Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

燕山石化巨型塔器整体液压连续平移技术

北京燕山石化两巨型塔器在国内首次使用整体液压连续平移技术安装成功。该项技术可缩短工期,降低费用,提高安装的平稳性。     

纵向循环流动调频连续波一氧化碳激光器

本文叙述了纵向循环对流式调频连续波一氧化碳激光器的研制工作,报导了激光器在慢速和快速流动两种工作方式下的运行实验。在气体配比为O_2∶CO∶N_2∶He=10∶80∶150∶800(ml/min),总气压P=14.2Torr,放电电流I=14mA的慢速流动条件下,单线输出功率达到4.55W。在60∶100∶100∶800(ml/min)配比和6.0Torr气压下,快速流动使单线功率从慢速流动的1.92W提高到4.74W。增加外冷却,在I=24mA时,最佳输出功率达到了6.34W。     

一种便于观测的信号抽样及复原方法

利用倍频器，将重复频率与连续信号ｔ（ｔ）的频率相同的方波进行若干次倍频后，对连续信号进行抽样，从而获得离散的抽样信号ｆｓ（ｔ），再利用有源低通滤波器使其复原成连续信号ｆ（ｔ）。避免了一般抽样器不便于观测的缺点。     

小方坯连铸机的PLC自动控制

本文对弧型小方坯连铸机工艺与设备进行了分析，介绍了连铸生产的ＰＬＣ控制系统。及其软件设计。     

铅黄铜水平连铸棒材熔铸工艺的试验研究

在工业生产条件下，对影响HPb59－1水平连铸律材热轧开裂的熔铸工艺进行了试验研究．取三个熔铸工艺因素：铸造速度、冷却水压力、冷却水温度．试验结果表明；铸造速度对热轧开裂影响极为显著，使其控制在410mm／min左右可获得较为理想的效果．     

Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.     

圆筒混合机振动和粘漏料问题及解决办法

对圆筒混合机长期未得彻底解决的振动、大型零部件寿命短、筒体内壁粘料、进料漏斗堵料与漏料等问题进行了原因分析；根据宝钢烧结分厂的实践经验提出了解决办法。     

Modeling and simulation of the drying of thin sheets in a continuous infrared dryer

The model gives the temperature and moisture distributions of the air, and of the moist sheet, as a function of time and distance in the dryer. The influence of the sheet's velocity and that of the radiant energy on the dryer performance as well as the effect of the moisture content of the entering sheet have been studied. A set of 27 experiments was carried out using the infrared dryer in order to calibrate the model. In these, the following three variables each had three operational levels: web velocity, initial web moisture and heating power. The model predictions agreed very well with the experimental data. Model predictions using arithmetic averages for the parameters, and parameters correlated with operational variables, are also presented and discussed.