TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

一种两性离子聚合物的合成性能及应用分析

本文合成了一种两性离子聚合物：丙烯酰胺—二甲基二烯丙基氯化铵—丙烯酸共聚物（ＰＡＤＡ），讨论了三种单体的投料比对产物的组成影响。对它的结构进行了红外表征，就其絮凝、粘土防膨、抗温、抗盐性能进行了研究。结果表明：ＰＡＤＡ具有好的防膨能力和良好的抗温抗盐性能，并有絮凝能力。     

Nb,Ti微合金钢热变形的动态模拟变形抗力模型

本文报道 Nb,Ti 微合金钢的热变形动态模拟变形抗力模型。在试验中用热加工模拟试验机进行高温压缩试验,其变形温度为1123—1423K,变形速率为0.1—60s~(-1)。结果表明,在峰值以前该钢种的流变应力数学模型为:σ=5.99.ε~(0.167)·(?)~(6.47×10~(-5)·T)·exp(4064/T)。形变激活能(Q)为444 kJ/mol,β系数为0.080。峰值应力(σ_p),临界应变(ε_c)和温度补偿应变速率参数(Z)之间的关系分别为:σ_p=12.56·lnZ-391.8;lnε_c=0.157·lnZ-7.39。     

化学镀Ni-P合金/TiO2复合膜的耐蚀性研究

在改进常规制备方法的基础上，提出化学镀/溶胶-凝胶复合法在碳钢表面制备TiO2复合膜的新技术。用衍射研究了复合膜的组织形态，采用环境扫描电镜（ESEM）表征了复合膜的表观和断面形貌，用极化电阻、阳极极化曲线测量等方法研究TiO2复合膜在0.5mol/L硫酸和0.5mol/L氯化钠溶液中的耐蚀性能。结果表明A3钢表面的TiO2复合膜耐蚀性能优良。     

金属清净剂的性能研究

为了改进金属清净剂的抗氧性和极压抗磨性能，用一种含硫磷的羧酸衍生物部分中和清净剂中过碱性组分，得到两种改进的金属清净剂，并用四球机和热重分析仪评价其极压抗磨和抗氧化性能。结果表明功能化处理提高了金属清净剂抗氧化和极压性能，但未对分散和抗磨性能产生显著影响。     

TJ10—74与GBJ10—89规范受弯构件正截面抗力转换系数

分析了 TJ10—74规范受弯构件正截面诸修订因素(砼强度“双改方案”、设计表达式、正截面计算方法……).在此基础上推演出 TJ10—74与GBJ10—89两规范关于受弯构件抗力转换系数.可供结构设计使用.     

快速评定砂浆配方对钢筋腐蚀的影响

用电化学方法测定砂浆试件中钢筋的极化电阻，并测定了砂浆的孔隙率，结果发现:砂浆的孔隙率、孔径分布与钢筋极化电阻大小有良好的对应关系。电化学方法能可靠、快速测定砂浆配合比、添加剂对钢筋腐蚀速度的影响。     

离子注入对Cr12MoV钢表面组织结构和力学性能的影响

研究了Ｃｒ１２ＭｏＶ钢离子注入层的显微组织特征及其对表面性能的影响。结果表明，离子注入使Ｃｒ１２ＭｏＶ钢的表面硬度和耐磨性能得到显著改善，且存在着一个最佳的注入剂量，约为３×１０＾１＾７Ｎ＾＋／ｃｍ＾２左右。离了注入在Ｃｒ１２ＭｏＶ钢表面层中形成了大量细小弥散的第二相粒子，并使α－Ｆｅ晶格发生严重畸变，从而引起材料表面强化。     

ZnO陶瓷材料的负阻特性

介绍了ＺｎＯ陶瓷的负阻特性，主要研究了ＭｎＯ２掺杂和Ｎｉ２Ｏ３掺杂对ＺｎＯ陶瓷负阻特性的影响。