传统机械加工表面形貌评定的缺陷及发展方向

本文通过对传统机械加工表面形貌评定体系的分析，指出其不能完整地、从本质上反映表面的特征。并提出轮廓长度率、表面真面积率、表面分形维数D、比例系数K四个评定参数，通过分析可以看出这组参数比传统方法所具有的优越性和代替传统方法的可能性。     

Kevlar－49芳纶纤维表面接枝改性

采用空气等离子体处理Ｋｅｖｌａｒ－４９并在活化处理后的纤维表面接枝聚丙烯酸（ＰＡＡ）、聚丙烯酸乙酯（ＰＥＡ）及丙烯酸和丙烯酸乙酯的共聚物（ＰＡＡ／ＥＡ）。单丝拔出实验研究表明，空气等离子体改性的Ｋｅｖｌａｒ－４９／环氧树脂体系的界面结合强度和界面破坏能均有明显提高，其中接枝了Ｐ（ＡＡ／ＥＡ）的Ｋｅｖｌａｒ－４９／环氧树脂体系的界面破坏能（５５Ｊ／ｍ２）比未改性体系的界面破坏能（２７．８Ｊ／ｍ２）提高了一倍。     

国际微电子专用关键设备的现状和发展趋势（考察报告）

讲述了参观Ｓｅｍｉｃｏｎ／ｗｅｓｔ９４′展览会及考察美国和西德的５个公司、１所大学所了解到的投影光刻技术、电子束曝光技术、透镜面形测试技术的发展。     

Surface Chemistry and Catalysis of Rare Earth Oxides I．A Study of the Reactivity of Surface Hydroxyls on CeO_2 and Pr_6O_（11） by FT－IR Spectroscopy

ＳｕｒｆａｃｅＣｈｅｍｉｓｔｒｙａｎｄＣａｔａｌｙｓｉｓｏｆＲａｒｅＥａｒｔｈＯｘｉｄｅｓＩ．Ａ　ＳｔｕｄｙｏｆｔｈｅＲｅａｃｔｉｖｉｔｙｏｆＳｕｒｆａｃｅＨｙｄｒｏｘｙｌｓｏｎＣｅＯ_２ａｎｄＰｒ_６Ｏ_（１１）ｂｙＦＴ－ＩＲＳｐｅｃｔｒｏｓｃｏｐｙ...     

非反应性共聚物增容剂的作用

简述了共聚物增容剂在聚合物熔融共混物中的作用方面的研究进展。阐述了A-B、A-C和D-E型非反应性共聚物增容剂。重点介绍了增容剂的分子量、用量对聚合物共混物的界面张力、相畴尺寸和聚结的影响。     

A dynamic integration algorithm to model surfaces from multiple range views

This paper presents a dynamic integration algorithm to triangulate a surface from multiple range views. This integration technique is based on the reparameterization of the canonic subsets of the Venn diagram of the set of range views. We compute a model based onN views from a model based onN–1 views by processing only the surface segments visible in theN ^th view. An experimental result shows that the proposed integration algorithm can process complex multipart objects containing holes.     

Application of Rachinger''s method to separate overlapped doublets in the X-ray photoelectron spectrum

Rachinger's method of separating ₁ and ₂ doublets in X-ray emission spectra is applied for the first time to separate the superimposed doublets due to spin-orbit coupling. This method has been applied to separate closely lying doublets such as (Ag 4p_3/2and Ag 4p_1/2, (Ni 3p_3/2and Ni 3p_1/2) and (Cu 3p_3/2and Cu 3p_1/2). The intensities ratios of the separated peaks are measured and compared with the ratios obtained from a first-order calculation. An excellent agreement between the measured and calculated ratios are obtained. Residual background intensities compared with the estimated values are found to agree within certain uncertainties.     

SURFACE TENSION AND BUOYANCY DRIVEN INSTABILITIES IN A LAYER OF LIQUID TIN HEATED FROM BELOW

The linear theory of Pearson (1958) and Nield (1964) is modified here to study liquid tin and include the finite thermal resistances of the bounding layers of boron nitride, copper and air (∼10^-2 torr) in the experiments of Ginde et al. (1989). The magnitude of the ΔT_c across the layer of liquid tin required for the onset of convection depends on the ratios of the thermal conductivities and thicknesses of the supporting layers of boron nitride and copper to those of the tin.

According to our theory surface tension contributes more than buoyancy to the instability observed experimentally. The critical ΔT_c observed required for the onset of convection in the layer of tin, is up to 25% lower than that predicted, which shows the layer is less stable than the theory indicates. Thus the surface of the tin was uncontaminated, or a significantly larger observed critical ΔT_c would be expected.

The boundary condition on the thermal fluctuations at the base of the supporting layer of copper does not appear to be important in these experiments. However, the thermal resistance of the boron nitride would have to be assumed to be unrealistically large to obtain agreement within experimental error with the theory.     

Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

A Cost-Effective Thickness Measurement Technique for Engine Propellers

This paper describes the design and development of a precision calliper system to measure the surface profile of an outboard marine engine propeller blade. Several instruments that are commonly used for measuring the surface profile of a propeller blade are reviewed in this paper. These include the pitch meter, the profilometer and the computer numerical control coordinate-measuring machine (CNC-CMM). However, the operating practices and availability of different facilities in industry necessitate a more cost-effective approach. An alternative method using a precision calliper system is therefore proposed. Details of the design criteria, principles of operation and the testing and verification of the system are presented. The paper concludes that the precision calliper system is a cost-effective method for measuring the surface profile of a propeller.