磷酸三辛酯生产及在双氧水中的应用

磷酸三辛酯（TrioctylPhosphate），又名磷酸三异辛酯，学名磷酸三（２—乙基己基）酯，简称TOP。磷酸三辛酯是１种既有阻燃性又有耐寒性的特种增塑剂，其低温性优于己二酸酯类，耐水性优良，挥发性低，与PVC树脂配合具有优异的凝胶作用，同时赋予制品优良的机械性能、紫外光稳定性、抗老化性、阻燃性及抑菌作用。主要应用于军用PVC制品、涂料、合成橡胶及纤维中，还可以用于双氧水（H２O２）的工作溶剂、润滑油添加剂、贵重金属萃取剂等。目前，我国主要的生产单位有杭州大自然有机化工实业有限公司、无锡太湖化工溶剂厂、杭州黎明聚…     

Nucleation Mechanism for Bainite

Based on the experimental results that solute-depleted zone was observed in Cu-28Zn-4AI (mass fraction) at 523 K, AG is calculated as a positive according to the thermodynamic criteria for the spinodal decomposition of a ternary systems. So, the solute-depleted zone cannot be formed by spinodal decomposition. Dislocation density required by the formation of solute-depleted zone is estimated greater than 7.89×109 cm-2, according to the segregation of solute atoms around dislocations, which is not consistent with the practical situation for the alloy at 523 K. Associated with the internal friction experimental fact that internal friction peaks appear within the incubation for bainitic transformation in Cu-Zn-AI alloy, the equilibrium temperature, TO, is evaluated as 433 K for solute-depleted Cu-25Zn-3.4AI, which is lower than the experimental temperature 523 K. Thus, nucleation by shear mechanism is impossible in this circumstance. Therefore, it is concluded that, like bainite in steels and Ag-Cd, bainite in     

汽车稳定杆组织与疲劳性能研究

对28Mn6钢制造的汽车稳定杆，分别采用整体感应加热－整体淬火、连续感应加热淬火两种不同热处理工艺，并进行了台架疲劳寿命试验，采用光学显微镜和扫描电镜，分析了经两种不同热处理工艺处理的稳定杆的金相组织及其早期疲劳断裂的断口形貌，提出，获得细小的高韧性索氏体组织是保证良好疲劳寿命的关键，稳定杆喷丸表面质量，游离铁素体也是影响疲劳性能的重要因素。     

余热热处理对热变形低铬半钢耐磨性的影响

通过冲击磨损试验，测试了变形低铬半钢耐磨性，并对其磨损面特征进行了分析。结果表明：该钢变形后经适当的余热热处理可获得较高的耐磨性能。     

含铌钢板坯连铸二冷目标温度及配水

讨论连铸生产过程中铸坯温度对含Nb钢高温塑性的影响，在此基础上确定铸坯在二冷段各区的表面目标温度，介绍计算二冷配水的方法，并讨论中间罐钢水温度对二冷配水的影响。     

45钢表面超音速电弧喷涂Ti-Al涂层的组织与性能研究

采用自行开发研制的超音速电弧喷设备，在45钢表面制成了钛铝合金复合涂层。并利用金相显微镜、X射线衍射仪、扫描电镜、电子探针，对涂层的成分、相结构、显微组织及其结合强度、显微硬度进行了研究。结果表明，利用超音速电弧喷涂设备，可以在45钢表面形成 度高、孔隙率低，结合强度较好和硬度高的Ti-Al合金涂层。     

Quantitative analysis of Ni effect on CCT diagrams of novel air-cooled bainite steels using artificial neural network models

The quantitative effect of Ni content on continuous cooling transformation （CCT） diagrams of novel air-cooled bainite steels was analyzed using artificial neural network models. The results showed that Ni may retard the high- and medium-temperature transformation and martensite transformation. The results conform to the materials science theories.     

16MnL钢板冷弯性能研究

1概述 16MnL钢是用于汽车车架的专用钢,成分与Q345差别不太大,P含量比Q345低0.005%,S含量低0.01%,Mn含量相同.     

转炉磷的终点动态控制

介绍了转炉吹炼过程中同时脱碳和脱磷的终点动态控制方法，控制用数学模型及应用效果。