丁腈橡胶的发展现状与应用研究进展

综述了国内丁腈橡胶(NBR)的生产能力、产量与市场现状,分析了其国内市场的走向,从国内NBR生产工艺改进、新产品开发和特性化改性及国外丁腈橡胶信息传输应用和氢化丁腈橡胶聚合材料等几个方面介绍了国内外NBR生产技术的最新进展,并提出了我国NBR市场及技术的发展建议。     

Stereocomplex Crystallization Induced Significant Improvement in Transparency and Stiffness–Toughness Performance of Core-Shell Rubber Nanoparticles Toughened Poly(l-lactide) Blends

Toughening modification of poly(l -lactide) (PLLA) with rubber particles is often realized at the cost of transparency, mechanical strength, and modulus because high rubber loadings are generally required for toughening. In this work, a promising strategy to simultaneously improve the transparency and stiffness–toughness performance of poly(butyl acrylate)-poly(methyl methacrylate) (BAMMA) core-shell rubber nanoparticles toughened PLLA blends by utilizing the stereocomplex (SC) crystallization between PLLA and poly(d -lactide) (PDLA) is devised. The results reveal that the construction of SC crystallites in PLLA matrix via melt-mixing PLLA/BAMMA blends with PDLA can prevent BAMMA nanoparticles from aggregation and promote them to form network-like structure at lower contents. As a result, not only higher toughening efficiency with less rubber contents but also superior transparency is achieved in the PLLA/PDLA/BAMMA blends as compared with the PLLA/BAMMA ones where large aggregated BAMMA clusters are formed. Moreover, the outstanding reinforcement of SC crystallites network for PLLA can impart an enhanced tensile strength and modulus to PLLA/PDLA/BAMMA blends, thus improving the stiffness–toughness performance of PLLA/PDLA/BAMMA blends to a higher degree. This work demonstrates that SC crystallization is a promising solution to solve the contradiction between transparency and mechanical properties and then obtain superior comprehensive performances in rubber toughened PLLA blends.     

型材弯曲模设计

分析了型材在弯曲后其口型失稳起皱的原因,介绍了在型材槽型中填充胶条后在模具的夹持中弯曲成形的工艺,从根本上解决了型材的失稳和起皱,保证了型材的口型尺寸。     

Aging and mechanical properties of NR/BR blends

The mechanical properties and post-thermal aging properties of natural rubber (NR) and polybutadiene rubber (BR) blends at different blending ratios are investigated herein. The experimental results show that both tensile and tear strengths of NR/BR blends increase with increasing NR content. BR has a higher compression stiffness than NR. The deformation of BR is less than that of NR under the same load conditions. With regard to aging properties, both tensile stress and strain of NR/BR blends decrease after prolonged aging. In addition, the stress loss of BR is lower than that of NR, meaning that the aging resistance property of BR is superior to that of NR. Furthermore, accumulated thermal history has shifted the glass transition temperature (T _g) of NR/BR blends toward lower temperatures while the loss tangent (tan δ) value increases with prolonged thermal aging.     

“金属布”硬质复合涂层的微观组织及性能

用Ｘ射线衍射仪、扫描电镜、摩擦磨损试验等，研究了粉末冶金“金属布”及其钢表面改性技术在钢表面制备的ＷＣ－Ｎｉ系合金复合涂层的微观组织和性能。结果表明：该合金涂层中硬质相的体积含量可大于６０％；涂层的微观组织有两类：一种是在粘结相中均匀分布的碳化物与弥散分布的球状粘结相富集区构成的非均匀结构；另一种是碳化物和粘结相都均匀分布的均匀结构。碳化物分布区的硬度大于Ｈｖ１０７６，粘结相富集区的硬度在Ｈｖ９６７～Ｈｖ４５８之间。涂层与钢基体之间有几～几十微米的界面过渡区，形成剪切结合强度大于４００ＭＰａ的冶金结合。复合涂层的耐磨性明显优于调质Ｔ８工具钢。     

艺术铸件冷冻冰模制模方法的研究

艺术铸件是艺术创作和铸造技术的完美组合，铸造工艺是艺术思想的重要保证。从古至今，艺术家和铸造工作者进行了不懈的探索。本文通过试验，分析了冷冻铸造方法用于艺术铸造的一些优势，探讨了用硅橡胶模具制作冰模的工艺方法，并将用此工艺成功制作的一些冰模展示出来。     

橡胶密炼机混炼工艺瞬时功率控制法

橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流理论和混炼过程功率曲线与能量控制法不同，瞬时功率控制法实质上是控制混炼过程中胶料的粘度，确保混炼工艺过程保持最佳状态。因而瞬时功能控制法可监控生产过程，为密炼机混炼工艺的智能控制奠定了基础。     

Polynitroalcohols obtained through nitro aldol reaction between nitro oligomers and C1‐C2‐aldehydes

Polynitroalcohols (PNA) were obtained by A_N‐reaction of nitro oligomers from ground waste rubbers (NO‐GWR) with C₁‐C₂‐aldehydes in presence of organic bases triethanolamine, triethylamine and cyclopropylamine. The A_N‐reaction was studied at temperatures from 30 to 50°C, time 4 h, and NO‐GWR : aldehyde = 1 : 0.5/2.0 mass ratios in the solution. PNA were characterized by elemental analyses, such as ¹H NMR spectra, IR spectroscopy—baseline method with internal standard and thermal analyses. The quantitative functional composition of PNA (%NO₂, %C?O, and %OH groups) was proved to be similar to the composition of PNA obtained from model butadiene–styrene nitro oligomer (BSNO). It was concluded that NO‐GWR could replace NO based on elastomers in nitro aldol reaction with formaldehyde and acetaldehyde. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3241–3250, 2006     

CR／MMA乳液接枝共聚物的研制

用乳液接枝共聚法制备ＣＲ／ＭＭＡ共聚物，讨论ＣＲ乳液、引发剂、接枝温度、ＭＭＡ用量对接枝共聚转化率，接枝ＭＭＡ含量、ＭＭＡ接枝效率和粘接性能的影响，用红外光谱对接枝共聚物进行表征，该共聚物具有较好的粘接性能。     

镍系聚丁二烯橡胶生产技术进展

介绍了近几年国内外镍系顺丁橡胶生产技术的进展情况，内容涉及分子量调节技术、催化剂配置技术、节能降耗的气相聚合、本体聚合工艺及橡胶后处理过程中使用的热泵技术、螺杆挤压工艺，同时也对国内外顺丁橡胶新型防老剂的使用情况及其新品种的开发进行了简要介绍。