硅土在NR/SBR中的应用

阐述了硅土的结构、性质和加工工艺,对硅土在NR/SBR中的应用进行了研究,并且分别比较了硅土与炭黑、碳酸钙和陶土补强橡胶的差并.结果表明,与炭黑相比,硅土可以提高橡胶的动态力学性能、回弹和耐热氧老化性能,且胶料的综合力学性能得到提高.     

矿井多级机站可控式通风系统的研究与实践

本文对矿井多级机站可控式通风系统研究工作作总结，并列举了工业应用情况，说明多级机站可控式通风技术是一种节能、易于风量痫节等特点的新技术。     

混炼型聚氨酯橡胶/聚十二内酰胺热塑性硫化胶动态硫化历程与性能

采用动态硫化方法制备了混炼型聚氨酯橡胶（MPU）/聚十二内酰胺（PA 12）热塑性硫化胶（TPV）,通过控制动态硫化时间探究了该TPV的动态硫化历程,同时研究了不同动态硫化阶段共混物的物理机械性能和动态力学性能。结果表明,随着动态硫化时间的延长,MPU/PA 12 TPV逐步完成相转变,在温度和剪切作用下,MPU相由连续相转变为分散相,而PA 12则由分散相转变为连续相;随着动态硫化时间的延长,MPU/PA 12共混物的储能模量升高,损耗模量降低,损耗因子减小。此外,随着动态硫化时间的延长,MPU/PA 12共混物的综合力学性能提高。     

祥光铜业废酸污水处理系统运行实践

介绍了阳谷祥光铜业有限公司废酸污水处理系统的工艺流程及生产运行情况。该废酸污水处理系统采用硫化—石膏—中和工艺流程。针对生产中出现的问题,技术人员进行了相应的工艺改进和优化操作。改造后,废酸污水处理系统运行平稳,各项工艺指标均达到或优于设计要求,处理后的污水达标排放。     

EPDM/ENR共混胶力学性能的研究

探讨了三元乙丙橡胶(EPDM)和环氧化天然橡胶(ENR)的共混比、加料顺序、硫化体系对EPDM/ENR共混物的硫化特性、力学性能和耐热空气老化性能的影响。结果表明,共混比不同,共混胶的性能均有差异,且共混物的力学性能低于单组分的线性加和值,但综合比较而言,当EPDM/ENR=40/60时共混胶的力学性能较好;在所研究的四种加料顺序中,以配合剂先与EPDM制成母炼胶后再与ENR共混的这一种加料顺序下所得的共混物硫化胶的力学性能最好;采用半有效硫化体系所制得的共混物硫化胶的力学性能较好。     

有机硅密封剂高温力学性能研究

在温度25~250℃对3类硫化体系的5种有机硅密封剂的拉伸强度、180o剥离强度和剪切强度的研究表明:随着温度的升高,5种有机硅密封剂的拉伸强度、180o剥离强度和剪切强度均不断下降,其中拉伸强度和剪切强度降低的速率递减。有机硅密封剂的高温性能变化与硫化体系类型密切相关,脱氢硫化体系HM321密封剂在25~150℃拉伸强度、剪切强度和180o剥离强度均最高,但在25~250℃拉伸强度、剪切强度和180o剥离强度保持率均最低。脱氨硫化体系XY-602S有机硅胶粘剂在232~250℃的拉伸强度和剪切强度最高,25~250℃的拉伸强度保持率也最高。     

加成型有机硅反应过程的实时监测

用实时傅里叶变换红外光谱仪（FTIR）对乙烯基硅橡胶和含氢硅油的加成聚合过程进行了表征，得到了基团浓度消耗比反应时间变化的曲线，结果表明，在反应过程中，硅氢基与乙烯基的浓度减少呈非线性关系，这可能是硅氢基在反应过程中与空气中的物质进行了反应，从而在消耗量上较乙烯基多的缘故。     

Yielding behaviour of thermoplastic/elastomer blends cured by gamma irradiation

Mechanical blends of thermoplastic medium density polyethylene (MDPE) and elastomeric ethylene propylene diene monomer (EPDM) have been prepared with a fixed composition of 60/40 wt%. They have been used either in their gum form or loaded with two different reinforcing fillers, high abrasion furnace (HAF) carbon black or precipitated SiO₂ (Hi Sil) of concentration 25–100 phr (parts per hundred parts of resin) with respect to the blend. Curing was achieved by gamma irradiation. Yielding properties (yield stress, yield strain and cold drawing) have been followed as a function of irradiation dose for different blend compositions. Yield stress values increased with irradiation dose and with the content of the reinforcing filler, but yield strain and cold drawing values decreased with irradiation dose and also with the filler content. The data obtained reveal that Hi Sil is more effective as a reinforcing filler, and the prepared blends are suitable for load‐bearing applications. © 2001 Society of Chemical Industry     

多级离心输油泵平衡装置设计的模糊综合评价

将模糊多目标决策方法应用于多级离心泵平衡装置设计方案的评价,使设计方案的优选更趋于合理。     

Process design for multi-stage stretch forming of aluminium alloy aircraft skin

A process design approach for multi-stage stretch forming was proposed by combining the strain distribution method and finite element method (FEM) to determine the minimum stage number and deformation amount of each stage. The strain distribution method was used to calculate the deformation amount of each stage and evaluate the formability through a safety criterion. FE simulation was taken as an analysis tool to reveal the deformation behaviour, to predict the strain contour and to determine the process parameters at each stage. To evaluate the effect of heat treatment after pre-strain on occurrence of deformation defects during the subsequent deformation, a multi-stage uniaxial tension test for 2B06 aluminium alloy sheet was carried out. A case study demonstrates that the approach has high reliability and good practicability.