循环式运动规约还原数值的算法分析

针对企业管理信息系统开发者在对变电所数据的自动采集和实时监控中存在的问题，描述了循环式运动规约帧结构、同步字、控制字、信息字等的组成，指出了自动采集数据的实现思路，给出了所用到的数据库表及其之间的关系，通过程序流程图详细给出了循环式运动规约中电能脉冲数值方式将二进制数据还原成十进制数值，并与其所对应的地址及电表相对应的方法。     

较大尺寸双排链轮的焊接结构改进

焊接链轮毛坯具有成本低、生产周期短的特点，但链轮结构影响焊接毛坯变形及强度。通过改进链轮毛坯的结构有效克服焊接所带来的负面影响，使得焊接链轮结构适应生产要求而得到广泛应用。     

热处理过程对锦纶6帘子线性能的影响

针对锦纶6帘子线易收缩、强度低等性能方面的不足，对其戍品纤维再次进行热处理试验，以研究纤维收缩机理和规律，进而明确工艺调整方向．研究认为，热处理温度、时间、张力是其收缩率的主要影响因素，并且也依赖于纤维解取向程度和结晶度的大小．根据这种设想，在实验室中已获得了收缩率小于4％、强度为7．3cN／dtex、断裂伸长率为22％的锦纶6帘子线。     

Unbiased estimation of inner product via higher order count sketch

Count sketch [1] is one of the popular sketching algorithms widely used for frequency estimation in data streams, and pairwise inner product for real-valued vectors [2]. Recently, Shi et al. [3] extended the count sketch (CS) and suggested a higher-order count sketch (HCS) algorithm that compresses input tensors (or vectors) into succinct tensors which closely approximates the value of queried features of the input. The major advantage of HCS is that it is more space-efficient than count sketch. However, their paper didn't comment on estimating pairwise inner product from the sketch. This note demonstrates that HCS also closely approximates the pairwise inner product. We showed that their sketch gives an unbiased estimate of the pairwise inner product, and gives a concentration analysis of the estimate.     

HZ-5303A型密度计在硫化碱生产中的应用

文章较详细的论述了HZ-5303A型工业微机密度计在蒸发车间碱液分类中的应用。主要介绍了HZ-5303A型工业微机密度计的工作原理及其标定方法,并结合笔者多年来的实践经验总结归纳了一些常见故障及处理办法。     

Grain count in castings: theoretical background and experimental verification

In this work, a theoretical model is proposed for heterogeneous nucleation on substrates whose size distributions can be described by the Weibull statistics. In particular, the proposed model suggests that the size distribution for the various nucleation sites is exponential in nature. Measurements of grain count were carried out on experimental Al–1·3Si and Al–5·0Cu single phase alloys inoculated using an Al–5Ti–1B master alloy. In addition, experimental nodular and flake graphite iron castings were processed under various metallurgical conditions. In single phase alloys, the area of the equiaxed dendritic grain count was estimated from the electron backscattering diffraction analysis, whereas the graphite nodule and graphite eutectic cell count were estimated on polished cast iron surface sections by stereological means. In addition, maximum undercoolings were determined by thermal analysis. The experimental outcome indicates that the grain count can be properly described by a proposed exponential function of the maximum undercooling at the onset of alloy solidification. Finally, the magnitudes of the nucleation parameters were experimentally determined in this work.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

异型中间包结构优化对帘线钢夹杂物的影响

为了解决帘线钢中因大颗粒夹杂物导致的拉拔断裂问题，通过水模型研究结果对异型中间包结构改进优化，并将优化异型中间包结构进行工业试验。结果表明，挡墙优化结构后,去除夹杂物的效果明显提高，采用优化的挡墙中间包生产的帘线钢铸坯中夹杂物尺寸不大于10 μm比例为87.95%，平均尺寸为6.7 μm；大颗粒的高MgO类和高SiO2类夹杂物已得到有效去除，盘条中B细不大于0.5级比例达到97.56%。     

Combinatorial Immunophenotyping of Cell Populations with an Electronic Antibody Microarray

Immunophenotyping is widely used to characterize cell populations in basic research and to diagnose diseases from surface biomarkers in the clinic. This process usually requires complex instruments such as flow cytometers or fluorescence microscopes, which are typically housed in centralized laboratories. Microfluidics are combined with an integrated electrical sensor network to create an antibody microarray for label‐free cell immunophenotyping against multiple antigens. The device works by fractionating the sample via capturing target subpopulations in an array of microfluidic chambers functionalized against different antigens and by electrically quantifying the cell capture statistics through a network of code‐multiplexed electrical sensors. Through a combinatorial arrangement of antibody sequences along different microfluidic paths, the device can measure the prevalence of different cell subpopulations in a sample from computational analysis of the electrical output signal. The device performance is characterized by analyzing heterogeneous samples of mixed tumor cell populations and then the technique is applied to determine leukocyte subpopulations in blood samples and the results are validated against complete blood cell count and flow cytometry results. Label‐free immunophenotyping of cell populations against multiple targets on a disposable electronic chip presents opportunities in global health and telemedicine applications for cell‐based diagnostics and health monitoring.     

提高自组织线性表查找性能的新方法

自组织线性表在非等概率查找中具有较好的效率。本文在原有3种基本构造策略的基础上，提出一种新方法——移至中位策略。该策略优化自组织线性表中记录的调整方式，减少了累计记录比较次数，从而提高了查找响应速度。在实验测试中，提出平稳的查找过程和非平稳的查找过程的概念，并分别设计相应的测试用例。实验结果表明，移至中位策略的综合性能最好。