一个矢量形式的双圆弧插值算法

本文在分析数控插补最常用的双圆弧插值算法特点的基础上，将以局部坐标系中的三角运算为核心的传统双圆弧插值算法，改造成为以整体坐标系中的线性运算为核心的矢量形式的双圆弧插值算法，从而减少了计算的复杂性和程序的复杂性，提高了效率和可靠性。     

Disparity field and depth map coding for multiview 3D image generation

In the present paper techniques are examined for the coding of the depth map and disparity fields for stereo or multiview image communication applications. It is assumed that both the left and right channels of the multiview image sequence are coded using block- or object-based methods. A dynamic programming algorithm is used to estimate a disparity field between each stereo image pair. Depth is then estimated and occlusions are optionally detected, based on the estimated disparity fields. Spatial interpolation techniques are examined based on the disparity/depth information and the detection of occluded regions using either stereoscopic or trinocular camera configurations. It is seen that the presence of a third camera at the transmitter site improves the estimation of disparities, the detection of occlusions and the accuracy of the resulting spatial interpolation at the receiver. Various disparity field and depth map coding techniques are then proposed and evaluated, with emphasis given to the quality of the resulting intermediate images at the receiver site. Block-based and wireframe modeling techniques are examined for the coding of isolated depth or disparity map information. Further, 2D and 3D motion compensation techniques are evaluated for the coding of sequences of depth or disparity maps. The motion fields needed may be available as a byproduct of block-based or object-based coding of the intensity images. Experimental results are given for the evaluation of the performance of the proposed coding and spatial interpolation methods.     

An 8-bit, 200 MSPS Folding and Interpolating ADC

An 8-bit, 200 MSPS folding and interpolating analog-to-digitalconverter, ADC, has been implemented in a 1.2 µmBiCMOS-process. It achieves 7.5 effective bits with a power dissipationof 575mW. The active area is 4mm². The implementationand measured results are presented. A simple analytical modelfor the interpolation-induced nonlinearity in a folding and interpolatingADC using sinusoidal folding is presented. The bowing of thereference ladder due to interaction with the input stages isanalyzed, and analytical models are derived.     

OSCILLATION AMPLITUDE OF THE FREE END OF A FLEXIBLY MOUNTED RIGID CYLINDER IN TRIANGLE ARRANGEMENT

In this paper,the oscillation amplitude of the free end of a group of threecylinders are studied.The three cylinders are erected at the vertices of an equilateral trian-gle,and three arrangements are made in this study.One of the three cylinders is served asa working cylinder which is mounted by a flexible cantilever and two accelerometers areattached on the free end in two directions.The results of the three-cylinder arrangementare compared with those of two cylinders in tandem/side-by-side arrangement in the samecondition.The experimental results show that the rear cylinder of a group of three cylin-ders is affected more seriously than that of the corresponding two cylinders in the contrastarrangement.The main direction of oscillation is changed.The transversal oscillation isstronger than the longitudinal oscillation in the three-cylinder arrangement.On the con-trary,the transversal oscillation is much weaker than the longitudinal oscillation in two-cylinder arrangement.The largest transversal oscillat     

高速微粒携基因侵入植物细胞的速度条件

本文围绕基因枪技术中用高速微粒向植物细胞中导入外源基因的速度条件，分析了其中的三个动力学过程：发射宏弹、加速微弹、侵入细胞．提出了气动撞击发射式基因枪中弹簧刚度应满足的条件；得到了一种用理论分析与试验测试相结合确定微弹出射速度的方法；找到了微弹侵入植物细胞的最小速度条件。从而为基因枪的设计提供了理论依据。     

凸轮机构基圆半径的确定方法及其分析

基圆半径的确定方法，除了用图解法和试算法外，还可用解析法和图解分析法求解。４种方法各有优缺点，设计时要根据具体情况选择。     

外循环型鼓泡式反应器气含率及循环液速率

对直径２８０ｍｍ、扩大直径５００ｍｍ、外循环管直径６５ｍｍ、总高２９００ｍｍ的外循环型鼓泡式反应器，在气体空塔线速Ｕｇ为０．０４－０．５５ｍ／ｓ时，用静压差法和脉冲示踪法测定了不同部位的气含率Ｅｇ，Ｅｐｇ和循环液速率ｕ１，并获得了它们的关联式：对反应段，Ｅｇ＝０．４５５６Ｕ＾０．３１９８ｇ〔Ｕｇ／（Ｕｇ＋Ｕ１）〕＾０．７３９６；对反应器扩大段，Ｅｕｇ＝０．９３８９Ｕ＾０．４４３１ｕｇ；对循环管，Ｅ     

快速评定砂浆配方对钢筋腐蚀的影响

用电化学方法测定砂浆试件中钢筋的极化电阻，并测定了砂浆的孔隙率，结果发现:砂浆的孔隙率、孔径分布与钢筋极化电阻大小有良好的对应关系。电化学方法能可靠、快速测定砂浆配合比、添加剂对钢筋腐蚀速度的影响。     

角调谐飞秒同步泵浦KTP红外光参量振荡器

用平均输出功率为１．１Ｗ，脉宽为９０ｆｓ的商用再生锁模Ｔｉ：Ｓａｐｐｈｉｒｅ激光器作为泵浦源，用ＫＴＰ作为非线性光学介质，制成一台同步泵浦飞秒光学参量振荡器。其输出调谐范围为１．０４μｍ至１．２６μｍ，平均输出功率在１００ｍｗ左右，脉宽仅约１００ｆｓ。     

填料萃取塔液泛速度的计算

介绍了三种有代表性的填料萃取塔的液泛速度计算公式，并通过它们用于三种典型的液-液实验体系和两种不同填料的计算结果的比较，对这些公式的适用范围进行了讨论。