等离子体条件下煤基富勒烯的制备及生成机理

以淄博贫煤为原料，用射频等离子体法合成碳纳米管（carbon nanotubes，CNTs）和纳米洋葱状富勒烯（nano—structured onion—like fullerenes，NSOFs），运用场发射扫描电子显微镜（FE—SEM）和高分辨透射电子显微镜（HRTEM）对产物进行了表征和分析．结果表明：以淄博贫煤为原料制备出CNTs和NSOFs，CNTs直径分布均匀，约为10nm左右，准球状的NSOFs直径分布在8nm-30nm之间，石墨化程度较高；并对不同变质程度的煤制备富勒烯的生成机理进行了比较与讨论．     

微波技术在分析化学中的应用进展

综述了近10年来微波技术在分析化学领域中的应用,详细介绍了微波消解和微波萃取在分析化学中的应用进展。     

低温等离子体技术在纺织品染色中的应用

等离子体处理技术能明显提高处理后织物的染色性能。本文主要简述了等离子体技术的概念、提高纺织品的染色性能的处理方法、原理及其在各种纤维上的应用。从长远看，等离子体处理在纺织品染色中具有广泛的应用潜力。     

The role of pressure on thin amorphous carbon films deposited using microwave surface wave plasma CVD

We report the effects of gas composition pressure (GCP) on the optical, structural and electrical properties of thin amorphous carbon (a-C) films grown on p-type silicon and quartz substrates by microwave surface wave plasma chemical vapor deposition (MW SWP CVD). The films, deposited at various GCPs ranging from 50 to 110 Pa, were studied by UV/VIS/NIR spectroscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and current–voltage characteristics. The optical band gap of the a-C film was tailored to a relatively high range, 2.3–2.6 eV by manipulating GCPs from 50 to 110 Pa. Also, spin density strongly depended on the band gap of the a-C films. Raman spectra showed qualitative structured changes due to sp³/sp² carbon bonding network. The surfaces of the films are found to be very smooth and uniform (RMS roughness < 0.5 nm). The photovoltaic measurements under light illumination (AM 1.5, 100 mW/cm²) show that short-circuit current density, open-circuit voltage, fill factor and photo-conversion efficiency of the film deposited at 50 Pa were 6.4 μA/cm², 126 mV, 0.164 and 1.4 × 10^− 4% respectively.     

Surface and Interfacial Studies of Plasma-Modified Composite Surfaces

Model epoxy and bismaleimide compounds in thin film form were used to simulate epoxy and bismaleimide composite surfaces, in order to study compositional changes and interfacial reactions induced by oxygen plasma treatment. X-ray photoelectron spectroscopy (XPS) and infrared reflection-absorption spectroscopy (IR-RAS) were used to probe chemical changes which occurred. XPS and IR-RAS were found to be complementary techniques in determining the nature of functional groups incorporated into surfaces by plasma treatment. IR-RAS analysis of the model surfaces following exposure to a liquid epoxy resin revealed that while adsorption of the liquid epoxy occurred on both plasma-treated and nonplasma-treated surfaces, the oxygen plasma-treated surface alone was capable of initiating ring-opening reactions in the epoxy. However, this effect was not observed unless immediate contact was made between the plasma-treated surface and the liquid epoxy resin, illustrating the short-lived reactivity of the functional groups on the plasma-treated surface.     

Evaluation of some of the properties of plasma treated wool fabric

Low temperature plasma (LTP) treatment was applied to wool fabric with the use of a nonpolymerizing gas, namely oxygen. Properties of the LTP‐treated samples including low stress mechanical behavior, air permeability, and thermal characteristics were evaluated in this study. Kawabata evaluation system fabric (KES‐F) was employed to determine the tensile, shearing, bending, and compression strength properties and surface roughness of the specimens. The changes in these properties are believed to be closely related to the interfiber and interyarn frictional force induced by the LTP. The decrease in the air permeability of the LTP‐treated wool fabric was found to be probably because of the plasma action effect on increasing the fabric thickness and a change in fabric surface morphology, which was confirmed by scanning electron microscopy micrographs. The change in the thermal properties of the LTP‐treated wool fabric was in good agreement with the earlier findings and can be attributed to the amount of air trapped between the yarns and fibers. This study suggested that the LTP treatment can influence the final properties of the wool fabric, and also provide information for developing LTP‐treated wool fabric for industrial use. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5958–5964, 2006     

激光重熔等离子喷涂Al2O3陶瓷层的相转变

研究了锌铝基Al2O3陶瓷层激光重熔区内陶瓷相的转变。采用METCO 4MP等离子喷涂机对基体材料表面喷涂氧化铝(Al2O3的质量分数为99％)陶瓷层。采用上海光学精密机械研究所HJ-4工业用横流CO2激光器进行激光重熔。通过X射线衍射分析和透射电镜对Al2O3陶瓷的微观结构、成分和分布的研究，得到以下结论：在等离子喷涂过程中，喷涂层中陶瓷相发生。α-Al2O3→γ-Al2O3 α-Al2O3的转变。激光重熔后，试样表层的原α-Al2O3陶瓷相、γ-Al2O3陶瓷相均转变为δ-Al2O3陶瓷相，为体心四方结构．熔池区陶瓷相主要分布在表层，次表层和过渡区。     

碳纤维经氧等离子/KH550处理后的表面形态和结构

碳纤维(CF)表面经氧等离子、KH550和 LiAlH_4处理后,其物理和化学性能得以改善.由于提高了 CF 和树脂间的联结,使 CF 复合材料的层间剪切强度提高50%以上,在湿热下的强度保留率达94%以上.使用纤维接触角测定仪,SEM 和 XPS 等对 CF 表面的浸润性、形态和化学组成进行了研究.实验指出:CF 经等离子和 KH550处理后,其临界表面能有了提高;CF 本身仅受氧离子刻蚀,故其拉伸强度的损失小于其他处理方法.     

Oxygen plasma modification of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) film surfaces for tissue engineering purposes

Plasma glow‐discharge application is known as a technique to coat or modify the surfaces of various materials. In this study, the influence of oxygen rf‐plasma treatment on surface and bulk properties of a biological polyester, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), were studied by determining water content and water contact angle, and by using X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The plasma‐treated films absorbed more water than the untreated film, and the absorbance increased with the total power applied. The water contact angles decreased and O/C atomic ratio increased on treatment, indicating that the material became more hydrophilic due to increases in the oxygen‐containing functional groups on the surface of the polymer. A direct relation could be observed when the O/C ratio was plotted against the total power applied (treatment duration × treatment power). SEM revealed a visual record of surface modification, the extent of which increased with increased total power. It was thus possible to alter the surface chemistry and relevant properties of the polymer film using oxygen plasma as a tool. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1285–1289, 2003     

高压脉冲放电等离子体降解苯酚废水

考察了多种因素对高压脉冲放电低温等离子体降解水中苯酚效果的影响。降低放电电极直径、放电距离、废水的电导率和提高废水的pH值以及向废水中通气体和加入硫酸亚铁等均可提高废水中苯酚的降解速率 ,而加入碳酸钠则会降低苯酚的降解速率。初始质量浓度为 10 0mg/L的苯酚废水经放电处理 180min后降解率达 5 0 9%。