聚醋酸乙烯酯共聚乳液的改性研究

以醋酸乙烯酯为原料,聚乙烯醇为保护胶体,丙烯酸、丙烯酸丁酯为改性单体,研究了单体配比、引发剂、乳化剂用量和温度对醋酸乙烯酯共聚乳液性能的影响。研究表明,当丙烯酸丁酯与醋酸乙烯酯的质量比为12/30,引发剂的质量分数为0.15%,乳化剂的质量分数为0.3%,在反应温度为75℃时,可制得性能优异的聚醋酸乙烯酯胶粘剂,其T型剥离强度和耐水性能可达105 N/25mm和67 N/25mm。     

聚碳酸酯光学性能应用及改进研究进展

概述了光学级聚碳酸酯结构与光学性能的关系和其在光学领域的应用,对其光学异向性产生的原因进行了讨论,并对改善聚碳酸酯光学异向性的途径进行了归纳,通过采用共聚、共混方法可使聚碳酸酯的双折射得到有效的降低。     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Surface properties of block and graft polystyrene–polydimethylsiloxane copolymers

The surface compositions of a series of polystyrene‐b‐polydimethylsiloxane (PS‐b‐PDMS) and polystyrene‐g‐polydimethylsiloxane (PS‐g‐PDMS) copolymers were investigated using ATR‐FTIR and XPS technique. The results showed that enrichment of PDMS soft segments occurred on the surface of the block copolymers as well as on that of graft copolymers. And the magnitude order of the enrichment was as follows: PS‐b‐PDMS > PS‐g‐PDMS, which was attributed to the facilitating of the movement of the PDMS segments in PS‐b‐PDMS copolymer. Meanwhile, the solvent type and the contact medium had influence on the accumulation of PDMS on the surfaces. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

疏水缔合水溶性聚合物P(AM/NaAA/DiAC_(16))水溶液的黏度行为

采取前加碱二元胶束共聚-后水解法合成了三元疏水缔合水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N,N-双烯丙基十六胺)[P(AM/NaAA/DiAC16)],研究了其水溶液的黏度行为。当x(DiAC16)=0.10%~0.40%时,在30℃、1 mol/LNaCl水溶液中,P(AM/NaAA/DiAC16)的特性黏数[η]、Huggins常数KH、黏均相对分子质量Mη分别为22.59~19.62 dL/g、0.144~0.294和12.49×106~10.47×106g/mol;KH小于0.8,表明其分子内缔合作用较弱。P(AM/NaAA/DiAC16)在矿化度为19 334μg/g盐水溶液中的表观黏度随疏水单体用量的增加而增加,随温度、剪切速率的增加而降低。在NaCl、CaCl2的离子强度分别为1.26×10-3~4.88×10-3mol/kg、1.07×10-4~5.28×10-4mol/kg的水溶液中,P(AM/NaAA/DiAC16)出现盐增黏现象,疏水单体用量越高,盐增黏效应越显著。当ρ(SDS)=0~0.07 g/dL时,P(AM/NaAA/DiAC16)水溶液的表观黏度有明显增加,表明P(AM/NaAA/DiAC16)/SDS分子缔合作用较强。     

新型后过渡金属烯烃催化剂的研究进展

综述了近年来－系列新型α－二亚胺型后过渡金属（Ni、Pd、Fe、Co）催化剂在烯烃聚合、极性单体共聚、烯烃齐聚、环烯烃加成聚合、烯烃活性聚合和聚烯烃纳米复合物等方面的最新进展。系统地阐述了不同的中心过渡金属离子、α－二亚胺骨架、骨架上的取代基和不同的聚合条件（温度、压力）分别对催化剂的聚合活性、聚烯烃支化率、聚合物分子量和分子量分布以及聚合产物的性质等影响，并且简要说明了这一类催化剂的制备方法和新特点。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Synthesis of copolymers of tert‐butyl vinyl ether with maleic and citraconic anhydrides

In the present study, the effects of charge‐transfer complex formation and intramolecular fragmentation (side‐chain lactonization) in radical copolymerization of tert‐butyl vinyl ether (t‐BVE) with anhydrides of maleic (MA) and citraconic (CA) acids and the structure–thermal behavior relationships of the resulting copolymers were examined using the ¹H‐NMR, FTIR, DSC, and TGA analysis methods. It was shown that copolymerization under the chosen conditions proceeded through intramolecular fragmentation with the formation of γ‐lactone units. Side‐chain fragmentation of t‐BVE–MA and t‐BVE–CA copolymers also was confirmed by TGA and DSC analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2455–2463, 2006 2006     

Preparation of polypropylene/montmorillonite nanocomposites with an exfoliated structure by a designed route

Nanocomposites of polypropylene (PP) and montmorillonites (MMT) were prepared by solid‐phase grafting reactive organomontmorillonite (ROMT) and polar monomers onto powdered PP and melt‐blending granule PP with the master batches as PP/MMT grafting copolymers (PPMG). The structure and properties of the PP/MMT nanocomposites (PPMN) were investigated by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) patterns, transmission electron microscopy (TEM), dynamic mechanical analysis, differential scanning calorimetry, and thermogravimetric analysis. GPC showed that the numerical molecular weight and polydispersity of the graft copolymers of PPMG were approximately 4793 and 2.197, respectively. FTIR confirmed the solid‐phase graft copolymerization. XRD and TEM indicated the formation of the exfoliated, layered silicates (tactoids). The mole ratio of compound alkylammoniums and the exothermic enthalpy from solid‐phase graft copolymerization played key roles in the formation of tactoids. The optimum mole ratio of organophilic alkylammonium to reactive alkylammonium was 3 : 1. The mechanical and thermal properties increased with the contents of PPMG, and a preferable state was achieved at approximately 8 phr PPMG (parts of reagent per 100 parts of PP) because of the plastification of the exfoliated silicates and the graft copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3889–3899, 2006