利用工业废弃物处理电镀含铬废水的研究

本文提出了以工业废弃物───瓦斯灰和烟道灰处理电镀含铬废水研究的新方法。该方法给出了适宜的处理时间、处理剂用量、ＰＨ值和活化剂等工艺条件。对于３００ｍｇ／ｌ以下的含铬废水，采用该法处理其去除率可达９９％以上，出水ＰＨ值和浓度均符合排放标准。     

Astaxanthin Extraction From Shrimp Waste by Lactic Fermentation and Enzymatic Hydrolysis of the Carotenoprotein Complex

ABSTRACT: Natural carotenoids are an alternative to synthetic orange-red pigments. They are present in crustaceans as a protein-pigment complex. In order to extract this highly unstable pigment, crustacean waste must be stabilized; lactic fermentation is a simple and environmentally friendly method to achieve this goal. Shrimp wastes were inoculated with Lactobacillus bacterial cultures. Carotenoids were then extracted with an organic solvent system. Protein-pigment splitting was carried out using a mixture of 4 commercial enzymes; and the protein was separated from the pigment by ultrafiltration. Electrophoretograms showed that the pigment was attached to a 265-kDa protein. Splitting the protein-pigment complex allows studies on pigment absorption, stability and application.     

废塑料裂化生产汽柴油工业化装置研究

报道了废塑料炼油工艺中连续法、间歇法、半连续法等各种方法的特点 ;重点对各工业化流程中存在的问题和解决的方法进行了讨论 ,并提出了一些合理化的建议。     

导汽箱产生长裂纹和大面积凹陷原因分析、处理及预防对策

对硫酸废热锅炉锅筒内自然循环的导汽箱产生长裂纹和大面积凹陷的原因作了分析，提出处理该缺陷的方法，确保了锅炉的安全运行，并提高了蒸汽的品质。     

废旧轮胎的回收利用

针对废旧轮胎不断增长的现状 ,从轮胎的翻修与重复使用 ,胶粉与再生胶的生产等方面 ,介绍了目前废旧轮胎的常用处理方法 ,以加强废旧轮胎处理的研究工作 ,实现环保与资料的回收利用     

卤素置换反应用氯化锌催化剂的再生

研究了用于催化卤素置换反应后的氯化锌催化剂的再生方法。其过程包括：用石灰乳中和，沉淀出氢氧化锌，用氢氧化锌中和氯化锌废液至pH值为5—6，通入氯气氧化氯化锌废液中的有机物，蒸发至必要的浓度。     

高放废液中^147Pm的测定

建立了高放废液中~(147)Pm的测定方法。用HDEHP萃取稀土,再用HDEHP萃淋树脂柱分离AM和稀土。然后用高效液相色谱法将~(147)Pm从Eu、Ce等其它稀土中分离出来,用液体闪烁法测量~(147)Pm的放射性活度。     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry     

ESW激波吹灰器在余热锅炉的应用

介绍了ESW激波吹灰器的工作原理及其在茂名分公司Ⅲ套催化裂化装置余热锅炉的应用情况。应用结果表明，使用ESW激波吹灰器吹灰效果明显，吹灰后余热锅炉排烟温度可下降29℃，过热蒸汽产量增加7t/h，锅炉自产饱和蒸汽产量增加2t/h，有效提高了余热锅炉的传热效率和过热能力，节能效果显著。对应用中出现的一些问题提出了改进建议。     

Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretes

This paper aims at testing the use of mixtures constituted by natural zeolitized products and SiC-bearing industrial wastes (sludge deriving from polishing of porcelain stoneware tiles, hereafter DPM) for the production of lightweight expanded aggregates as constituents of structural and/or thermo-insulating lightweight concretes. Two commercial products have been used as zeolite natural source: Cab70 (Yellow facies of Campanian Ignimbrite) and IZclino (Turkish clinoptilolite-rich epiclastite). Different amounts of a calcareous material (Pozzano limestones — hereafter CP) from the Sorrento peninsula (Naples — Italy) were also added to a Cab70–DPM mixture. All raw materials were characterized by means of mineralogical (XRPD) and chemical (XRF) analyses. All the products and mixtures were tested from a technological point of view by means of fusibility and firing tests in order to evaluate the expanding properties. It was evidenced that the expansion of the mixture was deeply depending on the occurrence of SiC in the industrial waste. The addition of CP (10 wt.%) to the mixtures accounts for an even increased expansion, though this is accompanied by a worsening of the mechanical features of the material.These results along with literature data allowed to select 3 mixtures (70% Cab70–30% DPM, 70% IZclino–30% DPM, 60% Cab70–30% DPM–10% CP) and each of them was used for the preparation of 5 l of lightweight aggregates afterward employed for the manufacture of lightweight concretes. It was remarked that natural zeolitized materials mixed with DPM (30 wt.%) can provide lightweight aggregates with densities ranging between 0.8 and 1.0 g/cm³ suitable for the preparation of structural lightweight concretes. The addition to the mixture of CP (10 wt.%) produces less dense aggregates (0.6–0.7 g/cm³) potentially useful for the manufacture of thermo insulating lightweight concretes.