On the mechanical behavior of aluminum alloys reinforced by long or short alumina fibers or SiC whiskers

This study was initiated to examine the dispersion of longitudinal and transverse waves in metal matrix composites in order to obtain the dynamic elastic modulus and to evaluate various models for predicting the composite's macroscopic elastic constants from the properties of its constituents. The materials chosen for this investigation were alumina continuous fibers on the one hand and alumina and SiC short fibers on the other hand, all embedded in an aluminum alloy matrix. In addition, some indications have been obtained experimentally for the acoustoelastic effect in the composite.     

Heterogeneous Plantinum Nucleation and Crystallization of a Heavy-Metal Fluoride Glass

The effect of controlled heterogeneous nucleation by platinum on the crystallization of a ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) glass was studied. Various levels of platinum were incorporated into this glass by a combination of PtCl₂-doping and melting-atmosphere variation. The effect of doping levels and melting conditions on the incorporation of platinum and the subsequent nucleation of crystals was studied by optical microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), and X-ray diffraction. Increased platinum in the glass resulted in an increased number of nucleation sites for the growth of β-ZrF₄-BaF₂ crystals. Analysis of isothermal and ramp-rate DSC measurements indicated that the crystallization of this glass changed from surface controlled to bulk controlled with an increased number of nuclei. This was confirmed by optical microscopy. In addition, Avrami analysis of the isothermal crystallization data gave an accurate approximation of the number of nuclei in the glass.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

磷酸盐玻璃中Er~(3+)离子的光跃迁和激光作用

给出了Li-Al磷酸盐玻璃中Er~(3+)离子发射特性(Ar、σ_ρ、β、τ_γ)的计算结果。报道了Cr~(3+)→Yb~(3+)→Er~(3+)的一种有效能量转移,并获得了室温下3J1.54μm波长的激光输出。     

水工钢闸门聚酯玻璃钢复合防腐处理方法

水环境的恶化，使水工钢闸门腐蚀加重，传统的防腐工艺保护效果下降。聚酯玻璃钢复合防腐层的水工钢闸门防腐工艺具有使用设备少，工艺简单、防腐效果好、成本低等优点，适用于在各种水环境中作各种形式的水工钢闸门防腐，效果良好。该文结合江苏省淮海农场工程施工经验，提出了水工钢闸门聚酯玻璃钢复合防腐层结构设计、施工工艺及质量标难，为今后的推广应用提供了一定的参考依据。     

高温稀土永磁Sm2(Co,Cu,Fe,Zr)17 的制备和性能

制备了高温稀土永磁材料Sm(Coba1Fe0．26Cu0．05Zr0．026)7．0，研究了磁性能与工艺条件的关系．结果表明：提高烧结温度可使材料的Br和(BH)max增大，但是使Hci降低；适当提高真空预烧温度，可使材料在较低烧结温度下致密化，具有较高的Hci和(BH)max和温度稳定性．真空预烧温度过高使性能的急剧降低，其主要原因是Sm的析出．在最佳工艺条件下材料的磁性能参数分别为：Br1．08T3Hci2286kA／m，Hcb932kA／m，(BH)max220．8kJ／m^3；β20-200℃为-0．19％／℃．     

中高温熔点金属材料固–液相变点导热系数测量

设计了一种中、高温熔点金属材料固-液相变点温度附近热物性动态测算方法,并与计算机实时数据采集和测控技术结合起来,研制了相应的动态测试仪。通过实验测定相界面的移动速率与相变导热反问题的数值计算相结合的办法来确定被测材料的热物性。分别对相变室、炉体、相界面探测器、温度在线检测与控制系统、测试过程进行了设计,对测试系统的测量误差进行了定量分析,发现采用此方法测试的系统误差不超过3%。用已知热物性的锌、铝金属对此方法进行了检定,得到了较为满意的测试结果。     

Acoustic study of nano-crystal embedded PbO-P2O5 glass

Nano-crystal embedded PbO-P₂O₅ glass has been prepared and characterized by XRD and TEM measurements. The ultrasonic velocity and attenuation measured within the temperature range 80–300 K show significant structure and interesting feature with the presence of nano-crystalline region. The glass samples were prepared by melt-quench method and nano-crystals of different sizes were produced by heat treatment of the glasses for different durations of heating. All the processes were carried out at or above glass transition temperature. A theoretical model that takes account of the effects of thermally activated relaxation, anharmonicity as well as microscopic elastic inhomogeneities arising out of fluctuations has been successfully applied to interpret the variation of ultrasonic velocity and attenuation data. An interesting outcome of this application has been to propose a method for the determination of the size of nano-crystals from the ultrasonic attenuation data.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.