金属掺杂中孔分子筛的合成及其研究

以十二烷二胺(DADD)为模板剂,TEOS为硅源,通过水热合成法制备出了具有高金属含量的中孔分子筛Zr-MSU-V和Nd-MSU-V,采用XRD、TG-DTA和TEM等对合成的分子筛进行了表征.XRD结果表明,即使当Si/Zr或Si/Nd的摩尔比达到5或20时,获得的两种分子筛Zr-MSU-V和Nd-MSU-V均能保持良好的结晶度,TEM图清楚地展示了Zr-MSU-V具有有序的层状结构;TG-DTA的结果显示,903 K焙烧脱除模板剂不会破坏金属嵌入分子筛的结构,说明其具有良好的热稳定性;通过48 h水热处理后的分子筛仍保持其结构有序性,说明其具有优良的水热稳定性.     

多孔无机材料的性质及用途

对各种多孔无机材料的制备工艺原理和性质进行了论述，并分析了影响多孔无机材料孔径的因素，介绍了多孔无机材料在国民经济生产中的各种用途，指出了以往研究发展中存在的问题。     

纳米Al2O3粉体材料激光烧结成型基础试验研究

基于激光烧结快速成型技术 ,利用CO2 激光对纳米Al2 O3 粉体材料进行激光烧结成型的试验并用扫描电镜(SEM)和X射线衍射仪等对烧结样品进行分析。结果表明 ,在适当的工艺参数下 ,对Al2 O3 粉体的激光烧结可获得一定形状的、致密的陶瓷块体 ,块体内部晶粒保持在纳米尺度     

CNTs/Polyester复合材料的微波吸收特性研究

研究了添加不同质量分数CNTs的聚酯基复合材料的电磁波吸收性能,初步分析了CNTs的螺旋结构和手征性质导致8～40GHz波段良好的吸收。其中厚度为1.40mm±0.05mm的CNTs/Polyester复合材料在25GHz有较强的吸收峰。     

Modeling of Material Deformation Kinetics in the Prefracture Zone

Based on the concept of complete stress–strain diagrams, we propose a new model describing the law of stress distribution in the prefracture zone in plastic materials in view of the type of the stressed state.     

Tuning the Dimensions of C60‐Based Needlelike Crystals in Blended Thin Films

A new ordered structure of the C₆₀ derivative PCBM ([6‐6]‐phenyl C₆₁‐butyric acid methyl ester) is obtained in thin films based on the blend PCBM:regioregular P3HT (poly(3‐hexylthiophene)). Rapid formation of needlelike crystalline PCBM structures of a few micrometers up to 100 μm in size is demonstrated by submitting the blended thin films to an appropriate thermal treatment. These structures can grow out to a 2D network of PCBM needles and, in specific cases, to spectacular PCBM fans. Key parameters to tune the dimensions and spatial distribution of the PCBM needles are blend ratio and annealing conditions. The as‐obtained blended films and crystals are probed using atomic force microscopy, transmission electron microscopy, selected area electron diffraction, optical microscopy, and confocal fluorescence microscopy. Based on the analytical results, the growth mechanism of the PCBM structures within the film is described in terms of diffusion of PCBM towards the PCBM crystals, leaving highly crystalline P3HT behind in the surrounding matrix.     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

Synthesis and luminescence of Sr2CeO4 fine particles

Fine particles of a blue emission phosphor Sr₂CeO₄ have been synthesized using a chemical co-precipitation technique, and the textual and luminescent properties were compared with the one synthesized by the conventional solid-state reaction method. Particle size and distribution of the Sr₂CeO₄ fine powder prepared by the co-precipitation process were smaller and narrower than those obtained by the samples prepared from the conventional one. The emission intensity of the fine particles was equal to that of the larger particles prepared from the solid-state reaction, on the contrary to the general tendency that emission intensity decrease with particle size reduction. Although no Ce³⁺ peaks were observed in EPR measurements, X-ray photoelectron spectra of the samples clearly elucidated the existence of Ce³⁺ only on the surface of Sr₂CeO₄.     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

Time-resolved spectroscopy of infrared active vibrations in 2,5-dioctyloxy poly(phenylene vinylene) films

We report on picosecond time resolved spectroscopy of photogenerated infrared active vibrations in thin films of 2,5-dioctyloxy poly(phenylene vinylene). We excited the films by ?4 ps long pulses of 565 nm laser light with 2×10¹³ photons/cm² per pulse and repetition rate of 76 MHz. We then followed the temporal evolution of the infrared active vibrational (IRAV) spectrum using a subsequent, variably delayed, weak tunable IR probe pulses of similar temporal duration. Under these conditions, we show clear spectroscopic evidence for photogenerated infrared active vibrations at times which are shorter than our temporal resolution (<4 ps). We suggest that the transient IRAV absorption is due to secondary polarons formation following exciton dissociation.