甲烷氧化偶联制乙烯在薄层固定床中的放大实验

研究了甲烷氧化偶联制乙烯反应从３０ｍｌ催化剂装量放大到２００ｍｌ催化剂时，催化剂粒径、床层高度、反应器管形、管径及催化床层底部与加热炉出口位置等对Ｃ２选择性和Ｃ２烃收率的影响。得出在１００ｍｍ的石英反应床中，当催化剂粒度为２０～３０目（１．０～０．６３ｍｍ），床层高度约２５ｍｍ，甲烷与氧混合气由反应管上方进入，催化剂床层底部离反应管加热出口约２０ｍｍ时，在最佳反应条件下，催化剂装量由３０ｍｌ放大到２００ｍｌ的结果基本一致。     

循环荷载作用下饱和黏性土的弹塑性双面模型

基于作者新近提出的一种混合塑性硬化准则和临界状态土力学理论建立了一个三维形式表述的适于饱和黏性土的弹塑性双面模型,此硬化准则是著名的M asing方法在三维应力空间中的推广。该模型的二维形式已采用饱和黏性土样室内动态三轴不排水剪切试验的结果进行了验证并已在另文发表。本文所建的三维弹塑性动本构模型与一个半经验的孔隙水压力增长模式相结合,通过有限元程序ABAQUS*对一个循环荷载作用下的条形基础下部地基土层内的位移、应力分布和超孔隙水压力随时间的变化进行了分析,计算结果表明模型预测的地基土的力学响应是符合实际的。     

多孔粒状铵油炸药在边坡预裂爆破中的应用

通过工程实践，介绍了利用多孔粒状铵油炸药进行边坡预裂爆破的设计原理及施工工艺。该技术能确保预裂爆破质量。简化施工工序，大幅度降低爆破成本。技术经济指标优越。     

The Problem of Estimating the Uncertainty of the Fixed Point Temperature Due to the Presence of Impurities

The main problems in estimating the uncertainty due to the presence of impurities in the material: the absence in the documents of a unique definition of the quantity being measured – the fixed point temperature, the lack of agreed methods of realizing the fixed points and the insufficient justification of the equations used for the estimate, are analyzed. The results of a measurement of the melting point of gallium are presented, which differ in the conditions in which they were realized – with one and two liquid-solid interfaces and different solidification conditions, are presented. The reasons for the considerable difference between the values of the temperatures obtained in these experiments are discussed.     

某热电厂冷却塔地基沉降变形的原因分析

针对某热电厂冷却塔地基沉降变形所出现的问题,该文从勘察资料入手,结合工程设计要求、施工情况以及检测成果找出了造成冷却塔产生不均匀沉降的原因并对此原因进行了对比分析,得出了许多有益的结论。为以后地基的补强加固找出了根据。对类似工程具有借鉴意义。     

Procedure for the evaluation of the accumulation of defects in metallic structural materials under complex elastoplastic loading

Within framework of the continual fracture mechanics, we describe the engineering approach to the assessment of scattered microdamage accumulation kinetics in metallic materials under elastoplastic loading conditions in case of plane stressed state. Automatized experimental stand and the respective investigation technique are discussed. The stand has been developed based on modification of the UMé-10T electromechanic test machine. State-of-the-art computer technologies and microprocessing hardware are incorporated in the stand automation. We present the technique of experimental assessment of damage accumulation kinetics in metallic structural materials under complex elastoplastic loading conditions with account of two different fracture (cleavage and shear) processes, which technique is based on measuring the specific electric resistance of the specimen. __________ Translated from Problemy Prochnosti, No. 1, pp. 128–137, January–February, 2006.     

Flow stress of high density polyethylene and nylon 66 at high rates of strain

Measurement of the flow stress of high density polyethylene (HDPE) and nylon 66 at strain rates of 10³ s^?1 using a split Hopkinson pressure bar technique is discussed. The flow stress at a strain of 10% has been determined for both polymers at 20°C. The intrinsic errors involved in this technique are briefly reviewed. The results indicate that the flow stress of HDPE and nylon 66 were 50MPa and 150MPa, respectively, at strain rates of about 10³s^?1.     

Simulation of runoff and phosphorus transport in a Carpathian catchment,Slovakia

A comprehensive, GIS‐based modelling approach is developed to estimate runoff and phosphorus transport within a watershed at a daily time step. The approach relies on the use of GIS data for deriving major critical model parameters that exhibit distinct spatial variability over the catchment. Surface runoff is calculated by a modified rational method, which depends upon rainfall intensity, soil moisture status, slope, land‐use and soil characteristics. Phosphorus loading is estimated as a function of the runoff volume and the event mean concentration for different land use categories. A diffusive approximation method is used to trace runoff and phosphorus transport to the basin outlet. The modelling approach is tested in the Margecany catchment, Hornad River basin, Slovakia, to simulate runoff, phosphorus loading, and its transport on a daily time scale using data observed between 1995 and 2000. Satisfactory results of the hydrographs and phosphorus concentration at the basin outlet are obtained, though more efforts regarding the phosphorus cycling and its biochemical reactions need to be clarified by further research. Copyright © 2006 John Wiley & Sons, Ltd.     

福州市档案馆消防设计

本文介绍了甲级档案馆消防设计,探讨了在我国目前档案馆建设中如何选择经济适用的灭火系统,并提出了有关设计规范间存在互为矛盾的问题。     

Assumptions and Consequences of Treating Providers in Therapy Studies as Fixed Versus Random Effects: Reply to Crits-Christoph, Tu, and Gallop (2003) and Serlin, Wampold, and Levin (2003).

In their comments on the authors' article (see record 2003-10163-009), R. C. Serlin, B. E. Wampold, and J. R. Levin (see record 2003-10163-011) and P. Crits-Christoph, X. Tu, and R. Gallop (see record 2003-10163-010) took issue with the authors' suggestion to evaluate therapy studies with nested providers with a fixed model approach. In this rejoinder, the authors' comment on Serlin et al's critique by showing that their arguments do not apply, are based on misconceptions about the purpose and nature of statistical inference, or are based on flawed reasoning. The authors also comment on Crits-Christoph et al's critique by showing that the proposed approach is very similar to, but less inclusive than, their own suggestion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)