蜡晶改进剂对润滑油馏分中蜡组分结晶控制作用的研究

抚顺石油一厂通过大量试验和溶剂脱蜡装置的连续生产证明:加工减二线,套管易上压,滤机上蜡饼泡松易堆蜡,应选用合适的改进剂以控制蜡晶生成树枝状;减四、五线重馏分蜡晶细密,套管不易上压,滤机易失效,应选用和适当加入合适的改进剂以增大聚集状晶体粒度;减三线蜡晶粒度大,为套管上压周期较长,滤机上蜡饼通透性好,滤速快,可根据需要决定是否使用改进剂。提出了针对不同润滑油馏分中不同蜡晶型选用合适的蜡晶改进剂可以相应解决不同馏分的生产难点,提高处理能力,改善产品质量。     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

熔融 NaCl-(Na,K)_2SO_4引起的 Fe-Cr 合金的热腐蚀

本文采用电化学方法研究了 Fe-Cr 合金在800℃、熔融 NaCl-(Na,K)_2SO_4中的腐蚀行为,并对腐蚀产物进行了观察和分析。结果表明,提高合金 Cr 含量可以改善合金耐蚀性能。氧化-硫化是Fe5Cr、Fe10Cr 合金腐蚀破坏的主要方式;氧化膜的熔融反应是 Fe20Cr、Fe25Cr 合金加速腐蚀的主要原因。同时,氧化膜的机械破裂也加速了合金的腐蚀。     

二硫代磷酸硫化氧钼与硫,磷添加剂的复配特性研究

研究了二烷基二硫代磷酸硫化氧钼（ＭｏＤＴＰ）摩擦改进剂及其与硫、磷、硫－磷型添加剂复合的抗磨减摩性能。试验表明，经过适当复配后，这类合活性元素的添加剂对ＭｏＤＴＰ的抗磨减摩性能均有增效作用，同一类型添加剂的活性愈高，增效作用愈显著。同时利用扫描电镜和Ｘ－射线能谱仪进行摩擦副表面膜的形貌照相及元素分析，对复合作用的机理进行了初步探讨。     

Preparation and characterization of metal-complex imprinted PVDF hollow fiber membranes

Using nickel-2,2′-dipyridyl complex as a template, N-vinyl-2-pyrrolidone as the metal coordination functional monomer, and ethylene glycol dimethacrylate as the crosslinker, polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membrane as the supported membrane, metal complex imprinted polymeric membranes were prepared. The association constant of template-monomer interaction in the prepolymerization solution was estimated to be 4.38 × 10⁴ (L/mol)² by spectrophotometric titration analysis. The attenuated total reflection Fourier transform infrared spectroscopy and scanning electron micrograph characterization indicated that the surface of the support PVDF membrane was completely coated by the imprinted polymer layer after modification. The imprinted membranes exhibited the selective permeability for the template in certain nickel acetate solution. The molecularly imprinted membranes gave higher permeation separation factors at about pH 6, whereas increasing pressure would lower the separation ability. The effects of ion concentration, cations and counterions, ligand selectivity, pH, and trans-membrane pressure were investigated and the permeation performances of the imprinted membranes could be regarded as facilitated transport mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and redox and electrochromic behaviors of poly(3-n-octyloxythiophene)

Poly(3-n-octyloxythiophene), a conjugated polymer, which possessed solubility in common organic solvents, was synthesized by electrochemical polymerization in the presence of lithium perchlorate as the supporting electrolyte and sodium dodecyl sulfate as the surfactant in an aqueous medium. Characterizations of the intermediate, monomer, and polymer were performed by NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, and gel permeation chromatography. The process of electrochemical polymerization and the electrochemical redox behaviors were investigated by cyclic voltammetry and the potentiostatic method. A poly(3-n-octyloxythiophene) film that was deposited on a platinum electrode was found to exhibit electrochromic behaviors, and it switched electrochemically between blue–green oxidized and dark red reduced states. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hybrid numerical scheme for time-evolving wave fields

Many problems in geophysics, acoustics, elasticity theory, cancer treatment, food process control and electrodynamics involve study of wave field synthesis (WFS) in some form or another. In the present work, modelling of wave propagation phenomena is studied as a static problem, using finite element method and treating time as an additional spatial dimension. In particular, WFS problems are analysed using discrete methods. It is shown that a fully finite element-based scheme is very natural and effective method for the solution of such problems. Distributed WFS in the context of two-dimensional problems is outlined and incorporation of any geometric or material non-linearities is shown to be straightforward. This has significant implications for problems in geophysics or biological media, where material inhomogeneities are quite prevalent. Numerical results are presented for several problems referring to media with material inhomogeneities and predefined absorption profiles. The method can be extended to three-dimensional problems involving anisotropic media properties in a relatively straightforward manner. Copyright © 2006 John Wiley & Sons, Ltd.     

A basic program for calculating subsurface water temperatures using chemical geothermometers-implication to geothermal reservoir estimation

GEOTHERM is a computer program written in BASIC language to estimate geothermal reservoir temperature using the well-known chemical gèothermometers. The empirical equations used in the program were obtained from the literature. Three different chemical geothermometers are included in the program: Na-K, Na-K-Ca, and silica geothermometers; this gives the user the opportunity not only to select the most reliable geothermometer in estimating subsurface temperature, but also to select the type of geothermometer according to available data. A sample input file of geothermal waters obtained from Iceland has been tested, so as to show the applicability and usefulness of the program.     

The application of the methodology for secure cyber–physical systems design to improve the semi-natural model of the railway infrastructure

The paper suggests a new methodology for secure cyber–physical systems design. The proposed methodology consists of two main cycles. The main goal of the first cycle is in design of the system model, while the second one is about development of the system prototype. The key idea of the methodology is in providing of the most rational solutions that are improving the security of cyber–physical systems. Such solutions are called alternatives and built according to functional requirements and non-functional limitations to the system. Each cycle of the methodology consists of the verification process and seven stages that are associated with the used cyber–physical system model. The objective of the verification process is in checking of constructed models and prototypes in terms of their correctness and compatibility. The model represents cyber–physical systems as sets of building blocks with network between them, takes elements internal structure into account and allows direct and reverse transformations. The novelty of the suggested methodology is in the combination of design, development and verification techniques within a single approach. To provide an example of the design methodology application, in this paper it is used to improve the semi-natural model of the railway infrastructure.     

Ontological reasoning in the design space exploration of advanced cyber–physical systems

Cyber–physical systems are becoming increasingly complex. In these advanced systems, the different engineering domains involved in the design process become more and more intertwined. Therefore, a traditional (sequential) design process becomes inefficient in finding good design options. Instead, an integrated approach is needed where parameters in multiple different engineering domains can be chosen, evaluated, and optimized to achieve a good overall solution. However, in such an approach, the combined design space becomes vast. As such, methods are needed to mitigate this problem.In this paper, we show a method for systematically capturing and updating domain knowledge in the context of a co-design process involving different engineering domains, i.e. control and embedded. We rely on ontologies to reason about the relationships between parameters in the different domains. This allows us to derive a stepwise design space exploration workflow where this domain knowledge is used to quickly reduce the design space to a subset of likely good candidates. We illustrate our approach by applying it to the design space exploration process for an advanced electric motor control system and its deployment on embedded hardware.