催化裂化再生系统设备应力腐蚀开裂成因分析及解决对策

通过对催化裂化装置再生系统设备裂纹断口分析 ,以及对再生烟气的组分、冷凝水酸度及露点等的分析及对设备焊接残余应力测试 ,阐明了设备应力腐蚀开裂发生的原因 ,指出了富氧操作、高露点温度和高应力水平对再生系统设备应力腐蚀的影响作用 ,并重点提出了解决和防止应力腐蚀开裂的一系列有效措施和部分应用情况     

合理选用过剩空气系数的重要性分析

通过分析过剩空气系数过大或过小时加热炉多方面的影响,强调了合理选用过剩空气系数的重要性,并提出了控制措施。     

A study of suppression of vapor explosions by adding inversely soluble polymers

The mechanism of the suppression of vapor explosions by adding inversely soluble polymers in water is studied. Vapor explosion experiments and quench experiment are conducted using a silver test piece. Polymetric solution (polyethylene oxide), of concentrations from 0 to 500 wppm, whose normalized viscosity (by water) varies from 1.00 to 2.00, is used. No vapor explosion is observed in the aqueous polymer solution at a concentration higher than 200 wppm. Quench experiments using the silver test piece submerged in the polymer solution and water are performed in order to examine the stability of film boiling. The suppression of the vapor film collapse is attributed to the precipitation of polyethylene as a gel around the vapor film. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(4): 297–306, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10037     

烷基化原料预加氢工艺应用分析

由于来自催化裂化装置的烷基化原料中所含有的丁二烯在烷基化反应中可生成重质油,使产品干点上升,辛烷值下降,并使酸耗增加.针对这种状况,齐鲁石化公司研究院和胜利炼油厂联合开发了QSH-01烷基化原料预加氢催化剂及其相应的工艺技术,来脱除原料中丁二烯.笔者对该工艺技术及其应用作了阐述,并对该技术的应用前景作出分析.     

Optimizing Thermal Process for Canned White Beans in Water Cascading Retorts

Based on thermal degradation kinetics and heat transfer expressed as the Ball formula method, a simplified approach was used to optimize sterilization processes for thermal softening of white beans (Phaseolus vulgaris, subsp. nanus Metz., variety Manteca de Leon) Constant retort profiles in a still and end-over-end rotary water cascading retort (Barriquand Steriflow) were used. Quality attributes of beans processed at the optimum were evaluated by a trained taste panel and by a tenderometer. Both approaches could distinguish (P<0.01) between attributes of products from optimal rotary and still processes. End-over-end rotation resulted in faster heat penetration and better quality retention of beans. Texture of white beans processed at 4° or 8°C from the optimal temperature could be distinguished (P<0.01) by the sensory panel and by the tenderometer.     

熔纺氨纶厂房中公用工程的应用

介绍了熔纺氨纶厂房对公用工程的要求以及公用工程的工艺流程和设备选型。     

丙烯酸高碳醇酯的合成

介绍了降凝剂中间体丙烯酸高碳醇酯的合成和产品分离提纯方法。考察了合成条件对酯化反应的影响，结果表明，在原料丙烯酸与十八醇摩尔比1．2：1，阻聚剂对苯二酚用量占原料总量1．5％，催化剂对甲苯磺酸用量占原料总量1．5％，反应温度80-86℃，回流反应时间6h条件下，酯化率最高达89％。产品分离提纯方法与传统分离方法比较，所需分离时间短，洗涤用水量少，而产品收率远高于传统分离方法，达95％以上。     

塔河油田超深自喷井流态特征分析

针对塔河油田油藏埋藏深、原油粘度高、井筒热损失大导致自喷困难的实际问题，根据热量传热原理和两相流动理论，建立了自喷井中产出液沿井筒流动与传热的热力学模型。运用该模型计算了塔河油田5口稠油井产出液沿井筒的温度和压力分布。计算结果表明。随着产出液沿井筒的举升。压力逐渐减小，温度不断下降。当温度下降到一定数值时。原油粘度明显增大，即对应原油的拐点温度出现。因此，可以根据流态特征来估计该原油的拐点温度，为选择合适的降粘方法和降粘深度提供了技术指导。     

一种基于小波变换的OTDR事件分析算法的研究

简单分析了用 OTDR卡进行光纤检测的原理 ,根据小波分析检测信号突变点的理论 ,提出了运用小波分析对光纤断点及反射事件准确定位的方法。理论分析和实例计算表明 ,这种方法对 OTDR曲线中反射事件尤其是断点的定位非常准确 ,是一种行之有效的方法     

公伯峡变压器中性点经小电抗接地对线路操作过电压的影响

变压器中性点经小电抗接地可以有效地限制单相短路电流。文章就中性点小电抗的接入对系统的操作过电压的影响进行了研究。通过计算和分析表明：变压器中性点接入小电抗对系统的操作过电压基本不会产生影响。