Prediction of High-Temperature Long-Term Strength for Damaged Structures

A method is proposed for analytical estimation of the high-temperature long-term strength of structures with material discontinuities, which are stress raisers. We consider the processes involving the formation of diffusion pores. Diffusion processes in metals are strongly enhanced with increasing temperature and stresses.     

Zr-2/Cr反应扩散研究

研究了Zr-2/Cr扩散偶在1023－1123K范围内的反应扩散，用扫描电镜观察反应宽度，用能谱仪（EDS）测定了反应层Zr,Fe和Cr沿扩散方向的浓度分布，研究了反应层的生长动力学，结果表明，反应层生长基本符合抛物经规律，生长过程受扩散控制，用Boltzman-Matano-Heumann模型计算了Cr在反应层Zr（Fe,Cr）2中的互扩散系数D，得到了互扩散系数D与温度的Arrhenius方程，由计算的扩散数据与Cr在Zr中形成稀固溶体时Cr的扩散数据比较可知，Cr在金属间化合物Zr（Fe,Cr）2中的扩散比在稀因溶体中的扩散快5个数量级。     

MOS控制晶闸管的三重扩散工艺研究

本文对ＭＣＴ的核心工艺－三重扩散工艺进行了详细研究。通过ＳＵＰＲＥＭ－Ⅲ计算机工艺仿真，获得了三重扩散的工艺条件。     

Failure analysis of a hot extrusion die used for Al-Li alloy processing

Al-Li alloys being developed as lighter, substitutes for conventional high strength Al alloys are to be processed by routine methods. During extrusion of a 8090 Al-Li alloy, the extrusion die container failed causing some alarm. This failed die container was analysed to examine if the failure was caused by interaction of Li diffusing out of Al-Li alloy with the carbides of die steel. The evidence, although not conclusive, is sufficient to exercise caution during such processing.     

氩离子激光泵浦的掺钛宝石激光器研究

本文报导用氩离子激光连续泵浦的掺钛宝石(Ti~(3+),Al_2O_3)可调谐固体激光器的实验结果。泵浦光为全谱线,基模,激光器采用消象散的折叠谐振腔结构,获得基模激光输出功率0.67W,效率大于10.8％,可调谐范围为735nm～900nm。     

Responses of practicing psychologists to a web site developed to promote empirically supported treatments.

Increased adoption of empirically supported treatments (ESTs) has been hindered in part by inadequate and inconvenient access to EST information and training. To improve diffusion of ESTs, the authors developed a Web application to provide practitioners with concise information by disorder on ESTs. The resulting site, therapyadvisor.com, was evaluated by 239 practicing psychologists to assess the usefulness of the site and explore possible interactions of EST attitudes on ratings of usefulness and impact. Two thirds of participants indicated using ESTs in practice, and limited time and resources were cited as primary barriers to EST adoption. The Web application was rated positively by most participants and was reported to increase awareness of and commitment to try ESTs among approximately 60% of participants. The results of this project support the feasibility of a Web application to increase diffusion and promote further adoption of ESTs. Technological and e-learning advances are promising directions for encouraging the adoption of ESTs specifically and evidence-based practice generally, particularly among busy practitioners who have inadequate time and resources for more traditional forms of dissemination and training. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Validation of a Method of Determination of Apparent Diffusivity Versus Composition in Solids

A method is presented for computing the values of apparent diffusivity in solids with respect to the concentration of the diffusing substance (water or sodium chloride). This method does not require any assumption upon the mathematical relationship between diffusivity and concentration. It can be applied to experimental measurements of local concentration versus position within the solid (profiles) with relatively few measurements (circa 10) and a mathematical smoothing of the experimental data by using an artificial neural network model. The method was first validated on simulated data obtained by using a constant diffusivity value and on experimental profiles when the relation between diffusivity and concentration was given. It was then applied to original experimental moisture profiles obtained by putting gelatin gels with different initial moisture contents into contact for up to 14 days. The method was also successfully applied to five sets of experimental moisture and sodium chloride profiles taken from the literature and obtained from different food products. Apparent diffusivities calculated by our method were found in agreement with those obtained by authors using different numerical methods to compute the diffusivity values.     

The radiation crosslinking and scission of ethylene-propylene copolymers studied by solid-state nuclear magnetic resonance

Methyl groups from chain scission and H-crosslinks have been identified by solid-state nuclear magnetic resonance in amorphous ethylene-propylene copolymers containing 23 and 36 mole % propylene after γ-irradiation to 10 MGy at 30°C. G (scission) and G (crosslink) values determined from the n.m.r. spectra and by extraction are in agreement, which suggests that the crosslinks are not clustered. This may differ from the situation in polyethylene where there is a substantial crystalline content. G(S). G(X) and the ratio G(S)/G(X) increase with increasing propylene content of the copolymers.     

基于连续性扩散流的湿地表面水流动力学模型

受表面密生植被的影响,湿地表面流总是处于高阻力、低流速状态。湿地表面流的水流动力学方程中,其水流加速度项相对于地表高密度植被造成的高阻力项相比,可以忽略。由此,以水流连续性方程和忽略加速度项的水流动力学方程为基础,构建基于连续性扩散流的湿地表面流动力学模型。该模型是一个抛物型偏微分方程,相对于描述一般径流流态的圣维南双曲型偏微分方程组而言,其求解过程相对容易。模型中的表面流流量采用修正的曼宁方程描述,表面糙率采用已有经验公式,数值计算方法采用六点差分格式。模拟结果表明,该模型能够体现湿地表面流的高阻力、低流速特征。水深越浅,水流模式变化越慢,水深越大,表面流受植被阻力越小,水流模式变化越快。     

以不同PAN系炭纤维布制备燃料电池气体扩散层之研究

采用石墨化PAN系炭纤维布制备了高分子电解质燃料电池气体扩散层。通过电学实验、X-ray绕射与元素分析考察了所制气体扩散层的性能。结果表明：随热处理温度的升高，气体扩散层的电阻率降低，L2增加，d（x）2减小。高温处理后的炭纤维布作为高分子电解质燃料电池气体扩散层显示了较高的电池效能。