API Spec 5L的发展过程及最新进展（上）

油气管道建设从最初的工业管道至今已经历了一个多世纪的发展。API Spec 5L管线钢管规范自1928年发布第1版起至2007年发布第44版也经历了近80年的发展进程。该规范经分、合、再整合的不断修改与完善，已成为油气管道输送用钢管的国际通行标准。API Spec 5L第44版于2007年10月1日出版．2008年10月1日生效，第一次与ISO 3183：2007（第2版）等同合版发布。介绍了API Spec 5L的发展历程，APISpec 5L第44版的最新进展和变化。     

Internal short circuit in Li-ion cells

Effects of internal short circuit (ISCr) on thermal stability of Li-ion cells of various sizes (130-1100 mAh) are investigated using a combination of experimental methods and thermal modeling. Three experimental methods were evaluated: small nail penetration, small indentation, and cell pinch test. The small nail penetration and indentation tests created significant heat sinking to the cell-can or to the nail. Only the cell pinch test provided a reasonable approximation of a high risk ISCr event. ISCr location plays a critical role in the consequences of an ISCr event. ISCr at the edge of the electrode is the worst case because of its limited heat conduction to the cell-can. The effects of cell capacity and state of charge on ISCr are also evaluated through tests and thermal modeling.     

Direct utilization of methanol on impregnated Ni/YSZ and Ni-Zr0.35Ce0.65O2/YSZ anodes for solid oxide fuel cells

Some of the limits on fuel cell development include the issues of hydrogen availability and storage. Methanol has many advantages as an alternative fuel for fuel cells but depending on the anode composition, the formation of carbon may be a problem. In this paper, the direct utilization of methanol in solid oxide fuel cells with impregnated Ni/YSZ and Ni-Zr_0.35Ce_0.65O_2−δ (ZDC)/YSZ anodes was investigated at 1073 K. Performance and stability of these anodes, as measured by steady-state polarization and electrochemical impedance spectroscopy, were improved by the presence of ZDC; although, the deposition of carbon, as detected by scanning electron microscopy and temperature-programmed oxidation analysis, was not entirely avoided. The impact of the carbon, however, was different depending on the anode. That is, carbon formation caused the delamination of impregnated Ni/YSZ anodes, while the structural integrity of Ni-ZDC/YSZ anodes was maintained and the cell performance was not negatively impacted. Increasing the fuel utilization decreased coking, as predicted by equilibrium calculations.     

Optimal interval of periodic polarity reversal under automated control for maximizing hydrogen production in microbial electrolysis cells

Microbial electrolysis cells (MECs) are a promising approach for producing hydrogen gas from low-grade substrates with low energy consumption. However, pH increase in a cathode due to proton reduction and thus the need for buffering this pH increase remains a challenge for MEC operation. In this study, a previously reported operational strategy for pH buffer - periodic polarity reversal (PPR) was further studied by developing and applying an automatically control system. The effect of PPR interval on the hydrogen production was investigated and the optimal PPR interval was determined. With an optimal PPR interval of 40 min, the MEC had a significantly low pH increase rate of 0.0085 min^?1 in its cathodes, and this resulted in the highest current density of 1.58 ± 0.02 A m^?2, Coulombic efficiency of 130.3 ± 1.8%, hydrogen production rate of 1.65 ± 0.01 m³ H₂ m^?3d^?1, overall hydrogen recovery of 75.9 ± 0.4%, and energy efficiency relative to the substrate input of 140.8 ± 1.4%. Further analysis suggested that this optimal value of PPR interval was affected by both reaction time and hydrogen supply. When the PPR interval increased from 10 min to 40 min, a longer reaction time helped produce more protons and thus generated a stronger buffer capacity. Beyond 40 min, the mass transfer of the dissolved hydrogen gas could become a limiting factor, leading to a weaker buffer capacity with a longer PPR interval. Those findings have provided an effective pH control strategy with a convenient control system for maximizing hydrogen production in MECs.     

Mechanical properties of proton-conducting sulfonated aromatic polymer membranes: Stress-strain tests and dynamical analysis

The mechanical properties of sulfonated aromatic polymers (SAPs: SPEEK and SPPSU) are studied by tensile stress-strain tests and dynamic mechanical analysis (DMA). The elastic moduli are generally above 1 GPa with tensile strength between 25 and 80 MPa and elongation at rupture between 7 and 50%. These properties are consistent with polymers below their glass transition temperature. The glass transition and elastic moduli are strongly increased by thermal treatments of the SAP membranes, due to formation of cross-links between macromolecules. The cross-linking is observed “in situ” during DMA experiments on thermally untreated SPPSU. These data show that previously neglected SAPs might become very interesting PEM fuel cell membranes, if previously thermally treated.     

Spray formation of middle distillates for autothermal reforming

The reforming of diesel and diesel-like fuels plays a central role in the development of fuel cell systems for on-board power supplies. The vaporization of the fuel via a spray formation and the subsequent mixture with water vapor and air determine the quality of the reforming process, as is shown in this paper. By using a high quality nozzle residual hydrocarbons were below 25 ppmV during the reforming of standard diesel. Through the use of a fuel injector in pulsed operation, the load range was able to be increased from 1:1.67 to 1:6. Spray pattern analyses were conducted using a high-speed camera. The formation of the spray pattern lasted 1.5–2 ms. The testing of a fast-closing magnetic valve manufactured by GSR Ventiltechnik was carried out on the autothermal reformer (ATR) type AH2. It exist not any direct influence of the pulsed operation on hydrogen production.     

Role of dual SiOx: H based buffer at the p/i interface on the performance of single junction microcrystalline solar cells

In p-i-n structure a-Si solar cell a buffer layer with proper characteristics plays important role in improving the p/i interface of the cell, reducing mismatch of band gaps and number of recombination centres. However for p-i-n structure microcrystalline ( µc-Si: H) cell which has much less light induced degradation than a-Si:H cell, not much work has been done on development of proper buffer layer and its application to µc-Si:H cell. In this paper we have reported the development of two intrinsic oxide based microcrystalline layer having different characteristics for use as buffer layers at the p/i interface of µc-Si:H cell. Previously SiO_x:H buffer layer has been used at the p/i interface which showed positive effects. To explore the possibility of improving the performance of p-i-n structure µc-Si:H cell further we have thought it interesting to use two buffer layers with different characteristics at the p/i interface. The two buffer layers have been characterized in detail and applied at the p/i interface of the µc-Si:H cell with positive effects on all the PV parameters mainly improves the open circuit voltage (V_oc) and enhances short circuit current (I_sc). The maximum initial efficiency obtained is 8.97% with dual buffer which is 6.7% higher than that obtained by using conventional single buffer layer at the p/i interface. Stabilized efficiency of the cell with dual buffer is found to be ~9.5% higher than that with single buffer after 600 h of light soakings.     

决策滤波器在数据处理中的应用

判别或消除偶然误差是仪器数据处理的第一步.为了消除突变性扰动或失码等尖脉冲干扰,介绍了一种基于L×MAD准则的非线性滤波法(决策滤波器),实现对奇异数据的实时判别,并用采集数据序列的中值代替奇异数据,实现对奇异数据的实时处理.这种决策数字滤波器具有极强的灵活性和实用性,目前已广泛应用于智能仪器的基本数据处理中.     

Lycium barbarum polysaccharide inhibits the proliferation of HeLa cells by inducing apoptosis

BACKGROUND: Lycium barbarum polysaccharide (LBP), isolated with boiling water from the famous Chinese medicinal herb Lycium barbarum fruits, is one of the most important functional constituents in Lycium barbarum. In this study the effects of LBP on cell proliferation, cell cycle and apoptosis in human cervical carcinoma cells (HeLa cells) were investigated. RESULTS: LBP could inhibit the proliferation of HeLa cells by changing cell cycle distribution and inducing apoptosis. In addition, the loss of mitochondrial transmembrane potential (Δψ_m) was observed by flow cytometry and the increase of intracellular Ca²⁺ concentration was detected by laser scanning confocal microscope in apoptotic cells. At the same time, the nitric oxide content, nitric oxide synthase and inducible nitric oxide synthase activities were also increased. CONCLUSION: The inhibitory effect of LBP on the proliferation of HeLa cells was caused by inducing apoptosis through the mitochondrial pathway. The results showed that LBP can be developed as a potential chemotherapeutic agent candidate against human cervical cancer. Copyright © 2012 Society of Chemical Industry