Alginic acid‐g‐poly(N‐vinylformamide) graft copolymer: Synthesis,characerization, swelling,and flocculation property

The graft copolymer of N‐vinylformamide with alginic acid was synthesized by free radical polymerization using potassium peroxymonosulphate and thiourea as redox pair in inert atmosphere. The optimum conditions for maximum grafting have been determined by varying the concentrations of N‐vinylformamide, potassium peroxymonosulphate, thiourea, sulfuric acid, alginic acid as well as time duration and temperature. The grafting parameters increase up to the certain concentrations of N‐vinylformamide, potassium peroxymonosulhate, thiourea, and hydrogen ion while thereafter grafting parameters decrease. The effect of alginic acid concentration on grafting parameters has been observed to decrease continuously. It has also been found that grafting parameters increase up to certain time and temperature, respectively, and thereafter decrease. The swelling properties of graft copolymer in terms of swelling ratio and percent swelling are investigated. Flocculation property of pure and grafted sample for both coking and noncoking coals is also investigated for the treatment of coal mine waste water. The graft copolymer has been characterized by Fourier transform infrared spectroscopy as well as thermogravimetic analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polymer electrolyte membrane with nanomatrix channel prepared by sulfonation of natural rubber grafted with polystyrene

High‐proton‐conductive polymer electrolyte with a nanomatrix channel was prepared by graft copolymerization of styrene onto deproteinized natural rubber followed by sulfonation with chlorosulfonic acid. First, natural rubber latex was purified with urea in the presence of surfactant to remove almost all proteins present in the rubber. Second, graft copolymerization of styrene onto deproteinized natural rubber was carried out with tert‐butyl hydroperoxide/tetraethylenepentamine as an initiator at 30°C in latex stage. The graft‐copolymerized natural rubber (DPNR‐graft‐PS) was sulfonated with chlorosulfonic acid in chloroform solution at an ambient temperature. The resulting sulfonated DPNR‐graft‐PS was characterized by FTIR spectroscopy, solid state ¹³C CP/MAS NMR spectroscopy, elemental analysis, and transmission electron microscopy. High proton conductivity of about 0.1 S/cm, less water uptake of 24 wt % and comparatively good stress at break of 9 MPa were accomplished at suitable contents of styrene units and sulfur, i.e., 32 wt % and 75 mol %, respectively. The high proton conductivity, excellent stability, and good mechanical properties were associated with not only the formation of the nanomatrix channel but also a specific concentration of sulfuric acid group. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Polyacrylamide‐grafted carboxymethyl cellulose: Smart pH‐sensitive hydrogel for protein concentration

A novel application, utilizing polyacrylamide‐g‐carboxymethyl cellulose (CMC‐g‐PAM) in concentrating dilute solutions of Bovine serum albumin (BSA), was investigated. The grafting reaction parameters were investigated and the hydrogel smartness was verified. FT‐IR proved that the grafting reaction occurred between the hydroxyl group located in anhydroglucose C₂ position of CMC and the π‐bond of PAM and SEM confirmed a changed morphology to a fibrillar structure. The pH sensitivity was proved; as the grafted polymer attained its maximum swelling at pH 7.2 while the minimum swelling was observed under acidic conditions (pH 1‐3). The rate of water uptake in the grafted polymer hydrogel was higher than that of the homopolymer hydrogel and the swelling behaviors of both hydrogels obeyed second‐order kinetics. The tested hydrogel showed a high potency towards concentrating BSA solutions with a concentration factor of 1 to 4.5 times and recovery of 60–90%. The concentration factor increased linearly with increasing both the polymer concentration and the process time and decreased with the increase in the protein concentration. The grafted polymer had stable efficiency in the concentration process for 20 cycles. The obtained results have recommended the employment of the prepared CMC‐g‐PAM hydrogel in the down stream protein concentration process in the industrial scale. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation and application of glycidyl methacrylate and methacrylic acid monomer mixture‐grafted poly(ethylene terephthalate) fibers for removal of methylene blue from aqueous solution

A novel fibrous adsorbent that grafts glycidyl methacrylate (GMA) and methacrylic acid (MAA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers was used for removal of methylene blue (MB) in aqueous solutions by a batch equilibration technique. The operation parameters investigated included, pH of solution, removal time, graft yield, dye concentration, and reaction temperature. The adsorption rate of MB is much higher on the MAA/GMA‐grafted PET fibers than on the ungrafted PET fibers. MB was removed 99% the initial dye concentration at 10 mg L⁻¹ and 93% at 200 mg L⁻¹ by monomers mixture‐grafted PET fibers. Pseudofirst order and pseudosecond order kinetic equations were used to examine the experimental data of different graft yield. It was found that the pseudosecond order kinetic equation described the data of dye adsorption on fibrous adsorbent very well. The experimental isotherms data were analyzed using Langmuir and Freundlich isotherm models. The data was that Freundlich isotherm model fits the data very well for the dyes on the fibers adsorbent. The dye adsorbed was easily desorbed by treating with acetic acid/methanol mixture (50% V/V) at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of novel crosslinked poly[glycidyl methacrylate–poly(ethylene glycol) methyl ether methacrylate] as gel polymer electrolytes

In this study, glycidyl methacrylate was copolymerized with poly(ethylene glycol) methyl ether methacrylate to obtain a copolymer {poly[glycidyl methacrylate–poly(ethylene glycol) methyl ether methacrylate] [P(GMA–PEGMA)]}, which was crosslinked with α,ω‐diamino poly(propylene oxide) (Jeffamine) at various weight ratios and molecular weights to form novel gel polymer electrolytes (GPEs). The crosslinked copolymers were characterized by Fourier transform infrared spectroscopy and thermal analysis. The crosslinked polymers were amorphous in the pristine state and became crystallized after they were doped with lithium electrolyte. Furthermore, the crosslinking degree of the crosslinked polymers increased with increasing weight ratio of Jeffamine, and both the swelling properties and mechanical behaviors of the crosslinked polymers were heavily affected by the weight ratio and molecular weight of Jeffamine. The ionic conductivity (σ) of the GPEs from the crosslinked copolymers was determined by alternating‐current impedance spectroscopy. A higher molecular weight and increased weight ratio of Jeffamine resulted in a higher σ. The GPE based on P(GMA–PEGMA) crosslinked with an equal weight of Jeffamine D2000 exhibited the highest σ of 8.29 × 10⁻⁴ S/cm at 25°C and had a moderate mechanical strength. These crosslinked copolymers could be potential candidates for the construction of rechargeable lithium batteries. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and properties of degradable poly(l‐lactic acid)/poly(butylene terephthalate) copolyesters containing 1,4‐cyclohexanedimethanol

High‐molecular‐weight copolyesters based on poly(butylene terephthalate) as rigid aromatic segments and poly(l‐lactic acid) (PLLA) as degradable aliphatic segments were synthesized via the polycondensation of terephthalic acid, 1,4‐butanediol (BDO), 1,4‐cyclohexanedimethanol (CHDM), and PLLA oligomer. By tailoring the molar ratio of diols (BDO and CHDM), we investigated in detail the effects of the CHDM rigid hexacyclic ring on the synthesis, mechanical properties, thermal stabilities, and degradation behaviors of the copolyesters. With increasing CHDM content, the initial decomposition temperature increased from 282.5 to 322.2°C, and the tensile strength improved by nearly four times, from 5.4 to 19 MPa. When the molar ratio of BDO/CHDM was 95/5, the weight‐average molecular weight of the copolyester was 89,400 g/mol with a polydispersity of 1.96. In addition, hydrolytic degradation results in phosphate buffer solution indicate that the degradation rate of the copolyesters displayed a strong dependency on the temperature and CHDM composition. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

聚丙烯固相接枝的研究及应用进展

综述了聚丙烯(PP)固相接枝技术的研究进展,重点介绍了固相接枝的机理及分类,讨论了一些主要因素如引发剂,辐射或预辐射剂量,光敏剂和光照时间对接枝率的影响,并简要介绍了聚丙烯接枝物的应用前景和固相接枝设备的发展。     

含能聚氨酯热塑性黏合剂GAP/PBAMO的性能

以聚双叠氮甲基氧杂环丁烷(PBAMO)为硬段,聚缩水甘油醚(GAP)为软段,采用一锅法扩链合成了含能聚氨酯黏合剂(GAP/PBAMO).实验中合成了不同硬段含量的黏合剂,并采用FT-IR、NMR、GPC、XRD、DSC和SEM等对其结构和性能进行了表征.结果表明,硬段质量分数为66.7%时,该热塑性黏合剂具有较好的耐热...     

纳米载体两亲性接枝共聚物及其在农药中的应用

两亲性接枝共聚物是纳米胶囊的主要组成部分, 在药物领域得到了广泛的关注。本文综述了两亲性接枝共聚物的研究现状, 重点阐述了两亲性接枝共聚物的制备、性质及其应用, 展望了两亲性接枝共聚物在农药领域中的应用前景。     

Preparation and application of sulfonated poly(1‐octene‐co‐styrene)

In this article, 1‐octene and styrene was copolymerized by the supported catalyst (TiCl₄/ID/MgCl₂). Subsequently, by sulfonation reaction, sulfonated poly(1‐octene‐co‐styrene)s which were amphiphilic copolymers were prepared. The copolymerization behavior between 1‐octene and styrene is moderate ideal behavior. Copolymers prepared by this catalyst contain appreciable amounts of both 1‐octene and styrene. Increase in the feed ratio of styrene/1‐octene leads to increase in styrene content in copolymer and decrease in molecular weight. As the polymerization temperature increases, the styrene content in the copolymers increases, however, the molecular weight decreases. Hydrogen is an efficient regulator to lower the molecular weights of poly(1‐octene‐co‐styrene)s. The sulfonation degree of the sulfonated poly(1‐octene‐co‐styrene)s increased as the styrene content in copolymer increased or the molecular weight decreased. Thirty‐six hour is long enough for sulfonation reaction. The sulfonated poly(1‐octene‐co‐styrene)s can be used as effective and durable modifying agent to improve the wettability of polyethylene film and have potential application in emulsified fuels and for the stabilization of dispersions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011