的实爆堆积测量分析成果 ,结合药包设计的主要参数 ,对平面药包产生的爆破漏斗的范围与形态、不同药包部位的残方比与抛掷率、药包的长抗比与圆柱体药包的应力波形演变关系予以解析 ,供硐室爆破的理论研究、模拟试验和总结条形药包特性时参考     

可控环量船用翼的数值模拟和试验研究

本文提出一种可控环量船用翼数值模拟方法,其计算结果与最近Mclachlan的试验数据十分吻合。通过本文的计算,对广泛引用的Kind ＆ Maull的二维试验数据提出了修正。根据本文所作的三维可控环量帆翼的试验结果,与二维计算值的比较,指出它们之间所存在的显著差别。