含葡萄糖基水溶性硫化黑的合成

本文以C.I.硫化黑1为原料,经葡萄糖还原成隐色体后,再与葡萄糖缩合,合成出含葡萄糖基水溶性硫化黑。合成方法分别采用了焙烘法和水介质中合成。结果表明,水介质中合成的含葡萄糖基水溶性硫化黑溶解度好于焙烘法。     

佛山市中心组团桥梁群对河道影响的数值分析

在不同频率流量和阻水程度条件下,采用一维明渠非恒定流网河数学模型,分析规划中的佛山市桥梁群对区间河道洪季行洪、枯季水环境的影响,计算洪季不同频率洪峰流量下规划桥梁群对区间河道行洪洪水位、分流比的影响,枯季时规划桥梁群对区间河道过流量、分流比的影响,结果表明,利用一维网河数学模型计算佛山市中心组团规划桥梁群对区间河道断面平均水位、流量和流速的影响,结果有足够的数值精度,是可信的。     

A simple polyol synthesis of silver metal nanopowder of uniform particles

Silver metal has been synthesized in form of a finely divided loose nanopowder, 10–30 nm particle sizes, using a simple polyol process. In hot water, polymer molecules of polyvinyl alcohol (PVA) induce Ag⁺ → Ag reaction as a weak reducer (suitable to control the final particle size), forming a nanofluid of Ag nanoparticles in situ dispersing in part of PVA molecules. Ag nanoparticles do not aggregate much when casting a viscous Ag–PVA nanofluid (hot) onto a substrate in thin laminates or films. Freestanding Ag–PVA films could be obtained of 1–5 mm thickness after drying at room temperature. Dried sample can be easily peeled from a silicate glass substrate. As small as 5–10 mm Ag–PVA pieces were heated in air in order to recollect Ag nanoparticles by burning off the polymer. At 300–400 °C, Ag–PVA disintegrates and encounters combustion in air, resulting in a pure Ag-powder. As analyzed by X-ray diffraction, a single crystalline phase of an Fm3m cubic crystal structure formed. Lattice parameter a = 0.4071 nm and density ρ = 10.61 g/cm³ compare well the bulk values a = 0.4086 nm and ρ = 10.50 g/cm³.     

横向各向同性介质中的初至波旅行时计算

本文直接采用Thomsen导出的横向各向同性介质中的相速度、群角与相角、群速度与相速度的精确函数关系,提出了一种新的具有任意各向异性强度的横向各向同性介质中的初至波旅行时计算方法,它不同于Faria等人给出的采用群速度近似公式(Byun)的仅适应弱各向异性的初至波旅行时计算方法。该新算法在计算具有任意各向异性强度的横向各向同性介质中的初至波旅行时时,并不显著地增大计算时间。分析对比由新算法得到的初至波旅行时的等值线图和由交错网格有限差分波场模拟得到的波场快照表明,无论是对弱各向异性还是对强弱各向异性,新算法都具有较高的精度;随着各向异性强度的增大,新算法的计算结果与采用近似公式计算结果的差值也随之增大。     

Emission of trace toxic metals during pulverized fuel combustion of Czech coals

A study of the trace elements emission (As, Se, Cd, Co, Cr, Cu, Zn, Hg, Tl, Pb, Ni, Sn, Sb, V, Mn and Fe) from pulverized coal combustion has been made at six heating and power stations situated in the Czech Republic. The amount of chlorine in coal has considerable influence on volatilization of some elements such as Zn, Cu, Pb, Hg and Tl, which is explained by the formation of thermodynamically stable compounds of these elements with chlorine. Generally, the affinities for Cl follows the order Tl > Cu > Zn > Pb > Co > Mn > Sn > Hg. The experimental data indicates enrichment of some of the trace toxic elements in the emissions (Cu, Zn, As, Se, Cd, Sn, Sb, Hg and Pb) and good agreement was obtained by thermodynamic equilibrium calculations with a few exceptions. In the case of Fe, Mn, Co, Cr and Sn calculated values are overestimated in the bottom ash and there are zero predicted amounts of these elements in the fly ash. In comparison, the results from experiments show up to 80% of these elements retained in fly ash. This implies that there exist additional steps leading to the enrichment by Fe, Mn, Co, Cr and Sn of small particles. Such mechanisms could include the ejection during devolatilization of small inorganic particles from the coal of bottom ash particles, or disintegration of the char containing these metals to small particles of fly ash. On the other hand, there are slightly overestimated or similar values of relative enrichment factors for As, V, Cu, Cd, Sb, Tl and Pb in the fly ashes and zero predicted values for bottom ashes. Our experimental results show about 5% or less of these elements are retained in bottom ashes, so they probably remain in the bottom ash inside unburned parts of coal. Copyright © 2003 John Wiley & Sons, Ltd.     

The ability of the Millon Clinical Multiaxial Inventory--Third Edition to detect malingering.

This study investigated the ability of the Millon Clinical Multiaxial Inventory--Third Edition (MCMI-III) to discriminate students malingering psychopathology (n=106) from bona fide psychiatric inpatients (n=202). Students were randomly assigned to a fake-bad or an honest-responding condition. Analyses investigated the ability of the modifier indices to discriminate fake-bad group participants from the psychiatric inpatients. Scale X raw cutoff score >178 yielded a positive predictive power (PPP) of 0.0, a negative predictive power (NPP) of 63.1, and a hit rate of 63.1%. Optimal cutoff scores were developed. Scale X Base Rate (BR) >84 provided a PPP of 55.6, an NPP of 72.1, and a hit rate of 65.2%. Scale Y BR     

大塑性变形制备纳米结构金属

细化晶粒是改善材料性能的有效手段，传统的压力加工技术(如轧制、挤压、拉拔和锻造等)可以细化晶粒(微米量级)。纳米结构金属由于具有很小的晶粒尺寸(20-500nm)和独特的缺陷结构，从而表现出优异的物理—力学性能。大塑性变形(SPD)具有将铸态粗晶金属的晶粒细化到纳米量级的巨大潜力，近年来已引起人们的极大关注。介绍了4种大塑性变形制备纳米结构金属的方法、原理、变形特点及应用，分析了纳米结构金属的强度和超塑性变形特征，以及当前研究中存在的主要问题，并对大塑性变形技术的应用前景进行了展望。     

Single axioms for odd exponent groups

With the aid of automated reasoning techniques, we show that all previously known short single axioms for odd exponent groups are special cases of one general schema. We also demonstrate how to convert the proofs generated by an automated reasoning system into proofs understandable by a human.Authors supported by NSF Grant DMS-9100665     

Electrical/electronic effects of titanium and iron impurities in EFG and FZ solar cell silicon: SPV/EBIC analysis

In this paper results on surface photovoltage (SPV) and electron beam induced conductivity (EBIC) studies of edge-defined film-fed growth (EFG) and floating zone (FZ) silicon solar cell materials (both p-type) are presented. A systematic comparison based on minority carrier diffusion length and carrier recombination is made between: (i) samples contaminated with Ti and/or Fe, (ii) samples gettered by phosphorous diffusion, and (iii) as-received samples. Deep level transient spectroscopy (DLTS) measurements, together with the iron-boron (FeB) pairing kinetics [1] have successfully been used to detect the presence of Fe in the samples. Even though this process is effective in revealing Fe impurities in p-type FZ silicon it is evidently not suitable for Fe identification in p-type EFG silicon. Ti, like Fe, is found to be a prominent lifetime-limiting metallic impurity in both EFG and FZ silicon. Phosphorous diffusion is proven to be an effective external gettering technique for fast-diffusing impurities such as Fe, but not for Ti.