Heat transfer mechanism of a swirling impinging jet in a stagnation region

Heat transfer characteristics of a swirling impinging jet have been experimentally examined using a combined particle image velocimetry (PIV) and laser‐induced fluorescence (LIF) technique for simultaneous measurement of velocity and temperature fields. The present study shows that the radial width of the jet stretches with increasing swirl intensity, and that the stretching phenomenon contributes to the maximum local heat transfer coefficient. At the stagnation region, the flow near the heated surface is mixed intermittently by reverse flows toward upstream, and spatial distributions of temperature are correlated with instantaneous velocity vector maps. The dynamic behavior of recirculation zones, attributed to swirl number Sw and impinging distance, mainly determines the turbulent heat transfer at the stagnation region. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 663–673, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10120     

形状记忆聚氨酯的结构与性能研究

以 2 ,4 -甲苯二异氰酸酯 (2 ,4 -TDI)、不同分子量的聚己二酸丁二醇酯 (PBAG)和 1,4-丁二醇 (BDO)为原料合成了具有形状记忆功能的聚氨酯材料。通过DSC、弯曲实验和力学实验 ,研究了形状记忆聚氨酯的性能 ,发现软段高度结晶和硬段聚集形成硬段微区是其具有较好形状记忆性能的必要条件。     

基于TiNi合金的超弹性对其相关磨损机制的FEM研究

本文在重点考虑TiNi合金高弹性变形量的前提下，采用等向强化模型，对不锈钢和超弹TiNi合金在法向接触载荷作用下的六种模型进行了有限元(FEM)分析。结果表明：在相同载荷条件下，超弹TiNi合金产生的von Mises弹性应变要高于不锈钢，但其von Mises应力和塑性应变却恰恰相反，在同一载荷下该合金发生塑性变形的区域要小于不锈钢；此外，超弹TiNi合金发生塑性变形要比不锈钢困难，所需的临界载荷值随其最大弹性变形量(屈服点处的应变值)的增加而增加。最后，基于本文的有限元计算结果对超弹TiNi合金的蘑粒磨损和疲劳磨损机制进行了讨论。     

中板板形控制及数学模型

分析讨论了采用头尾补偿宽度法(简称补偿宽度法)控制板形的方法及步骤，并给出了其数学模型。补偿宽度法是简单易行的中板平面形状控制的有效方法。     

测井曲线拐点在测井层序地层分析中的应用研究

在层序地层学研究中，层序界面的划分是基础和重要的环节，而利用测井资料分析可以进行层序界面划分和进行较长期基准面旋回识别。测井曲线的值是深度的函数，测井曲线的一阶导数表示了曲线变化的趋势和变化的快慢，在某一范围内，当一阶导数呈现符号转换时，相对应的深度点的测井值即为该范围内极大（极小）值；测井曲线的二阶导数则表示曲线的凹凸性，在某一范围内，当二阶导数呈现符号转换时，相对应的深度点代表了测井曲线的拐点，即反映曲线凹凸性变化的转折点，亦即地层的分界面。基于以上特点，提出利用测井曲线拐点进行层序界面划分的原理和方法，并结合岩心和录井资料，对白音查干凹陷达28井腾格尔组不同级次沉积旋回、地层垒积、旋回特征随沉积厚度变化特点和不同级次基准面旋回进行研究，最后得到该地层单井测井层序地层分析结果。     

基于轮廓线匹配的二维重迭物体的识别

本文提出一种基于轮廓线匹配的二维重迭物体的识别算法,并采用一种点模式匹配的快 速算法进行特征点序列的匹配,通过引进形状移位数的概念和利用问题中的各种约束条件,提 高了物体识别速度.     

Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

纯镁对碳化硼颗粒的常压浸渗

本文研究了纯镁对不同致密度的碳化硼(B₄C)颗粒基片的常压浸渗性;讨论了镁液对B₄C颗粒聚集体常压浸渗的影响因素;提出了浸渗模型。研究表明,纯镁在氩气保护下,800～850℃温度范围保温30min即可浸渗B₄C颗粒聚集体。浸渗深度和宽度随加热温度升高和保温时间延长而增加;常压浸渗的B₄C_P/Mg复合材料具有很高的硬度,B₄C颗粒在基体中分布较均匀。     

Orientation-based unique representation for planar curves and shapes

This paper presents an orientation-based representation for planar curves and shapes. The new representation can uniquely represent all types, of planar shapes, be it convex, nonconvex, polygonal, smoothly curved, or piecewise smooth shapes. It is based on a new parameterization, theabsolute integral orientation. This representation is invariant under translation and rotation. The absolute integral orientation is a parameter invariant under scaling. As a result, matching of similar shapes (i.e., determination of the relative orientation and the scaling factor) using the absolute integral orientation as the parameter is easier than using the arclength as the parameter. In addition, the new representation has the feature of adaptive sampling, making it more compact and efficient than arc-length-based representations.