Porous elastomeric beads from crosslinked emulsions

The production of porous polymeric particles is attractive for a large number of applications and can be achieved by various techniques. Although numerous production schemes exist for glassy polymers, difficulties arise for soft, rubbery materials that need a chemical crosslinking step, such as elastomers. This is particularly true for poly(dimethylsiloxane) (PDMS), which shows the lowest glass‐transition temperature among the polymers. Recent studies suggest in situ hydrogen bubble formation or vacuum drying of water droplets dispersed in the polymer matrix in order to generate porous PDMS structures. In this work we report early results based on the chemical crosslinking of water in PDMS emulsion droplets in a mechanically stirred thermostated water vessel. This approach is shown to lead to high porosity PDMS beads (ca. 10^?3 m particle diameter) with an open structure whose properties (diameter and porosity) are strongly influenced by the starting composition (solvent, surfactant, and polymer types and ratios), as well as the operating parameters (agitation and temperature). The possible uses of these derived beads are discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 967–971, 2002     

HPVC／PP共混改性研究：Ⅲ低分子量反应性化合物作相容剂

采用低分子量反应性化合物作相容剂，即化学交联体系来改善ＨＰＶＣ／ＰＰ共混物的相容性。考察了在不同共混比下，不同化学交联体系对共混物力学性能的影响，并观察了共混物的微观形态。结果表明，采用低分子量反应性化合物作相容剂，共混物的拉伸强度提高，但冲击强度无改善。分散相尺寸减小，相间粘接得到改善。并比较了３种增容方法的效果，发现ＣＰＥ是ＨＰＶＣ／ＰＰ共混物的最佳相容剂。     

感光乳剂熔化三要素对熔化供料的影响

本文讨论了温度、搅拌和时间三要素对感光乳剂和工艺过程的影响，指出了上述影响的后果和严格过程控制的重要性，提出克服影响的措施。     

Control of the quality of polymer products in continuous reactors: comparison of performance of state estimators with and without updating of parameters

In the paper the control of the product quality in polymerization reactors is analysed in the presence of persistent perturbations (unmodeled disturbances, modeling errors), as met in industrial reactors. The free radical polymerization of methyl-methacrylate in a continuous stirred tank reactor is studied. It is shown that state estimators (Extended Kalman Filters) with constant parameters cannot give offset free performance. Criteria for the selection of a set of parameters to be updated as additional states in the filter and to evaluate their effectiveness in opposing the action of realistic perturbations are given by an analysis of the linearized model of the system. Performance of different types of estimators, including one and two-time scale filters, with and without updating of parameters, is analysed by simulation on the full order process and the predictions made by previous analysis are confirmed. In the most common case of presence of perturbations affecting the energy balance and the concentration of initiator in the reactor, offset free control of the molecular weight of the product can be achieved by means of a filter which is based only on measurements of temperature and conversion and makes an update of two parameters. In the case that also the kinetic model of the polymerization reaction is affected by errors, a two-time scale filter, which makes use also of Molecular Weight values and updates three parameters, becomes necessary to obtain offset free performance.     

Ziegler-Natta烯烃聚合催化剂进展

综述了Ziegler-Natta催化剂在乙烯聚合和丙烯聚合方面的研究开发现状，重点介绍了采用新型二醚化合物作为内给电子体的丙烯聚合催化剂的进展。随着合成树脂向功能化方向发展，开发综合性能优越的新型催化剂及给电子体将是今后的研究方向。     

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.     

Allelopathic effects of giant foxtail on germination and radicle elongation of loblolly pine seed

Water extracts of giant foxtail grass inhibited germination and radicle elongation of loblolly pine seed in a laboratory test. Most of the toxic effects came from extracts of dried foxtail tops, with lesser amounts from fresh tops and roots. Soil texture affected the phytotoxicity of the extracts. Eight chemical compounds known to be phytotoxins inSetaria were identified in extracts of foxtail leaves but could not be found in soil samples under the leaves.     

LLDPE及其催化剂技术进展

综述了线性密度聚乙烯（LLDPE）研究的最进展情况，特别对乙烯原位聚合工艺和后过渡金属镍、钯催化剂进行了详细的叙述，对我国LLDPE的生产提出了自己的看法。     

Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Further characterisation of protease inhibitors from pigeon pea (cajanus cajan (l) millsp) seeds

Cajanus trypsin inhibitor (CTI) and Cajanus trypsin-chymotrypsin inhibitor (CTCI) previously purified from cv TAT-10 were further characterised. The modification of the inhibitors revealed the presence of lysine at the trypsin reactive site in both CTI and CTCI. Modification of tyrosine at the reactive site of CTCI did not abolish chymotrypsin inhibition suggesting the presence of leucine or phenylalanine as reported in other chymotrypsin inhibitors. CTCI did not contain tryptophan. Dissociation constants for the inhibitors with bovine trypsin were in the region of 0.69 nmol (CTCI) and 0.029 nmol (CTI). Although the protease inhibitors lost their inhibitory activity on exposure to 2-mercaptoethanol they remained attached to the enzyme. The inhibitors were not very effective against the protease from Helicoverpa armigera which is a serious field pest of Cajanus. Dissociation constants for the inhibitors with the larval enzyme were in the region of 100 nmol.