大孔吸附树脂纯化石榴皮多酚

从D3520、D4020、AB-8、D140、D141、D160、DM-301、DA-201、SAD-7和D101大孔吸附树脂中筛选出D141树脂,研究了其对石榴皮多酚的静态与动态吸附和解吸性能。结果表明,D141树脂对石榴皮多酚的饱和吸附量为19.86 mg/g(干树脂),吸附等温线符合Langmuir方程,饱和吸附时间为5 h,适宜解吸剂为体积分数70%的乙醇溶液;以质量浓度9 mg/mL的石榴皮提取液上柱,流速为1.8~2.0 BV/h时,树脂的多酚穿透吸附容量为39.42 mg/g(干树脂),2.5 BV体积分数70%的乙醇溶液可将吸附于柱上的石榴皮多酚完全洗脱。以该条件纯化石榴皮多酚提取物时,纯化样的收率为15.4 g/100 g(石榴皮),多酚质量分数从34%提高到76.34%。     

Peel Adhesion of Poly(Vinyl Chloride) to Nitrile Rubbers

In addition to molecular interaction and physical entanglement of the molecular chains across the interface in poly (vinyl chloride)-nitrile rubber joints, at high temperatures and long contact times interfacial chemical bonds may be formed which seem to couple the two adherends thereby resulting in cohesive failure of the rubber matrix on peeling. This is verified by performing the peel tests at high temperatures, low peel rates and under swollen conditions. Infrared spectroscopic studies of the PVC/NBR blend reveal the formation of chemical bonds at the contact temperatures studied. The peel fracture energy is found to depend on the acrylonitrile content and presence of carboxylic content in the NBR, and the presence of stabilizer and plasticizer in the PVC phase, in addition to the molding and testing conditions.     

Interlayer delamination and adhesion of coextruded films

Efforts to evaluate interlayer adhesion of coextruded films are often hampered by the inability to initiate delamination. On the other hand, interlayer delamination was often noticed at cut or trimmed edges of coextruded films. In this study, a test method was developed by first initiating delamination by uniaxial stretching and then measuring interlayer adhesion by peel test. Delamination was initiated by uniaxial stretching under controlled conditions for samples with double‐neck geometry. The double‐neck geometry was designed to create a specimen for the subsequent 180° peel test. Peel force was used to quantify interlayer adhesion of coextruded films based on polycarbonate and its copolymers. With this two‐step technique, coextruded films with peel force as high as 5300 N/m or 30 lb./in. were quantified. In addition, effects of copolymer composition and coextrusion processing condition on interlayer adhesion of these coextruded films were clearly demonstrated. A great deal of variation of interlayer adhesion across film surface was also revealed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3901–3909, 2004     

Sulfur Versus Non-Sulfur Containing Polyimide Adhesives for Bonding Steel

Due to their superior thermal and chemical stability, polyimides are often used as adhesives in harsh environments. This study examines the effect on bond strength of thioether sulfur in the polyimide backbone. Bonds were made using steel that was believed to catalyze the oxidation of sulfur. In addition, non-sulfur containing polyimides with similar T_g were also studied for comparison. The polymer/metal interface was studied using both the T-peel and wedge tests. No apparent effect was observed in the T-peel test with steel where the T-peel strengths of non-sulfur and sulfur containing polyimides were similar. In the wedge test, however, the sulfur-containing BDSDA/ODA bonded to steel had the smallest initial crack length of 34 mm. However, the BTDA/APB bonds tested in a dry environment had the smallest crack growth. The sulfur-containing BTDA/ASD performed best of the bonds tested in a wet environment. Metal-catalyzed oxidation of sulfur was observed to take place in the steel case, but not to an extent to have a noticeable effect on peel strength.     

PSA performances and viscoelastic properties of SIS‐based PSA blends with H‐DCPD tackifiers

Hotmelt pressure sensitive adhesives (PSAs) usually contain styrenic block copolymers like styrene–isoprene–styrene (SIS), SBS, SEBS, tackifier, oil, and additives. These block copolymers individually reveal no tack. Therefore, a tackifier is a low molecular weight material with high glass transition temperature (T_g), and imparts the tacky property to PSA. The SIS block copolymer with different diblocks was blended with hydrogenated dicyclopentadiene (H‐DCPD tackifier), which has three kinds of T_g. PSA performance was evaluated by probe tack, peel strength, and shear adhesion failure temperature. PSA is a viscoelastic material, so that its performance is significantly related to the viscoelastic properties of PSAs. We tested the viscoelastic properties by dynamic mechanical analysis and the thermal properties by differential scanning calorimeter to investigate the relation between viscoelastic properties and PSA performance. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 2839–2846, 2006     

On the importance of some surface and interface characteristics in the formation of the properties of adhesive joints

The importance of some relative surface characteristics which determines the strength of adhesive joints: specific surface of substrate , relative contact area β and specific contact area β in the adhesion interaction process were emphasised. Existing and potential methods of experimental evaluation of these characteristics were shortly analysed. The durability of the adhesive joints in water media significantly increases with growth of specific surface ^* of chemically treated substrate evaluated from the SEM micrographs. Specific surface calculated from the experimental data of hexane adsorption measurements for iron particles (particulate model of steel substrate) is more then ten times greater than respective ^* values. The relative contact area β of the Al₂O₃ particles (in wide range of ) with PE melt was in a roundabout way evaluated by experimental determination of the affect of on kinetic of peel strength formation of adhesive joints: Al₂O₃ filled PE-steel. The speculation was based on the ability of Al₂O₃ to adsorb low-molecular products of contact oxidation of PE which takes place in the process of formation of adhesive joints and determines their strength. The ability of sorption in its turn is proportional to efficient value of β. The availability of the Al₂O₃ surface was evaluated.     

Identification and fermentation optimization of protopectinase-overproducing strain Aspergillus niger CD-01 for pectin production

In order to solve the citrus peel resource waste problem and minimize the drawbacks of chemical extraction of pectin, a protopectinase-overproducing strain CD-01 for pectin production was isolated from a pit soil dumped with perished orange in Changde City, Hunan Province of China. The strain CD-01 had the same morphology and 28S rRNA gene sequence (FJ184995) as that of Aspergillus niger (ATCC 64028). It was thus identified and named as Aspergillus niger CD-01. The fermentation condition was optimized based on L₉(3⁴) orthogonal experimental design and the variances analyses. The results show that the optimal condition for producing pectin is as follows: time 36 h, temperature 35 °C, pH 5, and urea as the nitrogen source. Under this condition, the pectin yield can reach up to 24.5%. This shows a great potential of Aspergillus niger CD-01 in pectin extraction from citrus. Foundation item: Projects(50621063, 50674101) supported by the National Natural Science Foundation of China     

微波辅助提取柑橘皮中的挥发油

采用微波辅助提取柑橘皮中挥发油,其最佳提取条件为：30g柑橘皮粉末浸在60mL无水乙醇中,微波功率为300W,微波辐射时间为150s。采用溴加成法对挥发油进行定量分析,经测定挥发油的含量为2．77％。实验表明．微波法具有提取率较高、时间短、成本低和污染少等优点。     

微波辐射提取桔皮中橙皮苷的研究

以乙醇溶液为提取溶剂,采用微波辐射提取桔皮中的橙皮苷,考察了溶剂浓度、微波功率、微波辐射时间、液料比等因素对橙皮苷提取量的影响.正交试验优化显示：溶剂体积浓度55%、微波提取功率400 W、辐射时间70 s和液料之比15∶1（质量比）时,橙皮苷的提取率为41.05%,比无微波辐射提取提高了14.21%.