支持向量机在交通量预测中的应用

交通量预测对于区域交通规划有重要意义。提出一种基于支持向量机理论的交通量预测方法。该方法以统计学习理论为基础，通过和BP神经网络进行比较的实验，证明其在交通量预测中的有效性。     

On Striping Traffic over Multiple IEEE 802.11(b) Wireless Channels

Due to interference, path loss, multipath fading, background noise, and many other factors, wireless communication normally cannot provide a wireless link with both a high data rate and a long transmission range. To address this problem, striping network traffic in parallel over multiple lower-data-rate but longer-transmission-range wireless channels may be used. In this paper, we propose a new striping method and evaluate its performances over multiple IEEE 802.11(b) channels under various conditions. Our extensive simulation results show that this method is quite effective for such an application. S.Y. Wang is an Associate Professor of the Department of Computer Science and Information Engineering at National Chiao Tung University, Taiwan. He received his Master and Ph.D. degree in computer science from Harvard University in 1997 and 1999, respectively. His research interests include wireless networks, Internet technologies, network simulations, and operating systems. He is the author of the NCTUns 2.0 network simulator and emulator, which is being widely used by network and communication researchers. More information about the tool is available at http://NSL.csie.nctu.edu.tw/nctuns.html. C.H. Hwang received his master degree in computer science from NCTU in 2002 and currently is working for a network company. C.L. Chou currently is a third-year Ph.D. student at the Department of Computer Science and Information Engineering, National Chiao TungUniversity (NCTU), Taiwan. He received his master degree in computer science from NCTU in 2002.     

基于人文关怀的信号配时方法研究

在传统的信号配时中，都是以减少车辆的总延误为目标，这样并不能很好地体现出整个社会中人的时间价值。现以减少所有通过交叉口的出行者的总延误为目标，在传统的信号配时方案的基础上，提出了一套新的配时方案，同时以减少全部出行者的总延误时间为目标给出了相应的延误评价公式，最后以杭州市文一路-古翠路口的实测交通数据进行分析，论证了本配时方案的有效性。     

POWER OPTIMIZATION OF FINITE STATE MACHINE BASED ON GENETIC ALGORITHM

Using state assignment to minimize power dissipation and area for finite state machines is computationally hard.Most of published results show that the reduction of switching activity often trades with area penalty.In this paper,a new approach is proposed.Experimental results show a significant reduction of switching activity without area penalty compared with previous publications.     

PbZr0.52Ti0.48O3薄膜红外椭圆偏振光谱研究

用磁控溅射法在Pt/Ti/SiO2 /Si衬底上制备了PbZr0 .52 Ti0 .4 8O3(PZT)薄膜 .XRD结果表明经过退火后的PZT薄膜呈现多晶结构 .通过红外椭圆偏振光谱仪测量了λ为 2 .5～ 12 .6 μm范围内PZT薄膜的椭偏光谱 ,采用经典色散模型拟合获得PZT薄膜的红外光学常数 ,同时拟合得到未经处理的PZT薄膜和退火后PZT薄膜的厚度分别为 45 4.2nm和 45 0 .3nm .最后通过拟合计算得到结晶PZT薄膜的静态电荷值为 |q|=1.76 9± 0 .0 2 4.这说明在磁控溅射法制备的PZT薄膜中 ,电荷的转移是不完全的 .     

Methodologies for characterizing traffic in wide area networks: Analysis and benchmarking

Since computer networks play an important role in distributed computing environments, an application's performance depends heavily on the quality of service provided by the communication networks. To ensure a high performance, the characteristics of wide area networks, WANs, must be well understood. This paper presents methodologies to characterize WAN traffic based on real measurements from Bellcore's backbone network that connects remote sites using dedicated T1 links. This paper also suggests some workload models that can be used for wide area network sizing and performance evaluation studies. It is found that the inter-site traffic pattern depends on the time of the day and the day of the week. Furthermore, the traffic between two sites is found to be reasonably symmetric, except for those sites designated as back-up sites. The coefficient of variation is used as a measure for the traffic burstiness and it is found to be 1·5 degree during working hours. The methods presented here are easy to use and cost-effective.     

用欢喜岭油田低凝稠油生产AH-90重交通道路沥青

针对欢喜岭油田低微稠油的特点，采用常压蒸馏—氧化沥青联合装五的工艺流程，生产出AH-90重交通道路沥青。经测试表明，各项性能均达到我国现行重主通道路沥青技术指标。在高温稳定性、低温抗裂性等方面都优于新加坡壳牌沥青。是一种优质的道路沥青。     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

B－ISDN中的拥塞控制技术

Ｂ－ＩＳＤＮ是现代电信网的发展方向，拥塞控制技术则是其中的一个重要问题。由于Ｂ－ＩＳＤＮ采用新的信息传递方式──ＡＴＭ，使传统的拥塞控制方法不再适用。本文依据ＩＴＵ－Ｔ有关建议的最新内容对Ｂ－ＩＳＤＮ拥塞控制的基本思想、工作机制以及其中的主要功能作了较为详细的分析讨论，并提出了一些Ｂ－ＩＳＤＮ拥塞控制技术中尚需进一步研究的问题。     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.