一维波动方程反演波阻抗的实现及效果

利用波动方程反演波阻抗，由于计算工作量大、稳定性差等原因，一直没有在地震勘探资料处理中得到实际应用。本文提出的一维波方程逐段折叠反演方法能较好地克服上述缺陷，具有计算量相对较小、精度高、稳定性好等特点。并在大庆长垣东部和西部的实际资料处理中见到了良好的效果。     

叠后高分辨率资料处理方法及应用效果

高分辨率勘探是一项系统工程，它由多个环节组成。甚至叠后高发辨率资料处理也是由多个环节组成。本文介绍的叠后高分辨率资料处理流程主要包括Ｌｐ模自适应预测统计反褶积，高频成分补偿，振幅补偿及有色成分校正。文中还就处理流程中各种方法的合理组合，各种方法自身参数的合理选取作了试验和探讨，最后给出了处理实例。     

蒙特卡洛法速度谱的自动拾取

蒙特卡洛速度谱的自动拾取采用一种非线性优化的快速方法，所得叠加速度的精度可以满足常规地震资料处理中叠加的要求，转换为层速度后可用于叠前深度偏移成象，在给定初始速度模型前提下建立优化目标函数。采用蒙特卡洛非线性优化算法，以最大相似度量准则在考虑实际地质条件前提下给出速度约束条件，对初始速度模型加以扰动，自动寻找速度谱中叠加能量的全局最优解，从而获得合理的速度模型。实际地震资料处理的应用结果表明，自动拾取速度谱比常规的人工速度谱解释工作的效率大幅度提高。在SUN Ultra60机上,仅需1h即可完成2000km的地震资料的速度谱拾取任务，而且所获得的速度模型不受人为因素影响，转换所得的层速度模型用于叠前深度偏移后，获得了满意的成象效果。     

地震和测井联合反演储层波阻抗技术

通过地震和测井联合反演，可以获得高分辨率的井间地层波阻抗分布的信息。综合应用波动方程反演和神经网络分析来反演地层波阻抗参数，其过程分3步：第一步，应用先验地质知识，对地震数据和测井曲线进行地质解释，并对油井曲线进行对层和标定，然后求取相应的层速度的低频信息，旨在搞清井间地层结构状况，为线性反演提供地层产状的先验信息；第二步，应用非线性波动方程反演，在层速度界面及井中物性参数约束下，从地震数据中反演高分辨率的反射系数及波阻抗参数；第三步，应用CUSI神经网络分析方法，以高分辨率的反射系数及波阻抗等参数作为约束，以沿层求取的地震特征作为输入，以井中反演的波阻抗参数为期望输出，对非线性波动方程反演出的波阻抗参数进行非线性标定，得出井间的地层绝对波阻抗物性参数。     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

结构振动控制中压电阻尼技术研究—压电被动阻尼技术（一）

压电阻尼技术有两种类型：压电被动阻尼技术和压电主动阻尼技术。本文对其中的压电被动阻尼技术进行了研究，结果表明：通过给压电元件并联适当的外部电路，可使压电系统具有与粘弹阻尼材料及动力吸振器相似的物理特性。合理配置电路参数，可以实现最优阻尼比。     

Effect of heat-treatment on the surface properties of gallium phosphide nanosolids by Raman spectroscopy

Raman spectra of gallium phosphide （GAP） nanosolids （unheated and heat-treated at 598 and 723 K, respectively） were investigated. It was observed that both the longitudinal optical mode （LO） and the transverse optical mode （TO） displayed an asymmetry on the low-wavenumber side. The scattering bands were fitted to a sum of four Lorentzians which were assigned to the LO mode, surface phonon mode, TO mode, and a combination of Ga-O-P symmetric bending and sum band formed from the X-point TA ＋ LA phonons, respectively. Analysis of the characteristic of surface phonon mode revealed that the surface phonon peak of the GaP nanosolids could be confirmed. In the infrared spectrum of the GaP nanoparticles, we observed the bands on account of symmetric stretching and bending of PO2, as well as stretching of Ga-O The Raman scattering intensity arising from the Ga-O-P linkages increased as increasing the heat-treatment temperature.     

机载隐蔽式短波天线研究

给出了一种用于Y7—200A运输机的隐蔽式短波天线，该天线为位于飞机垂尾前缘的回线天线，与飞机的外形共形，不影响飞机的飞行性能。在利用传输线理论与缝隙天线理论对该天线进行分析的基础上，对输入阻抗、天线与天线调谐器结合后的天线效率进行了研究，给出了该天线与KHF950电台相配合的测试试验结果，该天线能够在2．5MHz到30MHZ范围内与KHF950电台良好调谐，表明这种天线完全可以用于Y7—200A型飞机，代替原有的钢索天线。这是在国产飞机上首次使用这种天线。     

Reactor modelling for electrochemical processes

This paper presents a relatively straightforward approach to the modelling of electrochemical reactors operated in batch or continuous modes. The models are based on ideal flow assumptions of either well-mixed or plug flow and incorporate reaction rate models based on electrochemical kinetics and mass transport at one electrode. General characteristics of the reactor models are described, particularly with regard to the need for good mass transport in metal recovery applications. An example is given on the use of the model in the recovery of a heavy metal (Cd²⁺) from an acidified solution containing Cd(II) and Fe(III) ions. The reaction rate model is based on experimental data.     

Electrosynthesis and impedance studies on zinc selenide

Electrochemical impedance measurements have been used to characterize zinc selenide films prepared by electrochemical co-deposition at a platinum rotating disk electrode. Estimations of capacitance and polarization resistance of variously prepared electrodeposits have been carried out to determine charge carrier density and corrosion rates.