Transparent alumina ceramics: Effect of standard and plasma generated stabilizing approaches in colloidal processing

The study is focused on an optimization of the slip-casting process used for the fabrication of the transparent/translucent alumina ceramics; more precisely, on specifying the most appropriate way to stabilize the cast alumina suspensions. An innovative method of the particles’ stabilization by plasma treatment was compared with the classical electrostatic and the most frequently used electrosteric approach. Properties of green bodies (pore size distribution, density) and sintered samples (density, mean grain size, real in-line transmittance) were measured in term to evaluate the impact of the individual stabilization mechanism on the final properties of the transparent/translucent ceramics. The results showed that all tested approaches enable the preparation of the transparent/translucent alumina ceramics by Hot Isostatic Pressing. Ceramics prepared from the plasma treated as well as the electrostatically stabilized powders exhibited narrower pore size distribution, higher density, and lower mean grain size in comparison to ceramics fabricated from only electrosterically stabilized powders. Despite these promising properties the plasma-treated samples resulted in an unexpectedly low RIT of 36% caused by the presence of thin cracks. However, the electrostatically stabilized samples achieved the highest RIT value of 57%.     

Efficient dispersants for the dispersion of gallium zinc oxide nanopowder in aqueous suspensions

Appropriate dispersants for the dispersion of gallium zinc oxide (GZO) nanopowder in aqueous suspensions were identified in this study. The dispersion efficiencies and stabilization mechanisms of water‐based dispersants ammonium poly(acrylic acid) (PAA–NH₄), an anionic polyelectrolyte, and polyethylenimine (PEI), a cationic polyelectrolyte, were compared. The experimental analyses of rheology and sedimentation showed that both PAA–NH₄ and PEI were good dispersants for the dispersion of GZO. Theoretical calculations based on Derjaguin‐Landau‐Verwey‐Overbeek theory revealed that the stabilization mechanism of PEI was mainly related to the steric effect, and a very low molecular weight of 1800 g/mol was insufficient for powder stabilization. GZO was well dispersed by PEI with high molecular weight of 10 000 g/mol, but agglomeration occurred when too much PEI was added. Compared with PEI, PAA–NH₄ was more efficient because of its high contribution to the increase in electrostatic repulsion. Based on theoretical considerations on both steric and electrostatic effects, namely, the electrosteric stabilization mechanism, PAA–NH₄ is optimal for the dispersion of GZO nanopowder in aqueous suspensions.     

The use of nonylphenol formaldehyde resins for preventing asphaltene precipitation in vacuum residues and hydroprocessed petroleum samples

This work focused on the synthesis and characterization of nonylphenol formaldehyde resins (NPFR) as examples of active molecules for preventing asphaltene precipitation in vacuum residue (VR) and hydroprocessed petroleum samples. The evaluation for the NPFR as asphaltene dispersants was carried out using the on-column filtration technique at room temperature and near process conditions (195°C). The results indicated that NPFR (molecular weight = 900–4800 Da) are active for the reduction of asphaltene content of gravimetrically separated asphaltene solutions and for VR and hydroprocessed samples at room temperature (35°C) and at 195°C. It was found that the activity of NPFR as asphaltene dispersants depends not only on the type of sample (asphaltenes, virgin or processed) but also on the temperature, molecular weight, and concentration.     

Synthesis and Evaluation of Detergent/Dispersant Additives from Polyisobutylene Succinimides

Lube oil additives are essential for all types of lubricating oils; they are added either to give the oils new properties as detergency and oxidation stability or to improve such properties as pour point and viscosity index. They are added at varying proportions to meet the performance requirements. The present work is concerned with studying of detergent/dispersant type additives based on synthesized polyisobutylene succinic anhydride (PIBSA) and its aminated compounds (PIBSA) with different types of polyethylene polyamine such as ethylene diamine, diethylene Triamine, Triethylene tetramine, and tetraethylene pentamine. Different types of polyisobutylene succinimides were reacted with dodecylphenol and formaldehyde to prepare different type of Mannish bases. The efficiency of the prepared compounds as antioxidants and detergents/dispersants was investigated. It was found that compound D₁ (Mannich base IV) is the best antioxidant additive for lube oil, and all the prepared compounds have excellent dispersancy power.     

Study the Influence of Some Polymeric Additives as Viscosity Index Improvers,Pour Point Depressants and Dispersants for Lube Oil

Abstract

In the present work, some polymeric additives were prepared as pour point depressants, viscosity index improvers and dispersant additives for lube oil, these additives prepared by copolymerization of maleic anhydride with different esters of acrylic acids and then amination. The molecular weights of the prepared copolymers were determined by gel permeation chromatograph (GPC). The efficiency of the prepared compounds as pour point depressants and viscosity index improvers was investigated. It was found that the efficiency of the prepared compounds as pour point depressants increases with decreasing the concentration of the prepared polymers, increasing the chain length of alkyl groups and increases with decreasing the molecular weight. The efficiency of the prepared compounds as viscosity index improvers increases by increasing the concentration of these additives and by increasing the molecular weight of polymer. It was found that the amination of polymer enhance the efficiency of the prepared additives as pour point, viscosity index, and dispersant for sludge.     

Group transfer polymerization and its use in water based pigment dispersants and emulsion stabilizers

Group transfer polymerization (GTP) can be used to make AB diblock acrylic polymers. It provides excellent control of the structure of these polymers. With a hydrophilic B block, these polymers have been used to prepare water based emulsions, pigment dispersions, and slurries. These systems have property advantages over emulsions and dispersions made with conventional stabilizers. These advantages include increased stability, smaller particle sizes, lower viscosities, and less moisture sensitivity. The structure of the AB diblock polymer affects the properties of both the pigment dispersion and the emulsion particle. The composition, size and ratio of each block affect the overall quality. For aqueous systems, a balance of hydrophobic ‘A’ blocks and very hydrophilic ‘B’ blocks is needed for optimum properties. The hydrophobic ‘A’ blocks, which are homo or copolymers of methacrylate monomers (such as butyl or ethylhexyl methacrylate), are surface active and can associate with either pigment or emulsion polymer surfaces. The hydrophilic ‘B’ blocks, which are neutralized acid or amine containing copolymers, provide both ionic as well as steric stabilization in water-borne systems.     

聚丙烯酸铵和柠檬酸铵分散剂对钇铝石榴石陶瓷透光率的影响

使用超声波-微波辅助的醇盐水解沉淀法合成了Y_3Al_5O_(12)(YAG)前驱体,加入烧结助剂及分散剂后真空烧结制备了YAG透明陶瓷,并对添加不同分散剂烧成的YAG透明陶瓷的晶相结构、微观形貌及光学性能进行了表征。结果表明:添加不同分散剂均可获得纯相YAG透明陶瓷;添加聚丙烯酸铵(NH_4PAA),晶粒之间没有明显的晶界,且气孔较大;添加柠檬酸铵(AC),晶粒分散良好,平均晶粒尺寸约为3μm。未添加分散剂时,YAG透明陶瓷在近红外波段处透光率为76%;添加NH_4PAA时,透明陶瓷透光率较低,仅为51%;而添加AC后透明陶瓷透光率可达到78%。添加AC能够细化YAG透明陶瓷晶粒,促进残余气孔排出,从而使YAG透明陶瓷获得更高的透光率。     

超声波及分散剂对纳米SiO2/CaCO3/Al2O3颗粒分散特性的影响

在材料科学领域,颗粒的均匀分散是获得具有较好的显微结构和性能材料制品的基础。采用分光光度计法表征分散效果,研究了超声波及不同分散稳定剂复合作用下纳米SiO_2、纳米CaCO_3、纳米Al_2O_3颗粒的分散性能,并结合DLVO理论探讨了分散机理,给出了分散剂优选方案。结果表明,超声波处理纳米颗粒悬浮液可以有效打破纳米颗粒团聚;不同分散剂对不同纳米颗粒的分散效果差异较大,NS颗粒相比NC、NA更难被分散剂分散,分散剂SHMP、SDBS作用效果随用量的增大先增强后减弱,分散剂PCS作用效果随用量的增加而增强;分散剂种类、用量会影响纳米悬浮颗粒的双电层厚度和颗粒周围空间微环境,从而影响分散体系的稳定性。     

Selectivity of Hydrophilic and Hydrophobic TiO2 for Organic‐Based Dispersants

The effects of the surface chemistry of TiO₂ powders on the dispersion performance of various dispersants are studied. Four common dispersants (oleic acid, oleylamine, oleyl phosphate, and tris‐(2‐butoxyethyl) phosphate) with different functional groups (carboxyl (–COOH), amino (–NH₂), phosphate (–P(=O)(OH)₂), and –P(=O)) are investigated for their potential to disperse hydrophilic and hydrophobic titania (TiO₂) powders. The outcomes, based on adsorption kinetics, adsorption isotherms, rheologies, and theoretical calculations, indicate that the hydrophilic TiO₂ is more sensitive to the chemistry of dispersants as compared to the hydrophobic TiO₂. However, the relative dispersion efficiencies of the dispersants are not found relevant to the adsorption kinetics, which is dominated by the adsorption amount. In addition, hydrogen bonding between –OH groups of the phosphate‐based dispersants dominates their dispersion ability for TiO₂.     

Demonstrating Improved Fuel Economy Using Subsystem Specific Lubricants on a Modified Diesel Engine

Fuel economy performance in modern internal combustion engines is of increasing importance to lubricant formulators due to regulations targeting global greenhouse gas emissions. Engines typically employ a single lubricant, with a common sump, to service all components. As a result, base oil and additive selection for fuel economy performance is a compromise among competing demands for different engine subsystems. Opportunities for significant fuel economy improvement through targeted formulation of lubricants for specific engine subsystems are presented, with specific emphasis on segregating the lubricant supplies for the valve train and the power cylinder subsystems. A working prototype was developed in a lab environment by modifying a commercially available twin-cylinder diesel engine. Motored valve train and whole-engine fired test results were obtained and compared to model data. Fuel economy benefits were demonstrated using market representative heavy-duty diesel lubricants, including mineral oil and polyalphaolefin (PAO) blends. The fuel economy benefits of a dual-loop lubricant system are demonstrated through significant viscosity reduction in the power cylinder subsystem, achieving overall engine friction reductions of up to 8% for the investigated operating condition. Results suggest that additional gains may be realized through targeted base oil and additive formulation. Implications for incorporation in larger diesel engines are also considered.