烧结工艺对液相合成（SrPb）TiO3基陶瓷热敏特性影响的研究

本文在液相合成（ＳｒＰｂ）ＴｉＯ３粉的基础上，研究了升温速率、保温时间、烧结温度及降温方式对（ＳｒＰｂ）ＴｉＯ３基陶瓷的Ｖ型ＰＴＣ热敏特性的影响。实验表明：升温速率对其热敏特性影响不大，保温时间和烧结温度的作用是一致的，具有一最佳范围。而降浊方式对材料的热敏特性影响较大。综合各因素的影响，本配方中，样品的烧结制度定为：以２００℃／ｈ的速率升温，在１２５０℃保温１ｈ，炉冷至９５０℃，保温０．５ｈ，再     

PP／SiO2／SBS共混复合材料性能的研究

通过加入增强剂、增韧剂、抗氧剂等添国剂可改善聚丙烯力学性能。以ＳｉＯ２为填料，丁苯橡胶（ＳＢＳ）为增韧剂，探讨ＳｉＯ２、丁苯橡胶含量对共混体系强度、韧性的影响，结果表明，在ＳＢＳ含量大于５％、ＳｉＯ２一小于１０％的范围内，可使ＰＰ／ＳｉＯ２／ＳＢＳ复合的拉伸弹性模量和冲击强度明显提高，其力学性能均为均衡。     

用强度系列成象法获取或显示高动态范围图象

提出一种适合于高动态范围图象的获取和显示的强度系列成象法。改变输入图象的强度，微机控制的图象采集系统进行记录得到一组磁盘文件，形成强度图象系列。基于记录的系列图象，可以进行信息提取、变换和显示等操作。基于获得的图象系列，提出一种剪贴操作进行快速的非线性图象变换。给出对光学功率谱处理的一个实例，它相当于进行锯齿形的非线性变换。     

Control strategies for reactive batch distillation

A batch reactor may be combined directly with a distillation column by distilling off the light component product in order to increase the reactor temperature or to improve the product yield of an equilibrium reaction. The same amount of the light product should be removed as the amount being formed by the reaction at any time. A linearized model has been developed which describes the process behaviour satisfactorily for control analysis purposes. The controllability of a combined batch reactor/batch distillation column is found to depend strongly on the operating conditions and on the time during the run. In general, controlling only the reactor temperature (one-point bottom control) is difficult since the set-point has to be specified below a maximum value in order to avoid break-through of an intermediate component in the ditillate. This maximum value may be difficult to know a priori. For the example considered in this study, control of both reactor temperature and distillate composition (two-point control) is also found to be difficult due to large interactions in the column. As with one-point bottom control, the reactor temperature has to be specified below a maximum value. However, energy can be saved since the heat duty can be decreased with time. Controlling the temperature on a tray in the column (one-point column control) is found to give good performance for the given process with no loss of reactant and a high reactor temperature, although no direct control of the reactor temperature is obtained.     

ASSM-Ⅱ型声学悬浮泥沙观测系统

本文介绍了一种新型的水文观测设备－“ＡＳＳＭ－Ⅱ型声学悬浮泥沙观测系统”，它可认自动，连续和长时间地实时观测水中悬浮泥沙深度分布和动态变化过程，文中介绍了工作原理框图，技术参数，性能特点及海上现场观测结果。     

氢电弧等离子体法制备的纳米镍铈粒子的催化特性

利用氢电弧等离子法制备具有储氢特性纳米镍铈粒子，并在气相苯加氢反应中研究了其催化特性，发现其催化活性与储氢特性及表面层中ＮｉＣｅ合金存在有关，且具有高的选择性和热稳定性，这与纳米粒子独特的结构及铈的加入有关。     

Efficient simulation of hierarchical stochastic activity network models

Stochastic extensions to Petri nets have gained widespread acceptance as a method for describing the dynamic behavior of discrete-event systems. Both simulation and analytic methods have been proposed to solve such models. This paper describes a set of efficient procedures for simulating models that are represented as stochastic activity networks (SANs, a variant of stochastic Petri nets) and composed SAN-based reward models (SBRMs). Composed SBRMs are a hierarchical representation for SANs, in which individual SAN models can be replicated and joined together with other models, in an iterative fashion. The procedures exploit the hierarchical structure and symmetries introduced by the replicate operation in a composed SBRM to reduce the cost of future event list management. The procedures have been implemented as part of a larger performance-dependability modeling package known asUltraSAN, and have been applied to real, large-scale applications. This work was supported in part by the Digital Equipment Corporation Faculty Program: Incentives for Excellence.     

低频电脉冲采油工程设备的开发与应用

低频电脉冲采油技术是通过升压、整流、充电等电路将电能蓄积在电容器中,通过触发电路,使能量瞬时释放,在井内液体中产生震动波,作用于地层,改善地层的渗流状况,达到提高采收率的目的。Ⅰ型设备在双河油田应用11井次,成功率72%;Ⅱ型设备在古城油田应用10井次,成功率90%。主要是由于Ⅰ型设备关键部件在处理油井时要放在井下,受高温、高压的影响及井下空间的限制,设备稳定性差、寿命短、能量小、效果差;Ⅱ型设备解决了上述问题,从而提高了试验成功率。     

秸杆材料用作草皮栽培基质的研究

本文介绍了秸杆毡的成型工艺 ,通过植物所需的水、肥料和空气三种因素对秸杆毡的化学和物理性能进行了研究 ,该材料可被用作草皮栽培基质     

利用CFD获取超声流量计截面速度分布

 通过CFD技术在超声波流量计设计过程中的引入,为流量系数的获取提供了新的途径.通过对特定管道的理论计算表明,采用CFD技术获取的管道内部流型完全可以与试验数据吻合,有助于超声波流量计应用场合流量系数曲线的获取及其精度的保证.