型材弯曲模设计

分析了型材在弯曲后其口型失稳起皱的原因,介绍了在型材槽型中填充胶条后在模具的夹持中弯曲成形的工艺,从根本上解决了型材的失稳和起皱,保证了型材的口型尺寸。     

Aging and mechanical properties of NR/BR blends

The mechanical properties and post-thermal aging properties of natural rubber (NR) and polybutadiene rubber (BR) blends at different blending ratios are investigated herein. The experimental results show that both tensile and tear strengths of NR/BR blends increase with increasing NR content. BR has a higher compression stiffness than NR. The deformation of BR is less than that of NR under the same load conditions. With regard to aging properties, both tensile stress and strain of NR/BR blends decrease after prolonged aging. In addition, the stress loss of BR is lower than that of NR, meaning that the aging resistance property of BR is superior to that of NR. Furthermore, accumulated thermal history has shifted the glass transition temperature (T _g) of NR/BR blends toward lower temperatures while the loss tangent (tan δ) value increases with prolonged thermal aging.     

艺术铸件冷冻冰模制模方法的研究

艺术铸件是艺术创作和铸造技术的完美组合，铸造工艺是艺术思想的重要保证。从古至今，艺术家和铸造工作者进行了不懈的探索。本文通过试验，分析了冷冻铸造方法用于艺术铸造的一些优势，探讨了用硅橡胶模具制作冰模的工艺方法，并将用此工艺成功制作的一些冰模展示出来。     

橡胶密炼机混炼工艺瞬时功率控制法

橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流理论和混炼过程功率曲线与能量控制法不同，瞬时功率控制法实质上是控制混炼过程中胶料的粘度，确保混炼工艺过程保持最佳状态。因而瞬时功能控制法可监控生产过程，为密炼机混炼工艺的智能控制奠定了基础。     

Polynitroalcohols obtained through nitro aldol reaction between nitro oligomers and C1‐C2‐aldehydes

Polynitroalcohols (PNA) were obtained by A_N‐reaction of nitro oligomers from ground waste rubbers (NO‐GWR) with C₁‐C₂‐aldehydes in presence of organic bases triethanolamine, triethylamine and cyclopropylamine. The A_N‐reaction was studied at temperatures from 30 to 50°C, time 4 h, and NO‐GWR : aldehyde = 1 : 0.5/2.0 mass ratios in the solution. PNA were characterized by elemental analyses, such as ¹H NMR spectra, IR spectroscopy—baseline method with internal standard and thermal analyses. The quantitative functional composition of PNA (%NO₂, %C?O, and %OH groups) was proved to be similar to the composition of PNA obtained from model butadiene–styrene nitro oligomer (BSNO). It was concluded that NO‐GWR could replace NO based on elastomers in nitro aldol reaction with formaldehyde and acetaldehyde. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3241–3250, 2006     

CR／MMA乳液接枝共聚物的研制

用乳液接枝共聚法制备ＣＲ／ＭＭＡ共聚物，讨论ＣＲ乳液、引发剂、接枝温度、ＭＭＡ用量对接枝共聚转化率，接枝ＭＭＡ含量、ＭＭＡ接枝效率和粘接性能的影响，用红外光谱对接枝共聚物进行表征，该共聚物具有较好的粘接性能。     

镍系聚丁二烯橡胶生产技术进展

介绍了近几年国内外镍系顺丁橡胶生产技术的进展情况，内容涉及分子量调节技术、催化剂配置技术、节能降耗的气相聚合、本体聚合工艺及橡胶后处理过程中使用的热泵技术、螺杆挤压工艺，同时也对国内外顺丁橡胶新型防老剂的使用情况及其新品种的开发进行了简要介绍。     

超细全硫化胶粉/PA66共混体系的动态力学性能研究

传统的橡胶或热塑性弹性体虽然可以有效改善PA66的韧性,但是所带来的强度、刚度、热变形温度的损失大大影响了材料的实际应用,采用3种新型的超细弹性体———超细全硫化粉末丙烯酸酯橡胶(以下简称UFAPR)、超细全硫化粉末丁腈橡胶(以下简称UFNPR),超细全硫化粉末羧基丁腈橡胶(以下简称UFXPR),增韧增强PA66,对PA66及其共混物的动态力学性能等做了全面的研究,结果表明:胶粉的加入降低了动态损耗模量峰的位置,使其向低温偏移,材料的韧性得以提高;同时损耗峰的强度有一定程度的降低,结晶度提高,从而导致力学性能提高。     

聚丙烯改性技术进展

介绍了近年来聚丙烯改性技术研究方面的进展．研究内容包括用结晶成核剂对聚丙烯的晶型进行设计，用橡胶、矿物填料等对聚丙烯进行改性．     

Effect of ground rubber powder and devulcanizates on the properties of natural rubber compounds

Ground rubber powder (GRP) and devulcanized rubber (Dev.R) waste through a continuous shear‐flow reaction were used as fillers for virgin natural rubber. A Horikx plot and the gel fraction proved that both main‐chain scission and crosslink scission occurred during the devulcanization. The cure characteristics, swelling behavior, crosslink density, and mechanical properties were studied. GRP and Dev.R, generated from passenger car and light truck tires, showed applicable mechanical properties in the new rubber compounds, and the compounds containing Dev.R demonstrated better properties than those containing GRP. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 208–217, 2005