Troubleshooting in geoelectrical prospecting using real‐coded genetic algorithm with chromosomal extrapolation

This work presents a genetic operator developed from mathematical methods of curve extrapolation applied in solving problems in geoelectrical prospection. This operator will assist the production of fitter individuals in the population of a genetic algorithm in which inherent patterns of the best individuals of each generation are recognized. The proposed operator in conjunction with a real‐coded genetic algorithm is compared to five alternative optimization techniques known and used in the application to problems in geoelectrical prospection. Copyright © 2014 John Wiley & Sons, Ltd.     

Adsorption for removal of Cd(II) from effluents

The adsorption of Cd(II) onto wollastonite has been reported. Adsorption increased from 55.7 to 93.6% by decreasing the concentration of Cd(II) from 2.0 x 10^‐4M to 0.5 x 10^‐4M. The rearranged Lagergren equation has been used for dynamic modelling of the process. However, the value of rate constant at 30°C was found to be 3.17 x 10^‐2min^‐1. Equilibrium modelling was carried out using the Freundlich isotherm equation and constants have been calculated. Thermodynamic studies were carried out and values of standard free energy (?G°), enthalpy (?H°) and entropy (AS°) were calculated at various temperatures. Low temperatures favour the uptake of Cd(II) in the process.     

Analysing green supply chain management practices in Brazil’s electrical/electronics industry using interpretive structural modelling

Industries need to adopt the environmental management concepts in the traditional supply chain management. The green supply chain management (GSCM) is an established concept to ensure environment-friendly activities in industry. This paper identifies the relationship of driving and dependence that exists between GSCM practices with regard to their adoption within Brazilian electrical/electronic industry with the help of interpretive structural modelling (ISM). From the results, we infer that cooperation with customers for eco-design practice is driving other practices, and this practice acts as a vital role among other practices. Commitment to GSCM from senior managers and cooperation with customers for cleaner production occupy the highest level.     

Measurement and exploration of individual beliefs about the consequences of building information modelling use

Information and communication technology (ICT) is becoming increasingly important in construction although the rate of adoption is considered slow and the industry faces specific implementation challenges. Mainstream information systems research has shown that individuals’ beliefs and expectations of the consequences of ICT use predict subsequent usage. We describe the development of scales to measure beliefs about the consequences of building information modelling (BIM) and their use in a survey of employees of a large construction contracting organization in the United Kingdom. Scales for performance expectancy, effort expectancy, social influence, facilitating conditions, compatibility, and attitude toward using technology were adapted from existing measures. In an analysis of responses from 762 construction employees the scales showed acceptable measurement properties. Expectations about the consequences of BIM use were broadly favourable although there is a need for more data for comparisons. The structure of the responses showed that expectations that BIM would enhance job performance were strongly related to expectations that BIM use was compatible with preferred and existing ways of working. Results also suggest that social influence is complex and may be multidimensional.     

Site managers’ daily work and the uses of building information modelling in construction site management

The use of building information modelling (BIM) and related software tools is increasingly expanding in the work of site managers in construction projects. The early uses of BIM in the actual tasks of site managers are explored by examining the utilization of BIM in their work and the challenges in the deployment of the new digital tools for traditional project collaboration. The ethnographic method of the study consists of shadowing the site managers’ work. The site managers actively used BIM and found it beneficial for their daily work. However, the use of BIM in construction sites is still limited because only a few managers have the competence to use BIM software tools, mobile tools are lacking, and the information content of the models needed for construction work is insufficient.     

Formulation and validation of a mathematical model for a naturally ventilated greenhouse with shading nets in warm and humid climate of India

A thermal model is developed to investigate the suitability of a simple, inexpensive and naturally ventilated greenhouse with shading nets in warm and humid climatic condition for off-season cultivation of vegetables like okra, cucumber, etc. during winter. These vegetables are generally grown during summer and the rainy season. The study was conducted from November 2011 to February 2012 in OUAT, Bhubaneswar, and Odisha where warm and humid climate usually prevails. Air temperatures inside the greenhouse with shading net were only 1–2°C higher during peak sunny hours and considerably 3–5°C more during night hours compared with ambient air temperatures. Lowering of air temperature during peak sunny hours and increasing during the night due to use of shading nets would become favourable for growing off-season vegetables in naturally ventilated greenhouse. Predicted values of air and plant temperatures were found to be in close agreement with experimental values.     

Wind characteristics and energy potential assessment in Akure,South West Nigeria: econometrics and policy implications

This paper analysed 11 years of daily mean wind-speed data, measured at Akure, Ondo State, Nigeria, using Weibull and Rayleigh distribution functions. While both distributions showed good agreements in extreme-value estimation patterns, investigation of their wind-speed characteristics modelling criteria, using goodness-of-fit statistics, revealed that the wind data followed the Weibull more than Rayleigh. Monthly wind-speed of Akure city ranged from 1.41 to 4.24 m/s by the Weibull fittings and from 1.40 to 4.16 m/s by the Rayleigh fittings. Overall results, of 2.71 m/s (Weibull) or 2.70 m/s (Rayleigh) mean wind-speed and 18.51 W/m² (Weibull) or 22.26 W/m² (Rayleigh) mean power density, indicated Akure a low wind-speed site, requiring low wind-speed turbine for generating wind energy. Econometric analyses of power output simulations using such turbine system resulted in affordable wind energy cost. These bear policy implications for sustainable wind energy usage in this and similar regions of the world.     

Relative Elevation Topographic Surface Modelling of a Large Alluvial River Floodplain and Applications for the Study and Management of Riparian Landscapes

This paper presents a novel and useful spatial modelling technique to create a topographic surface that estimates a floodplain's elevation relative to the average low-flow water surface elevation of a river channel. This model was applied to a 121 km study area of the middle Sacramento River, California, USA, where it was tested as a surrogate for observed water table depth and an observed 3.3 year recurrence interval flood inundation surface using independent data sets. The modelled relative elevation topographic surface correlated significantly (p < 0.005) to observed well water depths suggesting that the modelled surface reflected a reasonable approximation of vertical distance to the water table. Results from a flood inundation pattern analysis indicated an overall accuracy of 79% for correctly predicting inundated and non-inundated zones. The model was then used to measure relative channel bank height and the distribution of riparian plant communities to examine landscape ecological relationships.     

Design strategy for low-energy ventilation and cooling within an urban heat island

Natural ventilation is a proven strategy for maintaining thermal comfort in non-domestic buildings in the UK. The energy consumption and thus the carbon dioxide emissions that contribute to global warming are lower than in conventional air-conditioned buildings. However, the ambient temperatures in the UK have risen over the last decade and new climatic data for use in the design of naturally ventilated buildings has been published. Using these data and dynamic thermal modelling, it is shown that passive stack ventilation alone was unlikely to maintain summertime comfort in a proposed University College London building within an urban heat island. The stack ventilation strategy was evolved by the introduction of passive downdraught cooling. This low-energy technique enables cooled air to be distributed throughout the building without mechanical assistance. The underlying principles of the technique were explored using physical models and the anticipated performance predicted using thermal modelling. The architectural integration is illustrated and the control strategy described. The resulting building is believed to be the first large-scale application of the passive downdraught cooling technique; construction began in late 2003.     

刚性网格索穹顶结构的模型试验研究

通过对一直径6m的刚性网格索穹顶结构试验模型进行预应力张拉成形、竖向对称加载与非对称加载试验,研究该结构模型在静载下的力学性能。应用非线性有限元数值计算方法建立刚性网格索穹顶结构的计算模型,对结构的静力学性能进行理论计算与分析,并与试验结果进行比较。结果表明:在各加载阶段,试验模型节点竖向位移实测值与理论计算结果较接近,拉索索力实测值与计算结果吻合较好,证明模型设计和试验方法合理,理论计算方法正确。