植物油制备生物柴油的研究

分别以菜籽油、大豆油以及芸香籽油为原料，采用碱催化酯交换法制备了脂肪酸甲酯即生物柴油。结果表明，用碱催化酯交换法制备脂肪酸甲酯，原料的酸价低于1．5mgKOH／g时能够保证较高的脂肪酸甲酯收率，采用酸催化预酯化法对高酸价的油脂原料进行脱酸效果比较显著。浓硫酸不仅是油脂预酯化脱酸反应的催化剂，也是油脂与甲醇进行酯交换反应的催化剂，但与甲醇钠等碱性催化剂相比，相同条件下的酯交换反应转化率低。采用减压蒸馏的方法提纯生物柴油，在0．098MPa的真空度下应控制其馏出温度不超过240℃。     

对映选择性氢化法合成苯甘氨酸甲酯

以α 肟基苯乙酸甲酯为原料,硫酸奎宁为修饰剂,通过Pd/C催化氢化合成苯甘氨酸甲酯。考察了反应温度、溶剂、修饰剂的量对对映选择性的影响。最佳反应条件:25～28℃、乙醇为溶剂、氢气压力101 325kPa、n(修饰剂)∶n(底物)=1∶10,苯甘氨酸甲酯的光学产率达51 3%。     

Larval osmeterial secretions of the swallowtails (Papilio)

The larval osmeterial secretions of sixPapilio species examined displayed a remarkable qualitative change at the fourth larval ecdysis. The secretions of 4th (penultimate) instar larvae ofP. machaon, P. memnon, P. helenus, P. bianor, andP. maackii principally comprised mono- and/or sesquiterpenoids. The compounds identified from these species included -pinene, sabinene, -myrcene, limonene, -phellandrene, (Z)--ocimene, (E)--ocimene, -elemene, -caryophyllene, (E)--farnesene, -selinene, (E,E)--farnesene, germacrene-A, germacrene-B, caryophyllene oxide, methyl 3-hydroxy-n-butyrate, and acetic acid. In contrast, the secretion of 4th larval instar ofP. xuthus, although containing similar terpenic compounds, was accompanied by large amounts of aliphatic acids and their esters: isobutyric acid, 2-methylbutyric acid, methyl isobutyrate and methyl 2-methylbutyrate. On the other hand, the osmeterial secretions of 5th (last) instar larvae varied little in quality among the six species, and the identified compounds consisted of isobutyric acid, 2-methylbutyric acid, methyl isobutyrate, ethyl isobutyrate, methyl 2-methylbutyrate, ethyl 2-methylbutyrate, and isovaleric acid, the last of which was specific toP. bianor andP. maackii. The chemical alteration of osmeterial exudate synchronized at the final larval ecdysis with the larval morphological change (particularly in body coloration) that appears to be of defensive significance against predators.     

Mechanical characterization and chemical resistances of cured unsaturated polyester resins modified with vinyl ester resins based on recycled poly(ethylene terephthalate)

Unsaturated polyester resin (UP) was prepared from glycolyzed oligomer of poly(ethylene terephthalate) (PET) waste based on diethylene glycol (DEG). New diacrylate and dimethacrylate vinyl ester resins prepared from glycolysis of PET with tetraethylene glycol were blended with UP to study the mechanical characteristics of the cured UP. The vinyl ester resins were used as crosslinking agents for unsaturated polyester resin diluted with styrene, using free‐radical initiator and accelerator. The mechanical properties of the cured UP resins were evaluated. The compressive properties of the cured UP/styrene resins in the presence of different vinyl ester concentrations were evaluated. Increasing the vinyl ester content led to a pronounced improvement in the compression strength. The chemical resistances of the cured resins were evaluated through hot water, solvents, acid, and alkali resistance measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3175–3182, 2007     

Moisture absorption by cyanate ester modified epoxy resin matrices. Part I. Effect of spiking parameters

The moisture absorption of cyanate ester modified epoxy resin matrices has been studied under thermal spiking conditions. Enhanced moisture absorption has been observed at spike-temperatures above 120 °C. The results of the desorption studies on both control specimens and the spiked specimens showed that some of the water molecules remained entrained in the polymer. It is postulated that this water could be associated with that which is hydrogen bonded or from the hydrolysis of isolated residual cyanate ester groups because the concentration of entrained water remains constant at spike-temperatures below 180 °C. Above 180 °C a thermally activated process, leading to chain scission as indicated by a reduced recoverability of the glass transition temperature (T_g) on drying.On isothermal resorption, the moisture concentration was found to be similar to that achieved through thermal spiking, showing that the entrained water at the lower spike-temperatures can also be achieved under mild conditions. The T_g is reversibly recovered to within 5 °C, which indicates a degree of relaxation rather than degradation. The moisture diffusion coefficient estimated from the resorption curves is lower than those estimated from the absorption and desorption curves. The isothermal resorption diffusion coefficient also decreased with increasing spike temperature. It is proposed that thermal spiking induced a relaxation of the network but as the spike-temperature approaches the transition region of the wet polymer, further hydrolytically induced relaxation events become feasible.     

Poly(silyl ester)s: A new route of synthesis via the condensation of Di‐tert‐butyl ester of dicarboxylic acid with dichlorosilane

Poly(silyl ester)s were synthesized by a new route via the condensation of di‐tert‐butyl ester of dicarboxylic acid with dichlorosilane by the elimination of tert‐butyl chloride as a driving force. Three new poly(silyl ester)s with molecular weights typically ranging from 2000 to 5000 amu were produced by the condensation of di‐tert‐butyl adipate with 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl trisiloxane and di‐tert‐butyl fumarate with 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl trisiloxane or 1,3‐dichlorotetramethyl disiloxane. Each polymer was characterized with infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. This new approach showed several advantages. First, it did not require a catalyst or solvent. Second, the tert‐butyl chloride byproduct was volatile and was easily eliminated. Third, there was no reaction between the growing poly(silyl ester)s and the condensation byproduct, tert‐butyl chloride. Fourth, the monomers could be readily purified. Finally, the polymerization could be performed at relatively low temperatures and in a short time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1378–1384, 2006     

阳离子交换树脂催化合成十三碳二元酸二乙酯

以强酸性阳离子交换树脂为催化剂,十三碳二元酸与乙醇为原料合成十三碳二元酸二乙酯,考察了影响反应的因素。结果表明:醇酸摩尔比为4∶1,催化剂用量为酸质量的2%,在3分子筛脱水的情况下反应7 h,酯化率达98.4%,并且催化剂可重复使用3次。     

Synthesis and characterization of poly(urethane‐ester)s based on calcium salt of mono(hydroxybutyl)phthalate

Calcium‐containing poly(urethane‐ester)s (PUEs) were prepared by reacting diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and hydroxyl‐terminated poly(1,4‐butylene glutarate) [HTPBG₁₀₀₀], using di‐n‐butyltin‐dilaurate as catalyst. About six calcium‐containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:HTPBG₁₀₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4, and 1:3:4. Two blank PUEs were synthesized by the reaction of HTPBG₁₀₀₀ with diisocyanate (HMDI or TDI). The polymers were characterized by IR, ¹H NMR, Solid state ¹³C‐CP‐MAS NMR, TGA, DSC, XRD, solubility, and viscosity studies. The T_g value of PUEs increases with increase in the calcium content and decreases with increase in soft segment content. The viscosity of the calcium‐containing PUEs increases with increase in the soft segment content and decreases with increase in the calcium content. X‐ray diffraction patterns of the polymers show that the HMDI‐based polymers are partially crystalline and TDI‐based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium‐containing PUEs based on HMDI shows that with increase in the calcium content of polymer, modulus (g′ and g″) increases at any given temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1720–1727, 2006     

Kinetics and mechanism of ?-caprolactone and l,l-lactide polymerization coinitiated with zinc octoate or aluminum acetylacetonate: The next proofs for the general alkoxide mechanism and synthetic applications

Following our previous papers on mechanism of cyclic esters' polymerization coinitiated by tin(II) octoate [tin(II) bis-(2-ethylhexanoate), (Sn(Oct)₂)] in the presence of either the low molar mass coinitiator (an alcohol, hydroxy acid, or H₂O) or a macromolecule fitted with a hydroxy end group (ROH), the present work deals with ?-caprolactone (CL) and l,l-lactide (LA) polymerizations coinitiated with zinc octoate (Zn(Oct)₂) or aluminum acetylacetonate (Al(Acac)₃). A series of kinetic measurements revealed that similarly as in the Sn(Oct)₂ coinitiated process, these polymerizations proceed by simple monomer insertion into the …Mt-OR bond, reversibly formed in the reaction -Mt-L + ROH ? …-Mt-OR + LH (where Mt = Sn, Zn or Al; L = Oct or Acac), taking place throughout the whole polymerization process. MtL_n itself does not play an active role in the polymerization. Applicability of the commercially available Zn(Oct)₂ or Al(Acac)₃ for the aliphatic polyester (10³ ≤ M_n ≤ 4 × 10⁵) synthesis is also discussed.     

环氧乙烯基酯树脂 (Ⅲ)环氧乙烯基酯树脂在有机溶剂中的稳定性

对环氧乙烯基酯树脂在有机溶剂中的稳定性作了理论上的探讨,并提供了3种环氧乙烯基酯树脂的溶解度参数实验数据。