基于随机相位误差Tikhonov分布的MC-DS-CDMA系统性能分析

本文针对工作于慢变频率选择性Rayleigh衰落信道中的部分相干的MC-DS-CDMA系统，基于随机相位误差的Tikhonov密度分布提出了误码率上边界的一种分析方法。仿真结果表明，随着环路信噪比的增加，相位误差损耗所产生的系统误码率性能损失变得越来越小，当环路信噪比高于系统信噪比(Eb/N0)20dB时，系统误码率性能损失小于0．2dB。在MC-DS-CDMA系统中，由于能用频率分集取代路径分集，因而接收机结构更易实现。     

Optimization of support positions to maximize the fundamental frequency of structures

In this paper, the position optimization of simple supports is implemented to maximize the fundamental frequency of a beam or plate structure. Both elastic and rigid supports are taken into account. First, the frequency sensitivity with respect to the movement of a simple support is derived using the discrete method. By means of the shape functions of the finite element method, closed‐form sensitivity formulations are developed straightforwardly. Then, a heuristic approach, called evolutionary shift method, is presented for optimizing support positions with a fixed grid mesh scheme. Based on the design sensitivity analysis, the support with the highest efficiency is shifted in priority along the elementary edges with the interval (step) of the elementary size. To facilitate the convergence of the process, the interpolation technique is employed to evaluate the solution more accurately. Finally, three numerical examples are presented to demonstrate the validity of the sensitivity analysis and the effectiveness of the optimization method. Copyright © 2004 John Wiley & Sons, Ltd.     

幅频特性的数学分析

根据数控装置检测系统中传感器信号电路工作要求,以共射电压放大电路为例,分别考虑耦合电容、旁路电容、结间电容和分布电容对不同信号频率的作用,分析了电路的低频特性和高频特性,给出了上下限截止频率的解析式.由此得出,电路其他参数一定时,在低频段,下限截止频率与耦合电容、旁路电容成反比,在高频段,上限截止频率与等效输入输出电容成反比,从而为传感器系统设计提供理论依据.     

Schwingfestigkeit von Schraube‐Mutter‐Verbindungen

High cycle fatigue of bolted connections Extensive tests regarding the influences on the fatigue of bolt‐nut‐connections of preloading with torsion, of preloading with yielding, of loading with superimposed bending and of the tested lot are processed. These influences are not yet known according to VDI 2230. New testing devices were designed for these tests, which allow a far less expensive operation and may easily be used for bolts of diameters up to M100 and testing frequencies up to 1000 Hz. The validity of fatigue resistance according to VDI 2230 is specified with respect to the test results. The determined influence of the tested lots is unexpectedly high. The manufacturing process of bolts should be improved to minimize this influence.     

ISIS全局优化多道反演技术在墩2块岩性油藏描述中的应用

为进一步落实墩2块戴一段岩性油藏成藏规模及分布规律，针对该储层薄、横向变化快的特点，利用ISIS全局优化多道反演技术，对该构造区岩性储层进行了精细描述，较好的预测出戴一段储层平面分布规律。     

GM300电台的调试原理及方法

GM300电台是一种性能优良的电台，目前在我国的地震勘探领域广泛应用。与其它类型的电台相比，GM300电台的调试方法完全不同。掌握其调试原理及方法是对该类电台进行正确维护的基础。本文从分析GM300电台调试原理入手，总结了该电台的调试方法。     

Pool boiling on a superhydrophilic surface

Titanium Dioxide, TiO₂, is a photocatalyst with a unique characteristic. A surface coated with TiO₂ exhibits an extremely high affinity for water when exposed to UV light and the contact angle decreases nearly to zero. Inversely, the contact angle increases when the surface is shielded from UV. This superhydrophilic nature gives a self-cleaning effect to the coated surface and has already been applied to some construction materials, car coatings and so on. We applied this property to the enhancement of boiling heat transfer. An experiment involving the pool boiling of pure water has been performed to make clear the effect of high wettability on heat transfer characteristics. The heat transfer surface is a vertical copper cylinder of 17 mm in diameter and the measurement has been done at saturated temperature and in a steady state. Both TiO₂-coated and non-coated surfaces were used for comparison. In the case of the TiO₂-coated surface, it is exposed to UV light for a few hours before experiment and it is found that the maximum heat flux (CHF) is about two times larger than that of the uncoated surface. The temperature at minimum heat flux (MHF) for the superhydrophilic surface is higher by 100 K than that for the normal one. The superhydrophilic surface can be an ideal heat transfer surface. Copyright © 2002 John Wiley & Sons, Ltd.     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

自动线性跟踪Butterworth有源滤波器研究

滤波是通信、测试、数据采集和实时控制等领域至关重要的环节。通常的模拟滤波器，由于截止频率固定，在某些宽频率动态范围且有实时性要求的应用场合，往往达不到预期的滤波效果，有时甚至影响整个系统的正常运行。本文从有源滤波器的机理分析入手，提出了一种由单片机参与的滤波系统，它能自动跟踪输入信号频率，线性地选择合适的滤波器截止频率，弥补了原有滤波器的不足。     

高效率平面磁控溅射器的研制

介绍一种新型磁控溅射装置。它采用两块极性相对的环状磁铁的设计方法，通过扩大靶表面的等离子放电区域面积，使传统磁控溅射枪使用中经常受到的两个限制──溅射速率与靶的利用率得到了较大的改善。实验中铜靶在溅射功率密度为11W／cm~2时溅射速率约为800nm／min，如果继续提高功率则可获得更高的速率。而靶的利用率可达64％左右。另外，在认为出射粒子符合cos~nθ分布的前提下，发现当n＝3．3时，实验数据和理论数据符合得较好。