在酸性介质中N-H伪酸Mannich反应机理的量子化学研究

用量子化学中的ＳＣＦ－ＭＯＡＭ１方法，全优化计算了以苯并唑酮为伪酸组分的（Ｎ－Ｈ酸）Ｍａｎｎｉｃｈ反应的反应物、过渡态和产物络合物的分子几何构型、电子结构和生成热。根据计算所得各反应的活化能，提出了该反应在酸性介质中的机理，即甲醛首先与苯并唑酮作用，其产物再与二甲胺作用生成Ｍａｎｎｉｃｈ碱，并就其缘由进行了讨论。     

用迁移率和载流子浓度研究碲镉汞中的深能级

获得了一种研究碲镉汞深能级的方法。通过分析迁移率 载子浓度与温度的关系，可以得到关于深能级的重要依据。     

顺丁橡胶后处理新型交替运输机

在顺丁橡胶后处理生产线上，用处行开发的新型交替运输取代原有运输机。试用结果表明，采用新型交替运输机后，胶块的导向到位率由７０％提高到９８％；减轻了劳动强度，提出了生产开工率，运行周期可达１ａ以上。     

CDMA基带信号发生器设计与仿真

主要研究了CDMA蜂窝通信系统的工作原理，且以基于IS－95标准的前向链路为主。利用MATLAB软件建立了前向链路中各器件的模块，实现了CDMA基带信号发生器，并在时域及频内进行了测量。     

一种E1与V.35信号转换的实现方法

E1 是我国和欧洲电信传输网一次群使用的传输标准，V.35 是我国数字数据网使用较多的一种接口标准。本文给出由DS2155 和DS2175 等芯片实现E1 接口与V.35 接口转换的方法。     

HL-1M装置的真空运行与质谱诊断

通过对 HL- 1M装置真空运行模式、真空运行参数、氦辉光放电清洗和硅化壁处理手段等的规范化 ,显著地改善了装置的真空壁出气、本底杂质浓度、托卡马克放电杂质出气比和再循环 ,成功地实现了高参数放电、长脉冲放电和装置暴露大气后快速恢复放电 ,并成功地为演证低混杂电流驱动、离子回旋共振加热、电子回旋共振加热、中性束注入、弹丸注入和分子束注入实验和升级等离子体运行等提供了良好的真空壁条件。描述了 HL- 1M装置真空系统、壁出气和再循环控制、质谱诊断和程序脉冲送气等方面的主要实验成果 ,并为 HL- 2 A装置的真空系统研制和运行提供了有益的参考     

Best L1 Piecewise Monotonic Data Modelling

Let us consider n data measurements of a univariate process that have been altered by random errors. We assume that an underlying model function has a substantially smaller number of turning points than the observed ones. We propose algorithms that make least the sum of the moduli of the errors by requiring k monotonic sections, alternately increasing and decreasing, in the sequence of the smoothed values. The main difficulty in this calculation is that the optimal positions of the joins of the monotonic sections have to be found automatically among so many combinations that it is impossible to test each one separately. Moreover, the calculation seems to be very intractable to general optimization techniques because O(n^k) local minima can occur. It is shown that dynamic programming can be used for separating the data into optimal disjoint sections of adjacent data, where each section requires a single L₁ monotonic calculation. This procedure is highly efficient, requiring at most O(kn²) computer operations and O(n) best L₁ monotonic calculations to subranges of data for a global minimum.     

Si_（1－x）Ge_x／Si定向耦合器的研制

在运用ＳｉＧｅ脊形波导单模条件和有效折射率法分析ＳｉＧｅ／Ｓｉ定向耦合器结构参数的基础上，采用分子束外延和各向异性腐蚀技术制备出Ｓｉ１－ｘＧｅｘ／Ｓｉ（ｘ＝０．０５）单模定向耦合器．在波长为１．３μｍ时，平均串音小于－１８．１ｄＢ，输出功率耦合效率达到９８．１％     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

CDMA 1X PDSN分组数据网安全性分析及解决方案

首先从CDMA1X网络结构进行详细分析,引出CDMA1X网络安全风险分析。根据网络安全原理,联系江西联通现在CDMA1X网络结构,采取对每层安全进行预防,提出较详细的网络安全解决方案,最后对现网进行安全评估。