Green antimicrobial coating based on quaternised chitosan/organic montmorillonite/Ag NPs nanocomposites

This work is aimed at developing a green antimicrobial coating. First, a green antimicrobial agent, quaternised chitosan (QCS)/organic montmorillonite (OMMT)/silver nanoparticles (Ag NPs) (QOMA) nanocomposite was fabricated through an environmental-friendly one-step approach. Morphological and structural characteristics of QOMA were investigated, and good antimicrobial activity was proved. QOMA was then incorporated into powder coating formulations to form a homogeneous coating on steel plates, which was studied by scanning electron images. Besides, the physical and mechanical properties as well as the antimicrobial performances of the coatings were discussed. The results showed that the addition of QOMA imparted good antimicrobial capacity to the powder coating, but did not affect its physical and mechanical properties. The coatings were able to effectively inactivate Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus aureus) and fungi (Aspergillus niger, Penicillium funiculosum, Chaetomium globasum, Paecilomyces varioti, Asp. terreus and Aureobasidium pullulans). Our findings demonstrate the possibilities of green antimicrobial coating containing QOMA for practical applications in medical devices, domestic appliances and other solid surfaces concerning bacterial infection and contamination.     

Preparation of a magnetically recoverable nanocatalyst via cobalt-doped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and its application in the hydrogenation of nitroarenes

In this paper, we describe the facile and effective preparation of a series of cobalt-doped Fe₃O₄ nanocatalysts via chemical coprecipitation in an aqueous solution. The catalyst allowed the hydrogenation of chloronitrobenzenes to chloroanilines (CAs) to proceed at low temperatures in absolute water and at atmospheric pressure, resulting in approximately 100% yield and selectivity. Several factors that influence the yield of CAs were investigated. The results showed that the suitable dosage of the catalyst was ~10 mol.% of the substrate, and the optimal reaction time, reaction temperature, and reaction pressure were 20 min, 80 °C, and atmospheric pressure, respectively. Under the optimal reaction conditions, the CA yield was as high as 98.4%, and the nitro reduction rate reached 100%, which indicates the excellent selectivity of the homemade catalyst. This process also overcomes the environmental pollution harms associated with the traditional process.

Open image in new window

     

Fluorescent silicon nanoparticle-based gene carriers featuring strong photostability and feeble cytotoxicity

Safe fluorescent gene-transfection vectors are in great demand for basic biological applications and for gene-therapy research. Here, we introduce a new type of luminescent silicon nanoparticle (SiNP)-based gene carrier suitable for determining the intracellular fate of the gene vehicle in a long-term and real-time manner. The presented SiNP-based nanocarriers simultaneously feature strong and stable fluorescence, high DNA-loading capacity and gene-transfection efficiency, as well as favorable biocompatibility. Taking advantage of these unique benefits, we were able to readily observe the behavior of the gene carriers in live cells (e.g. cellular uptake, intracellular trafficking, and endosomal escape) in a long-term and real-time manner. The results demonstrate the potential usability of these fluorescent SiNP-based gene vectors as powerful tools in the field of gene therapy, and provide invaluable information for understanding the intracellular behavior of gene carriers.

Open image in new window

     

Bromide ion mediated modification to digestive ripening process: Preparation of ultra-small Pd,Pt, Rh and Ru nanoparticles

Nanoparticles of catalytically important transition metals, such as Pd, Pt, Rh, and Ru have been prepared by the well-known “digestive ripening” (DR) and “modified digestive ripening” (mDR) methods. In the traditional DR process, a polydisperse colloidal dispersion is refluxed in the presence of a surface-active molecule, such as alkanethiol. The mDR method involved a small modification in the procedure, wherein refluxing was performed with an alkanethiol and a tetra-alkylammonium bromide surfactant. This minor modification led to a dramatic change in the final particle size distributions, giving access to nanoparticles in the <3 nm size regime; this was not possible with the traditional DR process. Bromide ions, which are present during refluxing, proved to be an important ingredient in the modification process. These bromide ions are revealed to act as etchants, resulting in ultra-small nanoparticles. All transition metal nanoparticles investigated displayed catalytic activity in the reduction reaction of p-nitro phenol. Pd nanoparticles, synthesized by a modified digestive ripening method, exhibited the best catalytic activity among the systems investigated.

Open image in new window

     

Investigating the effect of nanoparticles on the rutting behaviour of hot-mix asphalt

Rutting is considered as one of the major damages in asphalt mixtures. In this study, different types of nanoparticles such as TiO₂, Al₂O₃, Fe₂O₃ and ZnO in different percentages were added to the base asphalt binder in order to decrease the rutting potential of hot-mix asphalt (HMA). In the first step, asphalt binder tests for characteristics such as penetration grade, ductility, softening point and viscosity were performed on the asphalt binder modified by the nanoparticles. Then, after preparing HMA samples, the static creep test was done at two stress levels at a specific temperature. Results of this study showed that using the nanoparticles improved the behavioural properties of the asphalt binder and decreased rutting in asphalt mix samples. Furthermore, scanning electron microscope images taken from the asphalt binder samples modified by the nanoparticles demonstrated that these nanoparticles were properly distributed in the asphalt binder space and had a positive effect on the rutting performance of the asphalt mixes.     

Development and Characterization of C/C-SiC Brake Disc

A new process was developed to produce full-size carbon/carbon-SiC brake discs consisting of two friction layers and a structural layer. Different lengths of chopped carbon fibers were used for the friction layers and structural layer. A preform of each layer was produced by hot-pressing a mixture of resin and carbon fibers. After pyrolyzing the preforms, the layers were joined by hot-pressing. Finally, liquid Si infiltration was performed to obtain a C/C-SiC brake disc. The tensile strength, compressive strength, and bending strength were 40, 46, and 61 MPa, respectively. The density of the disc was 2.1 g/Cm³. The heat transfer coefficient in the vertical direction was 16.5 W/m-°C, and it was 45.9 in the horizontal direction. The friction coefficients obtained under various braking conditions showed stable and suitable values, 0.2–0.6.     

Fabrication of photoactive heterostructures based on quantum dots decorated with Au nanoparticles

Silica based multifunctional heterostructures, exhibiting near infrared (NIR) absorption (650–1200 nm) and luminescence in the visible region, represent innovative nanosystems useful for diagnostic or theranostic applications. Herein, colloidal synthetic procedures are applied to design a photoactive multifunctional nanosystem. Luminescent silica (SiO₂) coated quantum dots (QDs) have been used as versatile nanoplatforms to assemble on their surface gold (Au) seeds, further grown into Au spackled structures. The synthesized nanostructures combine the QD emission in the visible region, and, concomitantly, the distinctive NIR absorption of Au nanodomains. The possibility of having multiple QDs in a single heterostructure, the SiO₂ shell thickness, and the extent of Au deposition onto SiO₂ surface have been carefully controlled. The work shows that a single QD entrapped in 16 nm thick SiO₂ shell, coated with Au speckles, represents the most suitable geometry to preserve the QD emission in the visible region and to generate NIR absorption from metal NPs. The resulting architectures present a biomedical potential as an effective optical multimodal probes and as promising therapeutic agents due to the Au NP mediated photothermal effect.     

Water-soluble magnetic-graphene nanocomposites: Use as high-performance adsorbent for removal of dye pollutants

In this study, the water-soluble magnetic-graphene nanocomposites (Fe₃O₄@GNs-SO₃H) were fabricated via a simple and efficient approach. The water-soluble magnetic-graphene nanocomposites were applied as an effective adsorbent for removal of organic dye, malachite green, from aqueous solution. It is noteworthy that the nanocomposites displayed good water-dispersibility, rapid absorption rate, high absorption capacity, and convenient magnetic separation. Furthermore, the novel adsorbent could be recovered and recycled for 15 consecutive trials without significant loss of its activity.     

Iron‐Oxide‐Based Nanovector for Tumor Targeted siRNA Delivery in an Orthotopic Hepatocellular Carcinoma Xenograft Mouse Model

Hepatocellular carcinoma (HCC) is one of the deadliest cancers worldwide. Small interfering RNA (siRNA) holds promise as a new class of therapeutics for HCC, as it can achieve sequence‐specific gene knockdown with low cytotoxicity. However, the main challenge in the clinical application of siRNA lies in the lack of effective delivery approaches that need to be highly specific and thus incur low or no systemic toxicity. Here, a nonviral nanoparticle‐based gene carrier is presented that can specifically deliver siRNA to HCC. The nanovector (NP‐siRNA‐GPC3 Ab) is made of an iron oxide core coated with chitosan‐polyethylene glycol (PEG) grafted polyethyleneimine copolymer, which is further functionalized with siRNA and conjugated with a monoclonal antibody (Ab) against human glypican‐3 (GPC3) receptor highly expressed in HCC. A rat RH7777 HCC cell line that coexpresses human GPC3 and firefly luciferase (Luc) is established to evaluate the nanovector. The nanoparticle‐mediated delivery of siRNA against Luc effectively suppresses Luc expression in vitro without notable cytotoxicity. Significantly, NP‐siLuc‐GPC3 Ab administered intravenously in an orthotopic model of HCC is able to specifically bound to tumor and induce remarkable inhibition of Luc expression. The findings demonstrate the potential of using this nanovector for targeted delivery of therapeutic siRNA to HCC.