Phase Stability and Physical Properties of Cubic and Tetragonal ZrO2 in the System ZrO2–Y2O3–Ta2O5

The cubic ( c -ZrO₂) and tetragonal zirconia ( t -ZrO₂) phase stability regions in the system ZrO₂–Y₂O₃–Ta₂O₅ were delineated. The c -ZrO₂ solid solutions are formed with the fluorite structure. The t -ZrO₂ solid solutions having a c/a axial ratio (tetragonality) smaller than 1.0203 display high fracture toughness (5 to 14 MPa · m^1/2), and their instability/transformability to monoclinic zirconia ( m -ZrO₂) increases with increasing tetragonality. On the other hand, the t -ZrO₂ solid solutions stabilized at room temperature with tetragonality greater than 1.0203 have low toughness values (2 to 5 MPa · m^1/2), and their transformability is not related to the tetragonality.     

氟橡胶双酚AF/BPP硫化体系的研究

研究了硫化剂双酚AF、促进剂BPP用量及硫化温度对氟橡胶硫化特性的影响。结果表明：双酚AF和BPP的用量主要影响胶料的交联密度及硫化时间，并对加工性能有一定的影响；硫化温度的提高会缩短焦烧时间和正硫化时间．但有使交联密度下降的趋势。     

In situ preparation and properties of high‐solid‐content and low‐viscosity poly(methyl methacrylate/n‐butyl acrylate/acrylic acid)/poly(styrene/acrylic acid) composite latexes

With monodispersed poly(methyl methacrylate/n‐butyl acrylate/acrylic acid) [P(MMA/BA/AA)] seeded latex with a particle size of 485 nm and a solid content of 50 wt % as a medium, a series of stable P(MMA/BA/AA)/poly(styrene/acrylic acid) composite latexes with a high solid content (70 wt %) and low viscosities (500–1000 mPa · s when the shear rate was 21 s^?1) was prepared in situ via simple two‐step semicontinuous monomer adding technology. The coagulum ratio of polymerization was about 0.05 wt %. The particle size distribution of such latexes was bimodal, in which the large particle was about 589 nm and the small one was about 80 nm. The latexes combined good mechanical properties with good film‐forming properties. Differential scanning calorimetry showed that the corresponding latex film had a two‐phase structure. The morphology of the latex film was characterized with atomic force microscopy and scanning electron microscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1815–1825, 2007     

Dynamic reaction inside co‐rotating twin screw extruder. I. Truck tire model material/polypropylene blends

Waste ground rubber tire (WGRT) is a complex composite containing various elastomers, carbon black, zinc oxide, stearic acid, processing oils, and other curatives. Most of the waste ground rubber tire is composed of mainly natural rubber (NR) and styrene butadiene rubber (SBR) in varying proportions. Blending it with other thermoplastic materials is difficult due to the inherent thermodynamic incompatibility. But, the compatibility can be increased by making the reactive sites in WGRT with suitable chemicals under optimum condition of shearing inside a twin screw extruder and it is said to undergo a dynamic reaction inside the extruder. To understand the mechanism of dynamic reaction process of a rubber/polyolefin blend, the blending of a truck tire model material rubber with polyolefin was first tried before it was applied to waste WGRT material. It was observed that the blends of a truck tire model rubber material and PP thermoplastic are physical mixture of two incompatible polymers in which a continuous plastic phase is largely responsible for the tensile properties. The rubber particles are the dispersed phase. The large particle size and the poor adhesion of these rubber particles are believed to be liable for the poor tensile properties. In case of blends of truck tire model material with isotactic polypropylene the tensile properties are found to be lower than that of its PP‐g‐MA counterpart which can be attributed to the reaction of the MA with the carbon black particles. A schematic representation of the possible interactions has been proposed. The effect of addition of compatibilizers such as SEBS and SEBS‐g‐MA has also been studied. The tensile and TGA studies indicate that the polarity of SEBS and SEBS‐g‐MA induces an increase in the performance characteristics for both types of polyolefins but the intensity of this increase is higher in the PP‐g‐MA based blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 106: 3193–3208, 2007     

Synthesis and characterization of poly(butyl acrylate)/silica and poly(butyl acrylate)/silica/poly(methyl methacrylate) composite particles

Poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core–shell particles embedded with nanometer‐sized silica particles were prepared by emulsion polymerization of butyl acrylate (BA) in the presence of silica particles preabsorbed with 2,2′‐azobis(2‐amidinopropane)dihydrochloride (AIBA) initiator and subsequent MMA emulsion polymerization in the presence of PBA/silica composite particles. The morphologies of the resulting PBA/silica and PBA/silica/PMMA composite particles were characterized, which showed that AIBA could be absorbed effectively onto silica particles when the pH of the dispersion medium was greater than the isoelectric potential point of silica. The critical amount of AIBA added to have stable dispersion of silica particles increased as the pH of the dispersion medium increased. PBA/silica composite particles prepared by in situ emulsion polymerization using silica preabsorbed with AIBA showed higher silica absorption efficiency than did the PBA/silica composite particles prepared by direct mixing of PBA latex and silica dispersion or by emulsion polymerization in which AIBA was added after the mixing of BA and silica. The PBA/silica composite particles exhibited a raspberrylike morphology, with silica particles “adhered” to the surfaces of the PBA particles, whereas the PBA/silica/PMMA composite latex particles exhibited a sandwich morphology, with silica particles mainly at the interface between the PBA core and the PMMA shell. Subsequently, the PBA/silica/PMMA composite latex obtained had a narrow particle size distribution and good dispersion stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3425–3432, 2006     

Copolymerization of trimethylene carbonate and 2,2-dimethyltrimethylene carbonate by rare earth calixarene complexes

Rare earth (Nd, Y, La) p-tert-butylcalix[n]arene (n=4, 6, and 8) complexes alone have been developed to catalyze random and block copolymerizations of trimethylene carbonate (TMC) and 2,2-dimethyltrimethylene carbonate (DTC). The random or block structure and thermal behavior of the copolymers have been characterized by SEC, NMR, DSC, XRD and PLM. Random copolymer with M_w of 14,100 and M_w/M_n of 1.36 was prepared by neodymium p-tert-butylcalix[6]arene complex under the conditions: [TMC+DTC]₀/[Nd]=400, 80 °C, 8 h. The reactivity ratios of TMC and DTC are measured to be r_TMC=4.68 and r_DTC=0.163, respectively. Random copolymerization could be well designed by the feeding ratio to prepare copolymers with controlled T_m and T_g. Only 8% TMC units in the polymer chain destroyed the crystallization of PDTC showing no T_m of the copolymer in the DSC analysis.     

N-异丙基丙烯酰胺凝胶在NaCl水溶液中溶胀行为的预测研究

In this paper, a model is presented to correlate and predict the swelling behavior of hydrogels in aqueous solutions of electrolytes. The model is a combination of VERS-model, “phantom network“ theory and “free-volume“ contribution. The VERS-model is used to calculate Gibbs excess energy; “phantom network“ theory to describe the elastic properties of polymer network, and “free-volume“ contribution to account for additional difference in the size of the species. To test the model, a series of N-isopropylacrylamide based hydrogels are synthesized by free radical polymerization in oxygen-free, deionized water at 25~C under nitrogen atmosphere. Then, the degree of swelling of all investigated gels as well as the partition of the solute between the gel phase and the surrounding coexisting liquid phase are measured in aqueous solution of sodium chloride. The model test demonstrates that the swelling behavior correlated and predicted by the model agrees with the experimental data within the experimental uncertainty. The phase transition appeared in the experiment, and the influences of the total mass fraction of polymerizable materials ξgel as well as the mole fraction of the crosslinking agent YCR on the swelling behavior of IPAAm-gels can also be predicted correctly. All these show the potential of such model for correlation and prediction of the swelling behavior of hydrogels in aqueous solutions of electrolytes.     

Mechanical and dynamical mechanical properties of chloroprene rubber and cellulose II composites

Vulcanized composites of chloroprene rubber (CR) with cellulose II (Cel II) as a filler were investigated. Cel II, obtained by the coagulation of cellulose xanthate, was incorporated in the rubber by the traditional method. The filler content varied from 0 to 30 phr. For comparison purposes, carbon black (CB)–CR composites were also studied. The CB amount varied from 0 to 45 phr. The mechanical and dynamic mechanical properties were determined, and the CR composite containing 20 phr of Cel II showed the best set of properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2425–2430, 2004     

Influence of free volume fraction,inter/intramolecular energy ratio,and chain segment density on the Gibbs-DiMarzio theory of the glass transition

Based upon computer analysis, the Gibbs-DiMarzio (G-DM) theory is evaluated for the case of (a) constant V₀ and (b) constant r where V₀ is the fractional free volume at T_g and r is the ratio of the hole (E₀) to the flex (ε) energy. For each respective case, results are presented in a reduced variables format that indicate the extent to which r and V₀ vary at the transition temperature as a function of the reciprocal degree of polymerization (P^?1). To further account for chemical differences that exist among polymers, an index (n) is introduced that ultimately incorporates the effective number average of chain atom segments (x?) per P?. Using these reduced variables plots, the effects of V₀, r, and n are compared with the T_g data for four well-documented polymers. Although the theory adequately describes the PMMA, PS, and PVC data, for PαMS the fit is doubtful. The analysis demonstrates that, in order to maintain V₀ within the range of 0.015–0.045, r must remain within approximately 1.0–1.1. Moreover, under conditions of either constant V₀ or r, other more flexible polymers require that $\text{n?10}$.