Plasma properties of laser-ablated St target in air

Ｐｌａｓｍａｐｒｏｐｅｒｔｉｅｓｏｆｌａｓｅｒ－ａｂｌａｔｅｄＳｔｔａｒｇｅｔｉｎａｉｒＷａｎｇＸｉａｎｇ－Ｔａｉ（王象泰）；ＭａｎＢａｏ－Ｙｕａｎ（满宝元）；ＷａｎｇＧｏｎｇ－Ｔａｎｇ（王公堂）；ＦａｎＸｉ－Ｊｕｎ（樊锡君）；ＷａｎｇＪｕｎ（王军）...     

高能超声作用下数种金属基复合材料的制备及机制

利用高能超声振动制备了A l/陶瓷, ZA 22/陶瓷(粒子平均直径2L) ,A l/P b (Pb 粒子直径< 25L) 和A l/F eA l₃等金属基复合材料, 弥散相在基体中有良好的分布均匀性。依据超声波对熔体作用时的空化和声流效应, 讨论了上述数种复合材料的制备机制。试验结果显示, 该项技术在制备数类金属基复合材料方面具有广泛的适用性。     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

超声跟踪法制作误差对器件性能的影响及补偿

研究发现快模入射超声跟踪氧化碲器件的布喇格损耗频响对于参数误差十分敏感,因而制作误差可能对器件性能有较大影响。本文系统研究了这种影响及其补偿方法,结果表明,当相邻两换能片之间中心距S有5%的误差和声偏置角丫_0有10%的误差时,通过调整入射角θ_1可作出完全的补偿。     

Energy relaxation in GaInAs/AlInAs heterojunctions and GaAs/AlGaAs multiple quantum wells

We have studied electron energy relaxation in GaInAs/AlInAs heterojunctions and GaAs/AlGaAs multiple quantum wells using mobility measurements as a function of electric field and temperature, in the range 3K to 300K. The results in the range 3 to 20K show a power loss rate which is dependent on (T_e − T_l), suggesting that the energy relaxation occurs through acoustic phonon scattering. At electron temperatures greater than 20K, the experimental results are modelled using a standard expression for polar optical phonons. This modelling yields 30meV and 31meV for the polar optical phonon energy in GaAs and InGaAs respectively.     

Application of Acoustic Wave Propagation Analysis Methods for Monitoring a Miscible Mixing Zone in Porous Media

The Biot's acoustics theory, which describes acoustic wave propagation in a porous medium, and computer simulation techniques were utilized to model the behavior of acoustic waves entering and leaving a mixing zone in a miscible displacement in porous media. The results indicate that the angles of waves produced by a mixing zone are equal to angles of waves produced by an abrupt fluid-fluid interface. Therefore, acoustic methods and a relationship between the incident, reflection, and transmission angles can be used to determine the location and thickness of the mixing zone during a miscible displacement process in porous media.     

Method of increasing the output signal-to-noise ratio in passive multi-element antenna arrays

A method of processing complex signals in passive multi-element antenna arrays based on an analysis of the natural values of the correlation matrix of the signal is considered. By means of the method it is possible to substantially increase the output signal-to-noise ratio. An iterational process by means of which optimal estimators of both the signal and the amplitude-phase distribution may be obtained, is proposed. Theoretical estimators of the efficiency of the method are given. It is proved that, in terms of the efficiency, the approach considered in the article comes close to the technique of matched filtration. Results of statistical modeling that confirm the statistical results are presented.     

Quantitative non-destructive characterization of damage in graphite-epoxy composites

We investigated the effect of controlled damage on the residual strength, failure mechanism and acoustic emission (AE) activity of graphite epoxy composites. The controlled damage was introduced by indenting unidirectional tensile specimens using a hardness machine with a diamond indentor. The specimens were loaded parallel to the fiber direction. The damage progression mechanisms operating upon subsequent loading and the failure modes were found to be different for sound and indented specimens. The difference in mechanical behavior affected also the AE, as displayed by the statistical moments of the peak amplitude distribution. Specifically, the variation of moment values with stress level were found to be different for the two groups. This difference can be used to sort sound from defective material during loading. In addition, this approach can in future be used as a means to ratify the soundness of structures, if a reliable database can be generated.     

真空微电子三极管几何参数的设计考虑

真空微电子三极管是近年来兴起与发展的真空微电子学中的一类重要器件。本文从真空微三极管的工作特性出发,分析了这类器件中所需考虑的几何参数和工作特性的关系,并给出了一些理论和实验公式,为今后的设计提供一些参考。     

Red emission from Eu3+: PVA polymer film

Bright red luminescent Eu³⁺ doped polyvinyl alcohol (PVA) films were made by solution casting technique. The emission performance of these films was studied from the measurement of excitation, emission, and lifetimes. On irradiation with an UV source, the doped films emitted bright red light. Such luminescent polymer films are expected to find potential applications as new optical materials. Emission process in the system was explained by an energy level scheme. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3273–3276, 2006