单相硼化物的制备及摩擦磨损性能研究

为了深入研究渗硼层中硼化物的性能，采用真空感应熔炼法制备单相硼化物材料。观察分析制备的硼化物微观组织，测试其力学性能。采用MMU-5G型销-盘式摩擦磨损试验机，在干摩擦条件下，研究了不同载荷下单相硼化物的摩擦学性能，观察其磨损表面形貌特征，探讨其磨损方式。结果表明：制备的硼化物为单一相，试样纯度高，试样的平均显微硬度为HV2065，平均断裂韧性值为1.68 MPa·m1/2；硼化物的断口处没有宏观的塑性变形，断口齐平光亮，表现为脆性断裂特征；干摩擦条件下随着载荷从10 N增加到30 N，硼化物的摩擦因数先降低后增加，20 N载荷时达到最小值，而其磨损量随着载荷的增加不断上升；随着载荷从10 N增加到30 N，磨损表面的粗糙度先逐渐上升后急剧上升； 10~20 N载荷下，硼化物的磨损以磨粒磨损为主，而25~30 N载荷下，硼化物的主要磨损方式从磨粒磨损转变为脆性破损。     

户内热转印粉末涂料用混合型聚酯树脂的合成研究

通过分析热转印性能的影响因素合成了不同结构的聚酯树脂，研究了树脂酸值对热转印性能的影响，同时研究了部分单体对聚酯树脂热转印性能的影响。采用 DSC热分析法研究了固化促进剂对粉末涂料固化行为的影响，结果表明：选择合适的固化促进剂对涂层转印性能的提高有至关重要的作用。     

深水井控中节流管线摩阻分析及压井方法

在海洋深水钻井中，防喷器组一般安装在海底，当发生井涌进行压井作业时．由于节流管线较长、内径较小，钻井液在节流管线内存在高摩阻损失，作用在井底的压力往往大于地层的破裂压力．从而引起压井过程的复杂化，甚至造成压井作业的失败。介绍了一种新的压井方法附加流量法，在返出的节流管线流体中混入低密度流体，降低节流管线内流体的粘度和密度，从而实现安全压井；详细介绍了压井方法和步骤。数据分析表明，通过对压井参数进行优化选择能够降低节流管线中的压耗。     

结构形式对椭圆扁管管内传热与流阻性能影响

利用数值模拟方法结合场协同理论,对直椭圆扁管、单向螺旋椭圆扁管和变向螺旋椭圆扁管管内传热与流动情况进行了数值模拟计算和理论分析,比较研究了不同的Re、Pr下,3种椭圆扁管的管内传热与流阻特性。结果表明,单向螺旋椭圆扁管和变向螺旋椭圆扁管与直椭圆扁管相比有很好的强化传热性能,而变向螺旋椭圆扁管要比单向螺旋椭圆扁管的强化传热性能更好。在管内流体具有高Pr及低Re的条件下,2种螺旋椭圆扁管的强化传热效果显著,可作为很好的强化传热元件应用于工程实际中。     

Influence of Polyalkylmethacrylate VII on Boundary Film Formation,Friction,Wear and Efficiency of Lubricants

1 Influence of PAMAon Boundary Fil mFormation and Friction1.1 Experi mental methodsUltra-thin optical interferometry has been used tostudy thinlubricating fil ms for more than a decade and theexperi mental details of this technique have been reportedpreviously[1].The principle of the test setup is shown inFigure1.A polished steel ball is loaded and rolled againstthe flat surface of a glass disc that is coated with a thinsemi-reflecting chromiumlayer and a silica spacer of about500nmthickne…     

河口海岸近底层潮流速分布模式初步研究

许多现场实测资料表明,潮流近底流速剖面偏离传统的对数分布。虽然偏离值可能不大,但利用对数剖面去计算河底粗糙长度和剪切应力时会引起较大的误差。有研究者的数值试验表明,如果通过流速是对数分布来估计粗糙长度和底部切应力,偏差可能超过100%(Kuo等,1996)。本文从流体动力学原理出发,利用Prandtl混合长度和Von Karman自相似理论,建立河口海岸近底层潮流速分布的对数线性模式。通过对英国大陆南部西Solent水道实测水流垂向分布进行枚举粗糙长度z0结合最小二乘法拟合,并将计算结果与传统的对数模式的结果比较,表明本文模式有以下优点:①精度高,计算值更接近实测值;②所确定的粗糙长度z0和摩阻流速u*的相关系数更高,且两者在相位上更趋一致。     

The Person Reference Process in Spontaneous Trait Inferences.

Five studies examined whether spontaneous trait inferences uniquely reference the person who performed a trait-implying behavior. On each study trial in 5 studies, participants saw 2 faces and a behavioral sentence referring to one of them. Later, participants saw face-trait pairs and indicated whether they had seen the trait word in the sentence presented with the face. Participants falsely recognized implied traits more when these traits were paired with actors' faces than with control faces. This effect was replicated for a large set effaces (120), after a week delay between study and recognition test, when equal attention was paid to each face, and when the orientation of the face at recognition was different from the orientation at encoding. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of thermal treatments on the elastic parameters in iron rich metallic glasses

The change of magnetoelastic properties after thermal treatments has been investigated for two groups of metallic glasses. (Fe₇₉Co₂₁)_75+xSi_15−1.4xB_10+0.4x (x (at.%)=0, 2, 4, 6, 8, 10) has been studied both in the as-prepared state and after thermal annealing in an applied magnetic field, to achieve a particular domain structure, at temperatures well below the crystallization temperatures. Changes in the ΔE effect, magnetomechanical coupling (k) and internal friction coefficient (Q⁻¹) are reported, reaching values of about 60% of the saturation value E_S. Fe₆₄Ni₁₀Nb₃Cu₁Si₁₃B₉ alloys annealed in vacuum for 1 h in the temperature range 350–550 °C showed maximum values of the ΔE effect and k of 61% and 0.85, respectively, accompanied by a minimum value of Q of around 2 for the sample annealed at 460 °C. These variations are related to the progress of nanocrystalization. The properties achieved are among the best reported for magnetomechanical applications.     

Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K

Mechanical spectroscopy, neutron diffraction and differential scanning calorimetry (DSC) were performed on commercial Fe–6 wt.% Si alloy after quenching from high temperature. The damping spectrum shows a peak at around 800 K and an associated modulus defect. The modulus shows an increase during the second and subsequent heating runs. In addition, an anomaly in the modulus behavior has been found at around 400 K. Different thermal treatments allows to obtain two different recovery degrees of the quenched-in defects. The influence of the recovery degree on the 800 K internal friction peak and on the anelastic modulus has been evaluated and confirm the validity of the grain boundary mechanism associated to this peak. Experimental results are discussed on the basis of recovery and ordering processes.     

Night and Day: Are Siblings as Different in Temperament as Parents Say They Are?

Twin studies suggest that parent ratings of temperament exaggerate differences between twins. The present study examined whether such contrast effects also operate for nontwin siblings. The activity level (AL) and shyness of 95 nontwin sibling pairs (ages 3 to 8 years) were assessed via parent ratings and objective measures (actigraph and observer ratings). Siblings showed no resemblance in either parent-rated AL or shyness; however, sibling resemblance for actigraph AL and observer-rated shyness was substantial. Thus, parents do contrast their nontwin siblings when rating these 2 temperament dimensions. Moreover, the importance of sibling differences in temperament to the sibling relationship and differential maternal treatment varied across the different measures of AL and shyness, suggesting that parent perceptions may play a role in these associations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)