具有控制项的限定记忆卡尔曼滤波器

在已有的限定记忆卡尔曼滤波器的基础上 ,将确定性先验信息作为控制项加以应用 ,推导出了完整的限定记忆卡尔曼滤波公式 ,从而在记忆长度确定的情况下 ,有效地减小了模型不准的误差 ,降低了滤波总误差。仿真同样表明了该方法的有效性     

Social Support and Social Strain Among Husbands and Wives: A Multilevel Analysis.

In response to recent calls in the literature for within-person examinations of social support processes over time, this study explores the relationships of spousal support, spousal strain, and well-being among husbands and wives, both within the same day and across days. Eighty-three couples were interviewed and completed a structured diary twice daily for 1 week. The results of multilevel hierarchical modeling suggest that both spousal support and spousal strain made significant, independent contributions to concurrent negative affect, although only spousal support was a significant predictor of next-day negative affect. Spousal strain interacted with spousal support to predict next-day negative affect. Direct and moderating effects of perceived marital adjustment on negative affect were discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

载体比表面积及孔径对Nb_2O_5/α-Al_2O_3催化剂酸性及反应性能的影响

采用浸渍法制备了Nb2O5/α-A l2O3催化剂(简称催化剂)并用于环氧乙烷水合制乙二醇的反应,通过控制α-A l2O3载体中致孔剂的含量来调变载体的孔径、孔分布及比表面积;采用吡啶吸附红外光谱、氨程序升温脱附法研究了载体的比表面积及孔径对催化剂酸性及反应性能的影响。实验结果表明,产物的选择性受扩散因素及催化剂酸性的影响,而催化剂的酸量、酸密度可以通过载体的孔径及比表面积的变化加以调控。比表面积较小及孔径较大的载体对催化剂催化环氧乙烷水合制乙二醇的反应较为有利。当载体的比表面积小于0.80m2/g、孔径为4.00~8.00μm时,在反应温度160℃、反应压力1.5M Pa、n(H2O)∶n(EO)=22、液态空速25h-1的条件下,环氧乙烷的转化率大于99.8%,乙二醇的选择性超过89.9%。     

基于支持向量机的缓存预估模型的设计与实现

采用支持向量机(SVM)对网络业务流数据进行预测估计，通过训练样本，从而获得样本以外数据的分布规律。在此基础上，设计了一种网络排队队列缓存的预估模型。实验表明，该模型具有较高的训练效率和很高的估计精确度。     

多分量波场的矢量法叠前深度偏移技术

本文研究了二维各向同性介质中两分量记录的矢量法叠前深度偏移方法———叠前逆时深度偏移方法。首先从弹性波波动方程出发,在交错网格空间中推导了各向同性介质中弹性波逆时延拓的高阶有限差分格式;然后从程函方程出发,采用逆时差分格式求解地下各点的地震波走时。为确保算法满足地震波传播的因果性条件及其对复杂模型的适应性,用扩展波阵面算法追踪波前并搜索全局极小,以上述方法的计算结果作为弹性波逆时偏移的成像条件,实现二维多分量资料的叠前逆时深度偏移。模型试算和实际单炮记录试验表明,叠前逆时深度偏移方法考虑了地震波的矢量特征,是一种有效的矢量波场处理技术。     

凝胶成型法制备加氢催化剂载体的研究与工业化生产

采用凝胶成型法制备加氢催化剂载体，并进行了工业放大试验。通过BET、NH3-TPD、H2-TPR等表征手段及实际的加氢反应性能评价对凝胶成型法制备的载体及加氢催化剂与常规方法进行对比分析，结果表明，采用凝胶成型法所制得的载体及催化剂均具有较高的孔体积和比表面积、较低的堆密度，其机械强度可满足工业要求，总酸量及中强酸酸量得到提升，催化剂活性组分与载体强结合力得到削弱，金属利用率提高，应用性能明显优于传统方法制备的加氢催化剂载体。通过该方法完成了加氢催化剂载体的工业生产，所生产的载体应用于天津院THDS-3加氢精制催化剂取得了良好的工业应用效果。     

线光栅扫描实现衍射图形的矢量化直写

在双光束激光直写系统中,衍射光变图像的光刻是逐像素点进行的.本文提出在该系统中采用狭缝获得光栅线来进行衍射图形的直写,利用一种改进的矢量文件格式,使平台沿着垂直光栅线的方向运动,获得连续的多光点同时直写,直写后的衍射光栅线是连续的,系统的运行效率是逐点光刻的几十倍.编写了与DXF文件的接口直写控制程序,给出了实验结果.     

一种有效的并行汉字／字符串相似检索技术

本文提出了一种有效的并行汉字／字符串相似检索技术．通过引入搜索状态向量及字符一模式匹配向量，该技术将字符串匹配比较转化为简单的整数字位运算，通过对字符串方向相反的搜索有效地实现了多处理机对汉字／字符串的并行相似检索．文中也给出了并行实现算法，同时分析了算法的复杂性．     

中低速率语音波形编码

提出了一种波形编码的新方法，阐述了其编码原理。该编码算法简单，恢复的语音质量较好。由于利用了矢量量化技术，所以该编码速率较低。     

Nitric oxide reduction and carbon monoxide oxidation over carbon-supported copper-chromium catalysts

Carbon supported copper-chromium catalysts are shown to be very active for both the reduction of nitric oxide with carbon monoxide and the oxidation of carbon monoxide with oxygen. Mixed copper-chromium oxide active phases have good activity in the simultaneous removal of nitric oxide and carbon monoxide from exhaust gases. The influence of several catalyst variables has been investigated. The activity per volume of catalyst increases with increasing loading, while the intrinsic activity shows a maximum around C/M=100−50. An optimum catalyst for nitric oxide reduction and carbon monoxide oxidation has a copper/chromium ratio of 2/1. The apparent activation energy for the carbon monoxide oxidation over carbon supported copper-chromium catalysts is 77 kJ/mol, suggesting that the Cu---O bond rupture is the rate-limiting process. The reduction of nitric oxide takes place at higher temperatures. Since all catalysts have a low selectivity for molecular nitrogen formation at lower temperatures, the dissociation of nitric oxide is probably rate determining, resulting in a slightly reduced catalyst system. In an excess of carbon monoxide the reaction is first-order in nitric oxide and zero-order in carbon monoxide. Moisture inhibits the reaction by reversible competitive adsorption, whereas carbon dioxide does not. Oxygen completely inhibits the reduction of nitric oxide due to the more rapid reoxidation of the catalytic sites compared to nitric oxide. Therefore, the reduction of nitric oxide takes place only when all oxygen has been converted and, hence, is shifted to higher temperatures. As a possible consequence, the production of nitrous oxide is reduced. Nitric oxide and molecular oxygen react preferentially with carbon monoxide, so, in an excess of oxidizing component, gasification of the carbon support occurs at higher temperatures after carbon monoxide has been completely consumed.