气相处理对碳纤维表面及其复合材料性能的影响

本文对气相表面处理碳纤维的新工艺进行了系统研究。处理后的碳纤维强度、模量不下降,且其表面能、表面化学官能团含量明显增加;表面微晶结构变小,与环氧树脂复合后,层间剪切强度(LLSS)提高47%左右。本文还对复合材料断口的形态结构进行了分析,说明这种表面处理方法能有效改善碳纤维增强环氧树脂复合材料(CFRP)的界面粘结。     

化学镀SiCp／Ni－P复合镀层与基体结合强度及其影响因素

论述了ＳｉＣｐ／Ｎｉ－Ｐ复合镀层与钢基体的结合强度及其影响因素。复合镀层中离界面５μｍ厚度以内区域的组成及应力状态对镀层／基体的界面结合有决定性作用，在该区域以外ＳｉＣ粒径变化不影响镀层的结合强度。适当的热处理可提高界面结合力。     

Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

统计复用信道的数字用户环路复用设备

将信道传输容量动态分配技术应用于数字用户环路复用设备中，可用效地解决复用设备线路复用率和话音传输质量之间的矛盾，从而使复用设备具有最佳的传输效果。本文介绍了一种性能优良的统计复用信道的数字用户环路复用设备。     

Formation of GaAsP interface layers monitored by reflectance anisotropy spectroscopy

Reflectance anisotropy spectroscopy (RAS) has been used to study As-by-P exchange during metalorganic vapor phase epitaxy. The study focuses on the processes occurring during switching from GaAs to GaInP, especially the effect of purging PH₃ over a GaAs surface. GaAsP/GaAs superlattices of different periodicity were grown and the P-content was determined by high-resolution x-ray diffraction and correlated to the RAS spectra. From the temperature dependence of the P-content, an activation energy of 0.56 eV was estimated for the incorporation mechanism. In addition to the insights into the processes at mixed group-V heterointerfaces, our study demonstrates the reproducibility of RAS transients that thus can be used for process monitoring.     

FDDI及其网络规划设计

从参考模型等方面阐述了FDDI标准，讨论了FDDI的主要组网方式，并以实例阐述了网络的规划设计。     

Local Enrichment of Active Element Y in Y-modified PVD Films on Mild Steel Substrate

By means of EPMA,SIMS and XTEM tech-niques,the element distribution at the transitionzone of Y-modified ion plated titanium andtitanium nitride film on A3 steel substrate and thevariation of the element content on the surface ofthe evaporation source before and after service werestudied in detail.A mode was proposed in terms ofpreferential evaporation and micro-tunnel trans-portation of Y at the interface of film/substrate.     

单片机的显示接口电路设计

介绍了利用单片机的串、并行接口和专用显示接口 IC 设计显示接口电路的方法,并提供了4种动态和静态显示的硬件接口电路。     

On an invariance principle for unilateral contact at a bimaterial elastic interface

This paper examines the axisymmetric elastostatic problem related to the unilateral receding contact at a pre-compressed smooth bimaterial elastic interface. The separation at the interface is caused by the action of axisymmetric stress fields of unequal magnitude, which are applied at any location of the separate halfspace regions. The analysis of the problem focuses on the determination of the zone of separation as a function of the pre-compression, the magnitudes and locations of the axisymmetric stress fields inducing the separation, and the elasticity characteristics of the halfspace regions. It is found that the radius of the separation zone can be evaluated in explicit form. In the particular instance when the loadings applied at the surface of the halfspace regions are equal in magnitude and distribution, the analysis reveals that the radius of the separation zone is independent of the elasticity properties of the halfspace regions and can be evaluated in exact closed form.     

超声检测技术在坝体/基岩结合面测试中的应用

1998年，由加拿大和中国技术人员分别组成的3个小组对加拿大安大略省Otto Holden大坝的坝体混凝土与基岩结合面进行了测试。文中以这次测试研究为背景，系统介绍了测试的目的、使用的检测技术以及取得的成果，着重介绍了超声检测技术在坝体／基岩结合面测试中的应用。