硅丙涂料的现状及发展趋势

介绍了硅丙涂料在国内外市场的生产及需求现状,指出了硅丙涂料产品的发展方向。     

Low-Thermal-Conductivity Rare-Earth Zirconates for Potential Thermal-Barrier-Coating Applications

Rare-earth zirconates have been identified as a class of low-thermal-conductivity ceramics for possible use in thermal barrier coatings (TBCs) for gas-turbine engine applications. To document and compare the thermal conductivities of important rare-earth zirconates, we have measured the thermal conductivities of the following hot-pressed ceramics: (i) Gd₂Zr₂O₇ (pyrochlore phase), (ii) Gd₂Zr₂O₇ (fluorite phase), (iii) Gd_2.58Zr_1.57O₇ (fluorite phase), (iv) Nd₂Zr₂O₇ (pyrochlore phase), and (v) Sm₂Zr₂O₇ (pyrochlore phase). We have also measured the thermal conductivity of pressureless-sintered 7 wt% yttria-stabilized zirconia (7YSZ)—the commonly used composition in current TBCs. All rare-earth zirconates investigated here showed nearly identical thermal conductivities, all of which were ∼30% lower than the thermal conductivity of 7YSZ in the temperature range 25°–700°C. This finding is discussed qualitatively with reference to thermal-conductivity theory.     

超长余辉蓄能发光涂料的制备

通过选用透明度高、太阳能吸收率高的丙烯酸树脂和高亮度、长余辉时间的镝和铕稀土离子共掺杂的稀土硅酸盐光致发光粉末材料aCaO·bZnO·cBaO·dMgO·nSiO2:Eu,Dy,制备出了具有较强的蓄光能力和较长发光时间的夜光涂料,并论述了其制备方法和特性。     

氧化铝增强无机硅酸锌涂层的电化学阻抗谱研究

无机硅酸锌涂层是一种广泛使用的钢铁重防腐涂层。采用在涂料填料中加入氧化铝的方法可以得到具有更好耐磨性能的富锌涂层。本实验研究利用电化学阻抗谱法(EIS)研究了氧化铝的加入对涂层腐蚀防护性能的影响,结果表明氧化铝颗粒的加入使涂层的腐蚀防护性能略有提高。     

Soft and Hard Adhesion

The force needed to pull a cylindrical stud from a soft elastomeric film depends on their elastic and geometric properties. For a rigid stud and a thick elastomeric film, the pull-off stress (σ) depends on the elastic modulus (E) of the film and the radius (a) of the stud as σ ∼ (E/a)^1/2 (soft adhesion). However, when the film is very thin, the pull-off stress is significantly higher than the case with thick films, and its value depends on the elastic modulus and the thickness (h) of the film as σ ∼ (E/h)^1/2 (hard adhesion). Here, we study the pull-off behavior of a soft cylindrical stud, one flat end of which is coated with a high modulus thin baseplate. As the flexural rigidity of this baseplate is varied, we observe the transition between the two types of adhesion. We present a simple physical interpretation of the problem, which could be of value in understanding various biofouling and adhesive situations.     

Epoxidation of β-ionone using molecular oxygen over Pt/MCM-41 catalyst under mild conditions

The epoxidation of β-ionone over the Pt/MCM-41 catalyst using molecular oxygen in the liquid phase had been studied. The results indicated that the β-ionone was catalytically oxidized to 5,6-epoxy-β-ionone, 4-oxo-β-ionone, 4-hydroxy-β-ionone and dihydroactinidiolide using molecular oxygen as the sole oxidant. The effects of solvent, content of Pt, reaction temperature and time on the catalytic activity and product selectivity had also been investigated in detail.     

A Semi‐Batch Process for Nitroxide Mediated Radical Polymerization

Summary: A semi‐batch process using nitroxide mediated polymerization, was explored for the design of low molecular weight solvent‐borne coatings, typical of those used in the automotive industry. While living radical polymerization (LRP) offers many advantages in the control of polymer chain microstructure that may confer important physical and chemical property benefits to coatings, adapting LRP to a semi‐batch process poses significant challenges in the design and operation of the process. Using styrene monomer, various two‐component initiating systems (free radical initiator, 4‐hydroxy‐TEMPO) were studied to understand the effects of different initiators on the course of polymerization. In addition, an alkoxyamine was synthesized and used as the initiating source. The initiators Luperox 7M75 and Luperox 231 give higher polymerization rates and reasonable control over polymerization, while benzoyl peroxide (BPO), Vazo 67, and the alkoxyamine are less effective. The number of polymer chains in the final product is always less than the theoretical value, reflecting poor initiation efficiency, probably resulting from undesirable termination reactions that become important due to the nature of the semi‐batch process. Adding camphorsulfonic acid (CSA) or charging initiator concurrently with monomer during semi‐batch feed, can increase the polymerization rate while maintaining the living character of the polymerization. The copolymerization of styrene and butyl acrylate is also shown to exhibit living character.

Schematic representation of the exchange reaction to produce N‐TEMPO capped polymer chains.     

纳米技术在涂料中的产业化应用

介绍了国内外纳米涂料的现状及其产业化进展。     

异氰酸酯改性光敏水性环氧丙烯酸酯的合成

以双酚A型环氧树脂与丙烯酸反应合成了具有羟基侧基的环氧丙烯酸酯，再用甲苯二异氰酸酯与内烯酸-β-羟乙酯的半加成物对上述环氧丙烯酸酯树脂进行接枝改性，再用酸酐引入羧基，经胺中和后，水性化．可得较为稳定的自乳化光敏树脂水分散体系。通过化学测试和IR解析．确定了合成条件、合成终点及产物结构，并以此为基料配成紫外光固化涂料，所得涂层性能优异。     

罩面金属氟碳涂料的配方设计及应用

介绍了氟碳金属涂料和氟碳罩面清漆的参考配方、生产工艺,探讨了罩面金属氟碳涂料配方的设计及喷涂效果,表明金属氟碳漆罩清漆效果良。