铝液析氢界面反应过程动力学研究

建立了铝液中氢的界面反应过程的数学物理模型，对界面反应过程进行了动力学推导和计算。利用铝液直接测氢装置对氢的界面反应动力学过程进行了测试。计算结果与测试结果基本吻合。     

砼受压损伤力学本构模型的研究

本文利用ＭＴＳ公司８１５．０２型电液伺服试验系统对砼进行了等应变速率加载控制的应力一应变全曲线试验，应用不可逆热力学和内变量理论的成果建立了砼损伤力学模型，并用概率统计的观点分析了损伤的演化规律。由于考虑了不可逆变形的影响，本文所建本构模型与实验吻合较好。     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces. III. Investigation of Possible Physico-Chemical Interactions at the Interphase

Surface free energies of polyurethanes made from toluene diisocyanate and 1, 4 butanediol-based hard segments and caprolactone polyol-based soft segments were calculated using additive functions. Good agreement was found between the calculated values based on additive functions and the calculated values based on contact angle measurements. The phase-separated polyurethanes were found to have a higher polar surface free energy component (γ^P). This was linked to the preferential segregation of butanediol/butanediol-derived moieties to the polyurethane surfaces due to phase separation. The adhesion values of these polyurethanes to soda-lime glass were correlated with their respective γ^P values and a linear relationship was found. It was also shown that the adhesion values of the low γ^P polyurethanes improved substantially when the glass surfaces were coated with a thin layer of butanediol prior to the bonding. The modulus of the interphase region rich in butanediol was evaluated. Although a modulus increase was found at the interface, this increase was found to play a secondary role in the adhesion. The chemical interactions at the polyurethane/glass interphase were investigated by pre-treating the glass surfaces with methyl-trimethoxysilane and trimethylchlorosilane prior to adhesion testing. The adhesion data showed no significant difference between the uncoated and the silane-treated glass substrates. Based on this experimental evidence, the possibility of any covalent or ionic bonding at the polyurethane/glass interphase was assumed negligible. It was determined that the mechanism of adhesion between the polyurethanes and the glass surface could be through the formation of an interphase region in which hydrogen bonding between the butanediol-rich interphase region and the hydroxylated glass surface plays a key role.     

Homology modelling of annexin I: implicit solvation improves side-chain prediction and combination of evaluation criteria allows recognition of different types of conformational error

Annexin I homology models were built from the annexin V crystalstructure. Three methods for side-chain prediction were testedbased on molecular mechanics conformational search, the useof a rotamer database, or a combination of these two methods.We showed that rotamer-based methods were more efficient andthat molecular mechanics energy minimizations, prior to rotamerselection, did not afford clearly improved predictions. Modelsbuilt in vacuo and with an implicit solvation term were comparedwith the annexin I crystal structure which became availableduring the course of this study. The analysis of solvation energies,root mean square deviations, Xi angles and hydrogen bonds showedthat models built with implicit solvation were of better quality.In annexin V, repeat III displays A-B and D-E loop conformationsquite different from other repeats. Since the sequence differencessuggest that repeat III in annexin I might present a conformationsimilar to other repeats, two annexin I models with differentrepeat III conformations were built and compared to determinewhether the correct conformation could have been predicted.We show that using a combination of evaluation criteria, itis possible to discriminate unequivocally between the nativeand the incorrect fold, stressing that only one criterion shouldnot be used to evaluate protein structures.     

不同预处理方法对稻秸纤维表面性质的影响

通过对稻秸原料进行水热、酸碱和冷等离子体预处理,分析了纤维表面的浸润性及表面自由基浓度的变化。研究表明,经水热及酸碱预处理后,纤维与水的接触角为90o,稻秸纤维的浸润性改善不明显,经冷等离子改性后,稻秸纤维表面浸润性改善非常明显。水热及乙酸处理有利于提高稻秸纤维的表面自由基浓度,碱处理则降低了稻秸纤维的表面自由基浓度。     

炼厂碱渣处理工艺及设计优化

针对催化裂化装置汽油和液态烃精制产生的含硫废弃物的碱渣处理，讨论了碱渣提酚、碱渣湿式氧化脱臭两种处理工艺的环境治理效果，并就碱渣湿式氧化脱臭工艺如何降低运行成本、减少污水排放等内容进行了探讨。     

Energetics of Plastic Deformation of Metastable Austenitic Stainless Steel

The change in the internal energy during uniaxial tensile deformation of austenitic stainless steels EN 1.4301 (AISI 304) and EN 1.4318 (AISI 301LN) was determined by measuring the extent of γ→α'‐martensite transformation and the temperature increase of the samples. From the results the fraction of the stored energy of cold work and the free energy change related to the strain‐induced γ→α'‐martensite transformation were determined. The fraction of stored energy varied around 0.4. With the metastable steel grades the free energy change related to the γ→α'‐martensite transformation was found to vary between ‐98 MJ/m³ and ‐206 MJ/m³ depending on the austenite stability of the steel. Furthermore, the magnitude of the mechanical driving force was estimated by comparing the results with the free energy change of thermally induced transformation.     

Viscous behaviour of glass-forming liquids: a thermodynamic approach

The temperature dependence of the viscosity of the undercooled melts exhibits an important role in the study of nucleation, crystal growth and the glass-forming ability of materials. Several attempts have been made to study the viscous behaviour of the glass-forming melts and these investigations are mainly based on free volume theory as well as on the configurational entropy model. In the present investigation, an attempt has been made to correlate the thermodynamic parameters with the viscosity of the glass-forming melts and to study the temperature dependence of the viscosity of undercooled liquids on the basis of the free volume theory as well as on the basis of the configurational entropy model of Adam and Gibbs. The entire study is confined on the expression for thermodynamic parameters reported by the authors recently. The expression obtained has been successfully applied to study the temperature dependence of the viscosity of the metallic, molecular and oxide glass-forming liquids.     

自由电子激光光导效应数值研究

本文对喇曼型自由电子激光光导效应进行了理论研究和数值模拟。我们编写了轴对称的二维计算机程序(FELOG),用来研究无波导和有波导情况下的光导效应。对光场分布、光场半径、填充因子及等效折射率等进行了模拟。根据实验参数进行的模拟结果与实验结果进行比较,它们符合很好。并对影响光导效应的因素进行了分析。     

镀锌层上有机物无铬钝化涂层的耐蚀性

选择了一种无毒的水溶性丙烯酸树脂（AC）加入至钼酸盐、磷酸盐中（M）得到一种钝化液（ACM），对镀锌层进行钝化处理以代替有毒的铬酸盐钝化。通过盐雾试验、扫描电镜、电化学测试等手段，研究了该纯化膜的耐蚀性及耐蚀机理。结果表明，热浸镀锌层采用该无毒钝化液进行钝化，可以推迟镀锌层出现白锈的时间，其抗蚀性已接近铬酸盐钝化水平；ACM钝化膜耐蚀性的提高是由于钝化膜中的钼酸盐与丙烯酸树脂产生交联作用，抑制钝化膜裂纹的扩展，同时由于膜层中钼酸盐的缓蚀作用，提高了镀锌层的抗蚀性。