Suppression of void coalescence in thermal aging of tin-silver-copper-X solder joints

Addressing the potential for drop impact failure of Pb-free interconnects, the shear ductility after extensive aging of Sn-Ag-Cu (SAC) solders has been improved radically by Co or Fe modifications. Several other SAC+X candidates (X=Mn, Ni, Ge, Ti, Si, Cr, and Zn) now have been tested. Solder joint microstructures and shear strength results show that new SAC+X alloys also suppress void formation and coalescence at the Cu (substrate)/Cu₃Sn interface (and embrittlement) after aging at 150°C for up to 1,000 h. Microprobe measurements of 1,000 h aged samples suggest that Cu substitution by X is usually accentuated in the intermetallic layers, consistent with X=Co and Fe results.     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

面板坝垂直缝失效渗流场有限元模拟

以班多面板堆石坝为例,用有限元方法计算了当面板缝局部失效时各种工况下的渗流场,系统分析了大坝在面板垂直缝局部失效后的稳定渗流场的规律和特点。通过分析计算结果,指出了面板缝的失效位置、失效缝宽、失效缝长以及垫层的渗透系数对等势线和浸润线的影响,并且对面板、垫层和接缝的设计提出建议。     

Gaze cueing of attention: Visual attention, social cognition, and individual differences.

During social interactions, people's eyes convey a wealth of information about their direction of attention and their emotional and mental states. This review aims to provide a comprehensive overview of past and current research into the perception of gaze behavior and its effect on the observer. This encompasses the perception of gaze direction and its influence on perception of the other person, as well as gaze-following behavior such as joint attention, in infant, adult, and clinical populations. Particular focus is given to the gaze-cueing paradigm that has been used to investigate the mechanisms of joint attention. The contribution of this paradigm has been significant and will likely continue to advance knowledge across diverse fields within psychology and neuroscience. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种新型预应力托换结点的试验研究

针对深圳地铁的桩基托换而进行了一种新型预应力托换结点的试验研究，通过试验，得到了此托换结点的受力特性，为同类的大型托换的理论及实践提供了一种安全可行的方案。     

桥口南--徐集地区三维地震资料连片处理技术

针对东濮桥口南—徐集地区三维地震资料的特点及本区块的地质要求，制定处理流程，应用能量均衡、面元均化、三维道内插、三维DMO叠加及三维一步法偏移等技术方法，研究解决因为不同年代、不同方法、不同参数所采集的地震数据在连片处理时存在的问题，精细处理三维连片资料，满足构造解释精度的要求，对进一步落实该区构造和增储上产具有重要的作用。     

唐钢第二炼铁厂3#高炉开口机改造及效果

对唐钢第二炼铁厂3#高炉开口机的工作原理及其在工作中存在的问题进行了分析，通过对开口机四连杆机构、十路接头油管的改造，节约了大量的备件费用，具有较好的推广使用价值。     

连续多跨大柱距空旷厂房的空间结构设计

以鞍钢大型厂房改造工程为例,介绍了一种打破常规的空间设计方法,并阐述了大跨度吊车桁架支座、节点等重要传力部位的构造形式及其利弊,可供同类工业厂房改造工程设计时参考。     

混凝土框架节点有限元分析

以文献[4]中所做的碳纤维布加固节点的试验为依据,应用ANSYS程序对其中的试件2进行单调加载情况下的全过程数值模拟计算,最后通过数值计算结果与试验结果在承载能力、裂缝开展及破坏形态等方面的比较,来验证应用ANSYS程序模拟碳纤维布加固钢筋混凝土框架节点抗震性能试验的有效性和可行性。     

不锈钢网架结构试验研究

对奥氏体不锈钢网架结构的物理力学性能、焊接性能加以分析，并进行了不锈钢焊接空心球节点承载力试验，确定了该种节点的受拉和受压承载能力。在此基础上，又做了不锈钢组合扭网壳模型的破坏性试验研究，试验结果与理论计算值比较，吻合较好。