Trans-10 18:1 in ruminant meats: A review

Trans (t) fatty acids (TFA) from partially hydrogenated vegetable oils (i.e., industrial trans) have been phased out of foods in many countries due to their promotion of cardiovascular disease. This leaves ruminant-derived foods as the main source of TFA. Unlike industrial TFA where catalytic hydrogenation yields a broad distribution of isomers, ruminant TFA are enzymatically derived and can result in enrichment of specific isomers. Comparisons between industrial and ruminant TFA have often exonerated ruminant TFA due to their lack or at times positive effects on health. At extremes, however, ruminant-sourced foods can have either high levels of t10- or t11-18:1, and when considering enriched sources, t10-18:1 has properties similar to industrial TFA, whereas t11-18:1 can be converted to an isomer of conjugated linoleic acid (cis(c)9,t11-conjugated linoleic acid), both of which have potential positive health effects. Increased t10-18:1 in meat-producing ruminants has not been associated with negative effects on live animal production or meat quality. As such, reducing t10-18:1 has not been of immediate concern to ruminant meat producers, as there have been no economic consequences for its enrichment; nevertheless at high levels, it can compromise the nutritional quality of beef and lamb. In anticipation that regulations regarding TFA may focus more on t10-18:1 in beef and lamb, the present review will cover its production, analysis, biological effects, strategies for manipulation, and regulatory policy.     

新型永磁同步屏蔽电机设计研究

针对高温、高压液体环境的运行需求,提出一种新型耐高温永磁同步屏蔽电机,分析了电机的结构,建立了电机的磁路分析模型和电感参数分析模型。分析了电机的损耗,给出了电机的性能计算方法。通过对样机的性能试验,测量的结果与计算结果基本一致,验证了方法的正确性。     

机械合金化PM304粉末的烧结特性

采用高能球磨方法制备了PM304复合粉末。研究了纳米PM304粉末的真空烧结致密化和显微组织演化现象，并与未球磨粉末的烧结试样进行了比较。结果表明，提高烧结温度和延长烧结时间有利于提高相对密度，同时组织长大。1100℃，2h是最佳烧结工艺。机械合金化导致粉末纳米化，使真空烧结后的显微组织结构明显细化，使试样的相对密度和抗拉强度比未球磨粉末烧结后的试样有显著提高。     

Effects of ZrO2 on the structure and magnetic properties of CoPt thin films

[CoPt 1.5 ml/ZrO2 xnm]10 multilayer films were deposited on glass substrates by magnetron sputtering and then annealed in vacuum at 600℃ for 30 min. Their structures and magnetic properties were investigated as a function of ZrO2 content. The results show that the grain size and coercivity first increase and then decrease with the increase in ZrO2 content. The maximum coercivity and grain size are obtained at 37 vol.% of ZrO2. The content of ZrO2 in the film plays an important role in the separation of CoPt grains and in the reduction of intergrain exchange interaction. On the basis of the studies of angular dependent coercivity, it is found that the magnetization reversal of CoPt films with （111 ） texture is different from either the domain wall motion or the S-W type of rotation mode.     

Creep behavior and microstructure evolution of directionally solidified superalloy IC 10 at high temperature

The creep behavior of directionally solidified （DS） superalloy IC 10 was investigated under 192 MPa and 218 MPa at 980 ℃. Under the testing conditions, the marked creep characteristic of the superalloy is that the creep curve has a short primary and secondary stage and a long tertiary stage. Another creep characteristic is that the superalloy has excellent plasticity at high temperature. To study the creep behavior, the microstructure was observed by SEM and TEM. Different from other microstructure of Ni-base superalloys, superalloy IC10 forms incompletely rafted γ＇ phase during the creep processes. To understand the creep deformation mechanism of superalloy IC10, the movement of dislocations was analyzed. The results show that the dislocations moving in the γ matrix and climbing over the γ＇ precipitates is the main deformation mechanism under the experimental conditions.     

Crystallization kinetics of amorphous Zr65Cu25Al10 alloy

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｇｌａｓｓｆｏｒｍｉｎｇ ｍｕｌｔｉｃｏｍｐｏ ｎｅｎｔａｌｌｏｙｓｙｓｔｅｍｓｗｉｔｈｖｅｒｙｌｏｗｃｒｉｔｉｃａｌｃｏｏｌｉｎｇｒａｔｅｓｗｉｔｈｉｎ 1～ 10 0Ｋ/ｓｈａｓｏｆｆｅｒｅｄｆｉｒｓｔ     

Synthesis and characterization of LiNi0.45Co0.10Mn0.45O2 cathode for lithium ion batteries

1INTRODUCTIONAdvanced rechargeable lithium ion batteriesare attractive for use in consumer electronic andelectric vehicle(EV)application because of a fa-vorable combination of voltage,energy density,cycling performance,and have been developed rap-idly worldwide during the past decade[1,2].LiCoO2has been widely used as a cathode material in com-mercial lithiumion battery because it is reasonableeasy to synthesize and shows a stable discharge ca-pacity[3].But due to its high cost and toxic…     

Zr65Al7.5Ni10Cu17.5和Zr65Al10Ni10Cu15合金的非晶和晶态薄带吸氢行为研究

研究两种不同成分具有较大过冷液相区的四元合金Zr65Al7.5Ni10Cu17.5和Zr65Al10Ni10Cu15，非晶和晶态薄带吸氢行为，结果表qt两种薄带的吸氢量均随着温度的升高而增大，非晶薄带的吸氢量要小于同等条件下的晶态薄带的吸氢量且只有在673K吸氢后形成了氢化物，Zr65Al7.5Ni10Cu17.5非晶和晶态薄带吸氢后分别生成了Zr2NiH4.7和ZrH2；而Zr65Al10Ni10Cu15非晶和晶态两种薄带最后生成的氢化物同为ZrH2。     

光通信用10 Gbit/s激光器模块及关键技术

由于芯片封装成器件后频率响应会降低,介绍了10 Gbit/s系统用的激光器和探测器的封装技术来封装芯片.通过研究发现,通过金丝电感可以补偿芯片和热沉的寄生电容,从而使封装后的器件频率响应有所改善.利用此封装技术,实现了3 dB调制带宽为10.5 GHz的TO封装激光器.并在此基础上,研发了10 Gbit/s Transponder,且此10 Gbit/s Transponder的测试性能完全满足MSA和ITU-T规范,符合应用要求.