天然橡胶乳液压敏胶粘剂

本文介绍了天然橡胶胶乳压敏胶的基本情况，内容包括基本组成、主要优缺点和改进方法。     

国内互穿网络结构阻尼涂料的研究进展

在总结了国内聚合物基阻尼涂料的研究基础上,详细综述了互穿网络(IPN)结构、乳液互穿网络(LIPN)结构聚合物基阻尼涂料的种类及研究现状,并展望了聚合物基阻尼涂料研究的发展趋势和前景。     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

天然胶乳浸渍制品表面起皱的研究

对用化学方法制备的天然胶乳浸渍制品表面起皱进行了研究。分析了天然胶乳浸渍制品表面起皱的原理，确定了起皱剂的选择．同时对影响起皱的因素(增稠剂、预干燥规律)进行了研究。     

Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile

Ethylene-Vinyl Acetate (EVA) redispersible powder and latex were used to modify mortar. Three kinds of curing regimes: standard curing, high temperature curing and freeze-thaw circle curing were adopted to cure the bonded samples. Bonding strength of EVA modified mortar was tested at 28 days. The development of bonding strengths under all three curing regimes were discussed and compared. The experimental results show that bonding strength increases with the increase of EVA content in mortar. The curing regi...     

Methods of Modifying the Brittle Behavior of Cementitious Composites

We put forward effective methods of increasing the tensile strain of cementitious composites with 2% PVA fiber and high fly ash content. The test results show that curing condition has a significantly effect on the tensile performance. It is approved that the specimens incorporated appropriate volume fraction rubber powder and lightweight aggregate greatly increase the tensile strain of composites at medium-term age, but indefinitely at long-term age. To a certain extent, EVA can limitedly enhance the tensi...     

水性彩瓦乳胶漆的研制与生产

介绍水性彩瓦乳胶漆试制的全过程,其工艺特点是将所用颜料、填料粉未先制成颜料浆、填料浆。在配制彩瓦漆时,直接在成膜乳液中加颜料浆、填料浆及助剂,经分散过滤即得成品,因此,本文突出了水性颜料浆的制备,并详细介绍了对分散剂的选择试验。     

MBS树脂合成技术的中试研究(Ⅲ)MBS胶乳的凝聚

阐述了聚合物乳液的凝聚机理和MBS接枝胶乳的凝聚工艺,在MBS胶乳凝聚小试研究和MBS接枝胶乳中试研究的基础上进行了MBS接枝胶乳凝聚的中试研究,着重研究了凝聚剂种类、用量和加料方式以及凝聚温度、水胶比等对MBS粉料堆密度和粒度分布的影响,确定了MBS胶乳的凝聚工艺,为5 000 t/a MBS树脂生产装置提供了设计依据.     

三氯溴甲烷改性天然胶乳的研究

用三氯溴甲烷改性天然胶乳，研究了反应时间、反应温度、三氯溴甲烷的用量等对改性胶乳的硫化胶膜物理机械性能的影响，利用DSC对产物进行了分析。结果表明，反应时间为10h，反应温度在35℃时，所得胶膜物理机械性能较好；随着三氯溴甲烷用量的增加，改性天然胶乳的硫化胶膜物理机械性能下降：三氯溴甲烷改性天然胶乳的玻璃化温度高于未改性天然胶乳。     

Thermal/pH-sensitive core-shell copolymer latex and its potential for targeting drug carrier application

In this work, the synthesis, properties of a thermal/pH-sensitive core-shell copolymer latex were studied and its potential application as a targeting drug carrier was also investigated, where the crosslinked copolymer of N-isopropylacrylamide (NIPAAm) and chitosan was synthesized by soapless dispersion polymerization as the core, and the copolymer of methacrylic acid (MAA) and methyl methacrylate (MMA) was prepared as the shell. The weight ratio of chitosan/NIPAAm and the concentration of crosslinking agent in feed had been changed to investigate their effects on the particle size, reaction rate, zeta potential, surface functional groups, and specific surface area of latex particles. The swelling and thermo-sensitive behavior of the film made from these core-shell latexes were also studied under different pH values of buffer solution. The model drug (caffeine) could be loaded inside the copolymer particles and protected from releasing through the transport process effectively. And the thermo-responsive property of these copolymer particles significantly enhanced the protein conjugation that showed the potential of the latex being applied on the targeting drug carrier.