A strategy for integrating product conceptualization and bid preparation

Collaboration with other members of the supply chain is one means by which small and medium sized enterprises (SMEs) can compete in today’s global business environment. Thus, early stages of the new product development process involve both technical activities, e.g., product platform definition, and commercial activities, e.g., bidding for contracts. This paper introduces an integrated collaborative bidding and design system (CBDS) to help SMEs coordinate the two aspects. General sorting was employed for initial requirements acquisition and platform definition; while a self-organizing map (SOM) neural network was combined with a concurrent cost-schedule estimation strategy for refinement of design options and bid evaluation/preparation. A case study on cellular phone design was then applied for illustrating the proposed prototype system.     

基于旋量和臂形标志的机器人运动学逆解计算

讨论了用旋量和指数积公式计算PUMA类型6自由度机器人运动学逆解的方法。在子问题的计算过程中，通过引入臂形标志来选取关节变量的合理解，以得到运动学逆解的唯一解。这种方法避免了对无效解的计算，可以减少计算量，提高计算效率。通过一个实验机器人的运动学逆解计算验证了算法的有效性。     

从生产角度论述空分设备“有效产品成本”

引入空分设备“有效产品成本”概念，以气体成本算法和液体成本算法对空分设备正常产品单位成本和有效产品单位成本进行了比较，举例计算了液化装置的产品成本，提出利用“有效产品成本”概念来组织空分设备生产。     

产品设计方案的多目标决策分析及其智能支持系统

用模糊多目标决策方法对产品设计方案进行决策分析并设计出相应的智能计算机支持系统，实例证明这一方法在实际应用中是有效的和可靠的。     

注塑产品与模具协同设计任务规划算法研究

协同设计支持多功能小组兆同参与一个产品的设计过程,在产品开发的初始阶段,合理的任务规划将有利于协同设计的顺利进行,从而提高设计效率与质量。对协同设计任务规划系统开发的关键技术进行研究,采用模糊设计结构矩阵描述设计子任务的耦合关系,提出了新的模糊排序算法指导设计过程的分解与重组;基于综合能力、兴趣和时间约束分配设计任务,并根据协同设计过程的并行度与耦合度测定,提出了新的协同设计任务调度的时间分配策略。最后以注塑产品及模具协同设计为对象进行了验证。     

舞钢管线钢的开发与生产

系统介绍了舞钢开发的针状铁素体型X70宽厚板的设计思路、工艺特点和实物水平；采用电炉 炉外精炼 连铸 TMCP工艺生产的X70宽厚板满足西气东输专用技术条件的要求，并批量应用在西气东输主干线工程中。     

-35~#轻柴油的生产

为满足市场发展的需求 ,胜利炼油厂用胜利混合原油为原料 ,根据用户要求成功开发生产了 -3 5 #轻柴油新产品。该产品完全符合国家标准GB2 5 2 -2 0 0 0中 -3 5 #轻柴油的各项质量指标要求 ,为胜利炼油厂赢得市场 ,增加了经济效益     

辐射肉品的特性及其质量控制研究

主要阐述了辐射技术对肉品微生物和肉品品质的影响,提出了对辐射肉品进行质量控制的措施,并对几种常用的肉品质量检测方法进行了阐述。     

A comparative study of short nylon fiber—Natural rubber composites prepared from dry rubber and latex masterbatch

A novel method for the preparation of short nylon fiber–natural rubber composites was developed in which short fibers chopped to approximately 6 mm were incorporated in the latex stage and processed into sheet form. By this method, mixing cycle time was reduced without compromising the fiber dispersion. Fiber breakage during mixing was reduced. The new composites when compounded with a dry bonding system based on hexamethylenetetramine, resorcinol and hydrated silica (HRH) showed improved modulus, tensile strength and abrasion resistance compared to conventional composites. Tear strength, resilience, and compression set were similar to the conventional composites. SEM analysis indicated better interaction between matrix and fibers in the case of latex master batch. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

支持专业知识获取的中间件的研究

 分析了如何利用中间件技术支持专业知识获取的问题．提出了基于XML，SOAP，UDDI和WSDL的web服务技术的专业知识获取的中间件应用模式，它可以有效解决消息传送、服务功能的抽象描述以及服务在网络上的发布与发现等问题。以固定瓦推力滑动轴承的性能参数计算Web服务为实例，指出web服务是分布式设计知识获取和知识资源集成的有效途径．