Molybdate and tungstate as corrosion inhibitors for cold rolling steel in hydrochloric acid solution

The inhibition effects of molybdate and tungstate on the corrosion of cold rolling steel (CRS) in hydrochloric acid solution (0.1-0.5 M) were investigated by weight loss and electrochemistry methods. The results reveal that both molybdate and tungstate are very good inhibitors with little concentration. The adsorption of inhibitors on the CRS surface basically obeys the Langmuir adsorption isotherm equation. The effect of temperature on the corrosion behavior of CRS was also studied at 25 °C and 35 °C, the thermodynamic parameters such as adsorption heat (ΔH⁰) and adsorption free energy (ΔG⁰) were calculated. In the same conditions, a comparative study of corrosion inhibition of molybdate and tungstate indicated that molybdate was the better inhibitor in 0.1 M HCl. However, the value of percentage inhibition efficiency (IE) was dependent on the concentration of inhibitors in 0.2-0.5 M HCl. It seemed that molybdate did not have the strong inhibitive effect compared to tungstate with relatively small concentration of inhibitors, but molybdate was a better inhibitor over a wide concentration range of inhibitors. A kinetic study of cold rolling steel in uninhibited and inhibited acid was also discussed. Various parameters such as rate constant k and the kinetic parameter B were calculated for the reactions of corrosion. Polarization curves showed that both molybdate and tungstate are mixed-type inhibitors in acidic media.     

10B21含硼冷镦钢轧后结疤成因分析及工艺改进

通过实验及热力学分析得出,轧制10B21钢结疤形成主要原因为钢中平均N含量为127×10^-6,导致铸坯角部冷却过程中在奥氏体晶界析出细小的BN和AlN夹杂,增加了铸坯的裂纹敏感性,形成铸坯裂纹。通过提高铁水比≥920 kg/t、转炉终点C-T-P(碳-温度-磷)命中率≥85%、出钢口圆流出钢以及LF加热次数≤3次,时间≤25 min等措施可将钢中的氮含量稳定控制在≤50×10^-6,有效避免10B21钢轧后盘条结疤,提高成材率,降低成本。     

轴对称与非轴对称截面冷拔棒材表面残余应力的比较

用物理测定法测定了矩形截面冷技型钢表面的残余应力，并与圆形截面冷拔型钢表面残余应力进行比较。提出用高温近火方法来改善矩形截面冷拔型钢表面残余应力的工艺探索。     

硬质合金冷挤压凹模的热处理强化

本文叙述了ＷＣ－Ｃｏ硬质合金特别是ＹＧ２５牌号硬质合金的渗硼淬火热处理强化工艺和不同钴含量的合金的强化处理效果以及强化处理的合金应用效果，并对其强化机理进行了讨论。     

Controlling the Cold Roll Forming Design Process

The cold roll forming process requires successive forming profiles to be determined and an appropriate number of profiled roll sets to be designed for the product to be rolled. This paper examines the design process and how one company has put in place a design-production control system that allows designs to be ranked in terms of quality and efficiency. In addition, consideration is given to the proportion of time given to each design task and how non-creative design activities can be automated.     

钛合金冷坩埚电磁约束铸造工艺研究

针对液态下化学性质相对活泼的钛合金,采用冷坩埚技术对电磁约束铸造工艺过程进行了试验研究,考察了工艺条件对成形坯件表面质量和内部组织的影响.结果表明:试样抽拉速度变化对表面质量和宏观组织的影响明显,加热功率虽然对组织变化影响不大,但对表面质量影响较为显著.通过优化工艺,可以获得既有较光滑铸造表面又具有一次定向凝固组织的钛合金铸件.讨论了铸造过程裂纹和组织缺陷的形成机理,获得到了表面光滑无裂纹,宏观组织为柱状晶的钛合金大尺寸圆坯.     

Viscosity of compressed cold lake bitumen

Viscosity data over a temperature range of 37-115°C and a pressure range of 0-10 MPa gauge are presented for a Cold Lake bitumen sample. These data show that the compression of Cold Lake bitumen results in a significant increase in its viscosity. Results are compared with those from a similar study on an Athabasca bitumen sample. Also presented are two correlations for the effects of pressure and temperature on the viscosity of Cold Lake bitumen.     

复合型高分子自限温发热材料及元器件在汽车冷启动方面的应用

采用HDPE／CB复合型高分子自限温发热材料制备了适于在汽车上使用的自限温加热带、发热管及相应的加热器，通过实验室模拟试验，研究了加热器的电热特性。在冬季的柴油车冷启动试验表明，组合加热装置对柴油车的冷启动及正常运行非常奏效，所研制的复合型高分子自限温发热材料及元器件用于汽车领域是可行的。     

Optimal Ozone Production From Air

In this paper, another achieved example of Lunt's theory of chemical reactions in electrical discharges is emphasized. From an economic viewpoint, it is shown for a given mean value of the plasma temperature that the ozone yield of an air-fed cold plasma reactor presents an optimal value depending on the reduced electrical field, as expected from theoretical developments.     

Dewatering behaviour of water treatment sludges associated with contaminated site remediation in Antarctica

Sludge reduction and dewatering is an important aspect of water and waste water treatment. This is especially true in the case of Australia's Antarctic contaminated site remediation program, where the reduction in volume of wastes to be returned to Australia can lead to significant transport and handling cost savings. The dewatering characterisation of water treatment sludges from an Antarctic contaminated site was conducted using a theory of suspension dewatering developed by Buscall, Landman and White. This theory uses fundamental material properties of compressibility and permeability to determine the diffusivity of a suspension. Diffusivity is a useful property that can be used to directly compare the dewaterability of various sludges. In this investigation, several water treatment sludges were collected and characterised in the field to determine the impact of temperature and additives on compressibility, permeability and diffusivity. The Antarctic sludges were found to be less compressible and less permeable than materials such as mineral suspensions and alum water treatment sludges. Compressibility was found to decrease with the addition of powdered coagulation aids such as bentonite and chitosan.