Molybdenum Oxycarbide and Tungsten Oxycarbide Coatings on Silicon Carbide Fibers

The strength and toughness of fibrous composites depend on the interface properties which control the bonding between the fibers and matrices. One method of controlling the interface involves coating the fiber with an appropriate material. In a previous study, it was found that there is a definite advantage in using low coating temperatures to prevent fibers from degrading. We therefore were interested in a report that Mo₂C could be deposited from Mo(CO)₆ at temperatures as low as 300° to 475°C. Our studies indicated that the material was not Mo₂C, but an oxycarbide, which, with an analogous tungsten oxycarbide coating, was applied to SiC yarns. Both oxycarbides could be converted to the metals by heat-treating in N₂.     

船舶防污涂料的研究与发展

简要介绍船舶防污涂料的发展历程,并对几种新型无毒防污涂料的前景作了展望。     

飞行器电磁窗耐雨蚀复合涂层的制备

研制了电磁窗用耐雨蚀底漆和耐雨蚀面漆，介绍了该配套涂料体系的制备工艺，并列举了其性能指标。讨论了耐雨蚀面漆中聚酯树脂、多元醇和颜料对其性能的影响，施工工艺对耐雨蚀涂层与底涂层之间配套性能的影响。     

The structure of model coatings: latex-bound plastic pigment coatings

The immobilization and consolidation of model coatings based on monodisperse polystyrene (plastic pigment) and S/B latexes of known particle sizes were studied in terms of their packing volumes and the extent of latex shrinkage, which was found to increase with increasing pigment volume up to the critical pigment volume concentration (CPVC). The maximum latex shrinkage was estimated from the CPVC. Then, the porosity of model coatings was calculated based on three proposed latex shrinkage models: maximum, minimum, and linearly decreasing latex shrinkage. The number of pores and the average equivalent spherical pore diameters were subsequently calculated. The opacity and gloss of model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. The CPVC values determined by the opacity, gloss, and porosity versus PVC relationships, respectively, agreed very well with each other. The CPVCs determined by the opacity and porosity versus PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the linearly decreasing value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. Additionally, a minimum crack-free temperature (MCFT) of latex-bound coatings was proposed to better predict the behaviors of latexes as pigment binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.     

负离子乳胶漆的研究及应用进展

介绍了空气中负离子的作用、负离子乳胶漆释放负离子的原理和国内外负离子乳胶漆产品的研发进展。     

氮掺杂纳米TiO_2改性涂料及其抗菌性能

将自制的氮掺杂锐钛矿型纳米二氧化钛光催化剂作为功能性组分,加入耐光催化氧化的硅丙乳胶涂料中,制备出一种新型光催化功能性建筑涂料,实现了可见光光催化效应。使用紫外-可见光吸收光谱研究该功能性涂料对紫外线的吸收能力;采用菌落计数法研究该涂料在可见光照射下对金黄色葡萄球菌的杀灭性能。同时分析了纳米粉体种类、引入量及方式对涂料紫外线的吸收性能和抗菌性能的影响。     

抗菌灭病毒涂料的研制及表征

在评价多种杀菌剂的抗病毒性能的基础上,筛选出杀菌和抗病毒性能均优异的功能助剂三氯苯基马来酰亚胺,用以研制成一种杀菌灭病毒功能内墙涂料。     

UV涂料在户外的应用

本文简述了辐射固化技术的发展历史，回顾了我国辐射固化涂料的发展状况，介绍了户外用UV涂料的特点、制备及国外最新进展。     

氟丙防腐涂料的耐候性研究

运用冷拼法制备氟丙树脂并配制了氟丙防腐涂料,比较研究了其与氟碳树脂涂料、含羟基丙烯酸树脂涂料性能及耐老化性能。结果表明:氟丙涂料比氟碳涂料具有更高的光泽度,比丙烯酸涂料有更好的耐候性,树脂含氟量与涂料的光泽度和失光率之间存在线性对应关系,含氟量增加,光泽度和失光率均线性降低。     

皮革涂料用丙烯酸酯核-壳乳液的研制

采用种子乳液聚合法，以交联型软性聚合物为核，交联型硬性高聚物为壳，合成了具有优异耐寒性及高温抗回粘性聚合物。讨论了乳化剂种类及应用、核／壳比等对聚合物性能的影响。