国内外改质沥青生产的现状及其发展

煤焦油沥青是炼铝及碳素工业的重要原料之一，它地质量如何直接影响到制品的技术经济指标。近年来，随着科学技术的发展，煤焦油沥青重整改质技术引起重视。目前已有许多国家已生产出改质沥青来满足制取电炉炼钢超高功率电极以及制品铝电解板的要求证同国内对此也开始进行研制工作。介绍了国内外改质沥青生产的现状及发展，并提出了参考建议。     

新型环氧树脂绝缘浸渍胶（WSK）在微特电机上的应用

介绍了新型环氧树脂少溶剂快干绝缘浸渍胶的性能试验数据及基在微特电机上的应用及注意事项。     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

On the curing of a vinylester-urethane hybrid resin

Curing kinetics of a vinylester-urethane hybrid (VEUH) resin consisting of vinylester resin (VE) diluted in styrene and novolac type polyisocyanate (NPI) have been studied by differential scanning calorimetry (DSC). As VEUH is crosslinked via free radical polymerisation between the vinyl functions of styrene and VE, and polyaddition reaction between the secondary -OH groups of VE and -NCO of NPI, it was necessary to study these reactions separately. This was achieved by studying the curing with and without incorporating the NPI. The curing reaction was monitored by measuring the heat of reaction under isothermal and dynamic temperature conditions. Models describing the curing were developed, which are in good agreement with the experiments. A comparison between the curing of the VEUH and the VE resin without NPI leads to the conclusion that the curing of the VEUH as accessed by DSC is dominated by the radical polymerisation of styrene with VE although the two reactions are not time separated.     

尿素熔融喷浆造粒工艺在复合肥生产过程中存在的问题及对策

介绍在团粒法工艺的基础上，将尿素熔融成尿液进行喷浆造粒生产复合肥的过程中，存在的问题，原因及解决的对策。     

SBS APP复合改性沥青的研究

采用SBS、APP复合改性渣油,可以得到性能优良的改性沥青材料。其最佳配料和共混工艺条件为:SBS/(SBS+APP)之比0.4、外掺量20%、转速1930rPm、共混时间1.0 hr,共混温度20℃。     

新型难燃输送带胶粘剂的研制

以改性氯丁橡胶为主料、多异氰酸酯为固化剂制成的新型难燃输送带胶粘剂,具有粘接强度高、耐热性好、干燥时间短、难燃等特点,在常温常压下粘接输送带接头,固化30min即可负荷运行。     

一种新型硫酸亚铁单液法调剖剂

本文提出用尿素作为ｐⅡ调节剂，加快硫酸亚铁单液法调剖剂中亚铁离子在地层温度下的沉淀，增大沉淀率，提高封堵效能。岩芯流动试验结果表明，１５％ＦｅＳＯ４．７ＩＩ ２Ｏ／５％尿素调剖剂体系的封堵能力比不含尿素的体系增大近一倍。     

An improved enzymic method for the determination of native and modified starch

An improved method for the determination of starch by sequential hydrolysis with thermostable bacterial α-amylase and fungal amyloglucosidase is described. Glucose was determined colorimetrically by a glucose oxidase-peroxidase-chromogen system at pH 7. Native normal and waxy starches, and distarch phosphate, gave quantitative yields of glucose with a high degree of precision (coefficient of variation less than 1%). Acetylated distarch phosphate, high-amylose starch and retrograded amylose were initially treated with 1M NaOH for 30 min, then neutralised and analysed successfully as normal starch. Oxidised starch did not give a quantitative yield of glucose because of the presence of dicarboxylic groups in the polymer. For samples containing normal and waxy starch the analysis was carried out in about 4 h. The method was applied to a range of starch-containing foodstuffs and the results are reported.     

MBS树脂改性PVC的研究

研究了不同类型及用量的MBS树脂对PVC抗冲击性、光学性能、拉伸性能及加工塑化性能的改性效果以及加工条件等因素的影响。结果表明 :在低用量条件下 ,随MBS树脂含量增加 ,MBS/PVC抗冲击性能有所提高 ,光学性能略有下降。此外 ,MBS/PVC制品的拉伸性能和加工性能受MBS树脂类型及用量影响不大。