THERMODYNAMICS AND PHASE EQUILIBRIUM OF Cu－Y－O，Cu－Y－S，Cu－Y－O－S LIQUID SOLUTIONS

ＴＨＥＲＭＯＤＹＮＡＭＩＣＳＡＮＤＰＨＡＳＥＥＱＵＩＬＩＢＲＩＵＭＯＦＣｕ－Ｙ－Ｏ，Ｃｕ－Ｙ－Ｓ，Ｃｕ－Ｙ－Ｏ－ＳＬＩＱＵＩＤＳＯＬＵＴＩＯＮＳ￥Ｄｕ，Ｔｉｎｇ；Ｌｉ，Ｇｕｏｄｏｎｇ（ＣｅｎｔｒａｌＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈｉｎｓｔｉｔ...     

YCl_3－AECl_2（AE＝Mg，Ca，Sr，Ba）二元相图的研究

用差热分析法测定了ＹＣｌ_３一ＳｒＣｌ_２体系二元相图，并用Ｘ时线衍射法验证了该二元体系中新相的生成。使用ＣＡＬＰＨＡＤ技术评估和优化了ＹＣｌ_３一ＡＥＣｌ_２（ＡＥ＝Ｍｇ，Ｃａ，Ｓｒ，Ｂａ）系列四个二元相图和热力学性质，取得了热力学性质和相图自相一致的结果。     

Intermetallic phase formation in directionally solidified Al−Si−Fe alloy

The present study has been undertaken to better understand the solidification behavior of Al−Si−Fe alloys containing 7wt.% Si and 0.9wt.% Fe, with particular regard to the formation of phase during controlled solidification and influence of growth rates on intermetallic phase selection. The alloys studied were Al-7Si-0.9Fe alloys, which were produced by a modified Bridgman solidification arrangement. These alloys were solidified unidirectionally with different growth rates (1–30mm/min). The solidified microstructure of these alloys consists of the growth of primary aluminum and multiple second phase reactions.     

A new high strength and high tolerance-resistance A1-Li alloy

In order to develop a new high strength and high tolerance-resistance Al-Li alloy which can be used in aerospace industry, the effects ofmicroalloying elements such as Mg, Ag, Mn and Zn on the mechanical properties of Al-Cu-Li alloys were studied. The results show that the strengthening effects of Mg＋Ag and Mg＋Zn additions are higher than those of the individual Mg, Ag or Zn addition. The element Mn can also bring some extent strengthening effects on the alloys, but it has nothing to do with the other microalloying elements present or not. Finally, a new Al-Li alloy with Mg＋Zn＋Mn additions was developed, which possesses high strength and high tolerance-resistance promising properties for aerospace applications.     

中间退火前后冷轧变形量对3003铝合金阴极箔比电容的影响

采用扫描电镜及能谱仪,透射电镜和比电容检测等方法研究了中间退火前后冷轧变形量对3003铝合金阴极箔第二相分布及比电容的影响.结果表明:随着最终冷变形程度的增加,位错密度增大,从而比电容值显著提高;最终冷轧变形量为90%时,比电容达到最大值,继续增加冷轧变形量,比电容值反而下降;但对于最终冷轧变形量95%的箔材,由于中间退火前冷轧变形量较低,使得退火过程中析出的弥散第二相数目减少,最终导致成品箔中的腐蚀位置减少,比电容降低.     

Grinding induced effects in plasma sprayed zirconia coatings

The effect of grinding on the surface layer properties of ceria and yttria partially stabilized zirconia plasma-sprayed coatings (CePSZ, YPSZ, respectively) has been studied by X-ray diffraction methods. For this purpose, the modified model of line broadening analysis has been derived. The model considers elastic anisotropic properties along with more random paracrystal imperfections, both affecting X-ray line broadening. Grinding-induced microstructural changes were also studied using an estimation from the quantitative Orientation Distribution Function (ODF) texture. It was concluded, based on this work, that CePSZ ceramic is less mechanically stable compared to YPSZ. Consequently, more beneficial mechanical properties of a ground surface layer can be expected for CePSZ plasma-sprayed coatings.     

瞬间液相连接的过冷连接新工艺

提出了瞬间液相(TLP)连接的新工艺--过冷连接工艺,即首先将待连接区域加热至某高温进行短时保温,然后再降至一定温度进行长时保温连接.由于液相经历了一次温度过冷,在液/固界面前沿就形成了成分过冷区,破坏了平衡状态下的界面稳定性,形成胞状界面.随着凝固过程的完成,界面消失,形成跨界面连续晶粒,实现冶金接合.以Fe-Ni基非晶合金为中间层,进行了低碳钢过冷TLP连接实验,并与传统的TLP连接工艺进行了比较.结果表明,过冷TLP连接工艺产生了非平面状界面,并且随着凝固的完成界面消失,形成无界面的组织均匀接头.与传统TLP连接工艺接头相比,过冷TLP连接工艺可大大提高接头冲击韧性,其数值达到母材水平.     

快速凝固Al—8.3Fe—1.9V—2.1Si合金的相转变

借助扫描电子显微分析、Ｘ射线衍射技术、差热分析手段研究了快速凝固Ａｌ－８．３Ｆｅ－１．９Ｖ－２．１Ｓｉ合金的相组成及相转变温度。结果表明，合金中的相组成为αＡｌ＋Ａｌ１３（Ｆｅ，Ｖ）３Ｓｉ相；在６３８℃－６４５℃温度范围内，立方结构的Ａｌ１３（Ｆｅ，Ｖ）３Ｓｉ相向六方结构的Ａｌ３（Ｆｅ，Ｖ，Ｓｉ）相转变。钒添加至Ａｌ－Ｆｅ－Ｓｉ合金中，提高了快速凝固Ａｌ－８．３Ｆｅ－１．９Ｖ－２．１Ｓｉ合金粉末的     

APPLICATION OF d-ELECTRON ALLOY DESIGN THEORY TO DEVELOPMENT OF HOT CORROSION RESISTANT Ni-BASE SINGLE CRYSTAL SUPERALLOYS——Ⅰ Characterization of Phase Stability

为应用d-电子合金设计理论(或新相分计算法(New PHACOMP))设计发展新型抗热腐蚀单晶高温合金,首先对高Cr抗热腐蚀IN738LC系列合金Ni—16Cr—9.5Al—4.0Ti-8.0Co—0.55Nb—0.06Zr—0.05B—0.47C-Ta—W—Mo(at-％)的相稳定性进行了综合评价得出抑制σ相析出的稳定性临界条件为Mdt<0.991或Mdγ<0.93同时证明这两个临界电子参数具有等价性,可以用Mdt代替Mdγ简化合金设计过程.这一结果可适用于其它高Cr系列抗热腐蚀镍基合金的d-电子合金设计     

SOLUBILITY CHARACTERISTICS OF GaAs IN Bi AND THEIR PHASE DIAGRAM

A modified liquid phase epitaxy apparatus for semiconductor materials was used to measurethe solubility of GaAs in Bi.Two phase diagrams rich in Bi under H_2 and N_2 atmosphereswere obtained according to the results of measurement.A new phenomenon,in which theparameter Q value(quantity of GaAs dissolved in Bi in fixed time/saturation quantitu,ofGaAs in Bi)was different from each other at various temperatures and there existed a maxi-mum Q value at definite temperature,was observed.This phenomenon may be regarded as acommon feature of a simple binary metallic system which has the phase diagram similar tothat of Bi-GaAs.The difference observed from the dependence of Q values on temperature inboth H_2 and N_2 atmospheres was discussed.